# Two-Peg Test for Level - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Two-Peg Test for Level, Measuring Vertical Angle, Calculate Horizontal Distances, Plane of Collimation, Bench Mark, Automatic Level, Height of Collimation Method, Trapezoidal Rule

# Bowditch’s Method - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Bowditch’s Method, Open Traverse Survey, Accuracy of Traverse, Tacheometric Survey, Theodolite Set Up, Horizontal Distances, Calculate Reduced Levels, Long Chord Joining, Tangent Points

# Fill in the Blanks for the Abbriviations and Short Questions-Engineering Drawing and Graphics-Paper Solution

This exam was taken by Prof. Bahuleya Kittur at Alagappa University for Engineering Drawing and Graphics course. Latter on instructor gave us solution to paer, here it is with indication main points like Fill, Terminal, Examination, Solid, Objec...

# Rise and Fall Method - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Rise and Fall Method, Contours and Grid on Graph Paper, Level Booking, Longitudinal Section, Future Ground Levels, Direct Measurement, Tape Length, Basic Components of Theodolite, Two-Peg Test

# Two-Peg Test for Level - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Two-Peg Test for Level, Measuring Vertical Angle, Calculate Horizontal Distances, Plane of Collimation, Bench Mark, Automatic Level, Height of Collimation Method, Trapezoidal Rule

# Bowditch’s Method - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Bowditch’s Method, Open Traverse Survey, Accuracy of Traverse, Tacheometric Survey, Theodolite Set Up, Horizontal Distances, Calculate Reduced Levels, Long Chord Joining, Tangent Points

# Fill in the Blanks for the Abbriviations and Short Questions-Engineering Drawing and Graphics-Paper Solution

This exam was taken by Prof. Bahuleya Kittur at Alagappa University for Engineering Drawing and Graphics course. Latter on instructor gave us solution to paer, here it is with indication main points like Fill, Terminal, Examination, Solid, Objec...

# Height of Collimation Method - Engineering Practice - Old Exam Paper

Main points of this past exam paper are: Height of Collimation Method, Centreline of Road, Volume of Material, Construct Embankment, Plane of Collimation, Bench Mark, Automatic Level, Measuring Horizontal Angle

# Functions of a Foundation - Drawing and Design - Design - Past Exam Paper

Main points of this past exam are: Functions of a Foundation, Students, Correctly, Failure, Presented, Floppy Disk, Windows Explorer, Firstname, Summer, Generated

# Shaft Diameter - Drawing and Design - Design - Past Exam Paper

Main points of this past exam are: Shaft Diameter, Belt Pitch Length, Pulley Pitch Diameter, Belt Contact Angle, Belt Static Tension, Aid, Refrigeration, Refrigeration Plant, Required Number, Actual Compressor

# Strip Foundation - Drawing and Design - Design - Past Exam Paper

Main points of this past exam are: Strip Foundation, Name, Class, Subject, Disk Drive, Floppy Disk, My Computer, Windows Explorer, Generate, New Folder

# Appropriate Layers - Engineering Graphics - Exam

Main points of this past exam are: Appropriate Layers, Revolution, Mechanism, Locus, Paper Space, Template, Previously Created

# Cap Screw - Engineering Graphics - Exam

Main points of this past exam are: Cap Screw, Mechanism, Locus, Paper Space, Template, Previously Created, Revolution