Recent questions in Mechanical Engineering - Engineering

0

Answers

ELECTRICAL DISCHARGE MACHING

Hello, I machined the chromium-cobalt specimen by ELECTRICAL DISCHARGE MACHINING (EDM) at 1 Ampere current and pulse on time (20µs, 60 µs, 150 µs and200µs) with constant PULSE OFF TIME (20µs)...
16/09/2017

1

Answers

Factor of safety (angled bolt)

the material for the bolt in the angled joint has an ultimate tensile strength of 520 MPa and a shear strength of 315 MPa.the diameter of the bolt is 17mm.F = 15Angle = 73 degrees
27/04/2017