over 1 year ago

For the following process, draw the materials flow diagram, write the independent reactions, do the degree of freedom analysis and complete the materials and energy balances

5000 kg/hr of iron pyrite is roasted in 30% excess air to obtain Fe2O3 and SO2. Calculate the flame temperature of the flue gases.4FeS + 11O2 = 2Fe2O3 + 8SO2

ritwick-bhattacharjee

almost 3 years ago

Materials science

A hypothetical A–B alloy of composition 55 wt% B–45 wt% A at some temperature is found to consist of mass fractions of 0.5 for both α and β phases. If the composition of the β phase is 90 wt% B–10 wt% A, the composition of the α phase in wt% of B is

A hypothetical A–B alloy of composition 55 wt% B–45 wt% A at some temperature is found to consist of mass fractions of 0.5 for both α and β phases. If the composition of the β phase is 90 wt% B–10 wt% A, the composition of the α phase in wt% of B is _________

mark-lemuel-mariano

over 4 years ago

Materials science

What are the documents for multi phase transformation in metals?

About the phase transformations with diagrams and definitions

maxmr0

over 4 years ago

Materials science

Why are we given in the university common subjects that have nothing to do with the major ?

Why are we given in the university common subjects that have nothing to do with the major even though you may have determined your major since the foundation year and this material will not be useful to you ??

great-smart

almost 5 years ago

Materials science

Hollomon’s equation , Determine n

(1) A polycrystalline metal has a plastic stress--strain curve that obeys Hollomon’s equation, $"LaTeX: \sigma=K\varepsilon^n"$ σ = K ε nDetermine "LaTeX: n"

n, knowing that the flow stresses of this material at 2% and 10% plastic deformation (offset) are equal to 175 and 185 MPa, respectively.(2) You are traveling in an airplane. The engineer who designed it is, casually, on your side. He tells you that the wings were designed using the von Mises criterion. Would you feel safer if he had told you that the Tresca criterionhad been used? Why?

great-smart

almost 5 years ago

Materials science

gold. operate a Frank--Read source, compute the dislocation density

Consider dislocations blocked in gold. If the flow stress is controlled by the stress necessary to operate a Frank--Read source, compute the dislocation density $"LaTeX: \rho"$ ρ in the crystal when it is deformed to a point where the resolvedshear stress on the slip plane is 45 MPa. Take the shear modulus "LaTeX: G"

G = 27 GPa.

1 2

1-6 of 9

Recent questions in Materials science

What are the documents for multi phase transformation in metals?

Hollomon’s equation , Determine n

gold. operate a Frank--Read source, compute the dislocation density

cold working of metals

how type questions asked by teachers

For the following process, draw the materials flow diagram, write the independent reactions, do the degree of freedom analysis and complete the materials and energy balances

A hypothetical A–B alloy of composition 55 wt% B–45 wt% A at some temperature is found to consist of mass fractions of 0.5 for both α and β phases. If the composition of the β phase is 90 wt% B–10 wt% A, the composition of the α phase in wt% of B is

What are the documents for multi phase transformation in metals?

Why are we given in the university common subjects that have nothing to do with the major ?

Hollomon’s equation , Determine n

gold. operate a Frank--Read source, compute the dislocation density

For the following process, draw the materials flow diagram, write the independent reactions, do the degree of freedom analysis and complete the materials and energy balances

cold working of metals

Why are we given in the university common subjects that have nothing to do with the major ?

how type questions asked by teachers

What are the documents for multi phase transformation in metals?

gold. operate a Frank--Read source, compute the dislocation density