A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elabor, Exams of Nursing

Download A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elabor and more Exams Nursing in PDF only on Docsity! A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. You work at a computer repair store. A customer purchased and installed the latest AMD Phenom II processor in their computer. However, now the computer will not start. You need to repair the customer's computer. In this lab, your task is to: > Verify the problem. Possible problems include: ~ The heat sink and fan are not installed. ~ The fan power connector is not connected to the motherboard. ~ The CPU is not supported by the BIOS. ~ The CPU is bad. > Diagnose and correct the problem. - Exact Answer Verify the problem. > Select the power button to start the computer. > The computer fails to start. > Select OK to close the message. Examine the details of the CPU. > Above the computer, select Motherboard to switch to the motherboard view of the computer. > Select the motherboard. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > From the Selected Component pane, identify the socket type for the motherboard. > From the Selected Component pane, select Details. > Select the Specifications tab. > Read the motherboard documentation to identify additional requirements for the CPU. > Identify the location of the CPU fan connector. > Close the Motherboard Details window. Verify that all CPU power cables are connected. > Select the Heat Sink and Fan. > From the Selected Component pane, verify that the Connector, Fan, CPU 4-pin power connector is connected to the motherboard. > Because everything is connected properly, you will need to replace the CPU. > Install a new CPU. > Drag the Heat Sink and Fan to the Workspace. > Drag the CPU that's currently installed on the motherboard to the Shelf to remove it from the computer. > From the Shelf, drag the new CPU, AMD AM3 to the CPU socket on the motherboard. > From the Workspace, drag the Heat Sink and Fan to the motherboard. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. Provide power to the printer. > Under Shelf, select Power Adapter for HP. > From the Selected Component pane: ~ Drag the Power Adapter, DC connector to the port on the back of the printer. ~ Drag the Power Adapter, AC connector to an AC power port on the wall outlet or power strip. Verify the installation and set the printer as the default printer. > On the monitor, select Click to view Windows 11. > Right-click Start and then select Settings. > Select Bluetooth & devices. > From the right pane, select Printers & scanners. > Your newly installed printer is shown. > Under Printer preferences, for Let Windows manage my default printer, slide the button to Off. > Select HP Photosmart Plus. > Select Set as default. Add a comment to the ticket and close the ticket. > From the upper left, select Floor 1 Overview. > Under IT Administration, select ITAdmin. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > In the New Comment field, for the open ticket, add a comment to indicate that the printer has been installed. > Select the + (plus sign) to add the comment. > From the top of the ticket: ~ Select Closed. ~ Select the left arrow. > There are no more tickets to be processed. > Close Issue Trax. You are the IT administrator for a small corporate network. The area around your office complex is under construction. The power company informed you that there may be short interruptions to the electrical service that could last up to 15 minutes. You need to add a UPS to the workstation and monitor in Office 1 so that work can be saved in the event of an outage. A UPS protects against over- and under-voltage conditions. The battery included with the UPS provides backup power in case the main power is lost. In this lab, your task is to: > Add a UPS to your computer: A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Plug the UPS into the wall outlet and turn it on. > Plug the computer and monitor power cables into the appropriate UPS outlets. > Plug the printer in to the appropriate UPS outlets. > Connect the network cables through the UPS to the computer. The cable from the wall connects to the IN port. > Connect the USB cable to the UPS and the computer. > Power on the monitor and then the computer. > Unplug the UPS from the wall outlet. Do the computer and monitor still have power? - Exact Answer Add a UPS to the Workspace, plug it in, and power it on. > Under Shelf, expand Outlets. > Drag the UPS to the Workspace. > From the Selected Component pane, drag the power plug to a power outlet on the wall plate. > Click the power button on the UPS to turn it on. Plug the computer and monitor in to the appropriate power outlets. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > From the Office 1 monitor, select Click to view Windows 11. > Because the computer is being powered by the UPS, the computer is still on. You are the IT administrator for a small corporate network. You need to configure additional security in the BIOS for the computer in Office 1. In this lab, your task is to: > Restart the computer in the BIOS. ~ Press F2 while the computer is booting. Configure the following security settings: > Add an admin password used to make changes to BIOS settings. ~ Password: t67xab1 > Add a password that prevents hard disk access even when the hard disk is moved to another system. ~ Password: dog8b0b (0 is a zero) > Enable the TPM. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Enable chassis intrusion detection to show an alert during POST when an intrusion is detected. ~ Save your changes. > Restart the computer to verify the changes you have made. At the bottom of the BIOS window, select Send Ctrl + Alt + Del to restart the computer if necessary. - Exact Answer Set the admin password. > From the taskbar, select Start. > The Start window is shown. > From the bottom right of the Start window, select the power icon. > Select Restart. > When you see the TestOut logo, press F2 (or Delete) to access the BIOS settings. > From the left pane, expand Security. > Select Admin Password to set the admin password. > Type t67xab1 in the Enter new password field. > Type t67xab1 in the Confirm new password field. > Select OK. Set the hard disk password. > From the left pane, under Security, select Internal HDD-1 Password to configure a hard drive password. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Type dog8b0b in the Enter new password field. (0 is a zero.) > Type dog8b0b In the Confirm new password field. (0 is a zero.) > Select OK. > Read the warning message on the screen and then select Yes. Enable TPM.From the left pane, under Security, select TPM Security.From the right pane, select TPM Security.Select Apply.Select Activate.Select Apply. Enable intrusion detection. > From the left pane, under Security, select Chassis Intrusion. > Select Enable. > Select Apply. > Select Exit to exit and save your changes. > The system automatically reboots. Verify the changes made. > Press F2 (or Delete) during the BIOS load to test the admin password. If you do not press the Delete key in time, select the Send Ctrl + Alt + Del button at the bottom of the screen. > Enter t67xab1 when you are prompted for the administrative password. > Select OK. > Notice that the admin password was set correctly. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Select the cable used to connect SATA devices. > From the Selected Component pane, drag a SATA connector to the hard drive. > Under Shelf, select a second cable used to connect SATA devices. > From the Selected Component pane, drag a SATA connector to the second hard drive. Attach the SATA cables to the motherboard. > Above the computer, select Motherboard to switch to the motherboard view. > From the Selected Component pane, drag the unconnected SATA connector to a SATA port on the motherboard. > At the top, under Partial Connections, select the SATA cable. > From the Selected Component pane, drag the unconnected SATA connector to a SATA port on the motherboard. Connect power to both hard drives. > Above the computer, select Drive Bays to switch to the drive bay view. > At the top, under Partial Connections, select the power supply. > From the Selected Component pane: ~ Drag a SATA power connector to one of the hard drives. ~ Drag a SATA power connector to the second hard drive. Install the eSATA port connector. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Above the computer, select Motherboard to switch to the motherboard view. > Under Shelf, expand Port Connectors. > Drag the eSATA Port Connector to a free PCI or PCIe slot. > From the Selected Component pane, drag the SATA connector to a free SATA port on the motherboard. Power on the monitor and computer and verify that the hard drives have been recognized in the BIOS. > Above the computer, select Front to switch to the front view of the computer. > On the monitor, click the power button. > On the computer, click the power button. > As the system starts, press the F2 (or the Delete) key to enter the BIOS setup program. > Verify that the hard drives were detected. You are the IT administrator for a small corporate network. Some of your workstations are having issues, and you need to correct them with a firmware update. In this lab, your task is to: > Restart the computer and enter the BIOS. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Exact Answer Question 1. > Use the C:\BIOS_Updater.exe program to update the BIOS. > Restart the computer and enter the BIOS. > Exact Answer Question 2. - Exact Answer Check the current BIOS version. > Right-click Start and then select Shut down or sign out > Restart. > As the computer restarts, press F2 (or Delete) to enter the BIOS. > View the System Information page. > From the top right, select Exact Answer Questions. > Exact Answer Question 1. ~ 1. What is the BIOS version before the update? > Minimize the Lab Questions dialog. > Select Exit to boot the computer to the Windows OS. Update the BIOS firmware. > From the taskbar, select File Explorer. > Maximize the window for better viewing. > From the left pane, expand and select This PC A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > In the New Comment field, enter the following comment: Melanie, I installed Audacity on your system last night. > Select the + (plus sign) to add the comment. > From the top of the ticket: ~ Select Closed. ~ Select the left arrow. Verify that the ticket is closed. > From the left pane, select Closed. > Verify that #12 Need Audacity installed is shown. You are the IT administrator for a small corporate network. You have just changed the SATA hard disk in the workstation in the Executive Office. You need to edit the boot order to make it consistent with office standards. In this lab, your task is to: > Access the computer's BIOS settings. > Disable booting from the diskette drive. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Configure the remaining devices to boot using the following boot order: ~ Internal HDDCD/DVD/CD-RW drive ~ Onboard NIC ~ USB storage device - Exact Answer Access the BIOS settings. > Select the power button on the computer. > As the computer begins to boot, press the Delete (or F2) key to enter the computer's BIOS settings. Disable booting from the diskette drive. > From the left pane, under General, select Boot Sequence. > Under Boot Sequence, unmark Diskette Drive to disable the ability to boot from the diskette. Change the boot sequence order of the remaining active devices. > From the right, select a device field that needs to be moved to a different boot order location. > Move the selected device up or down using the arrows to the right of the device list. > Repeat steps 3a-3b to modify additional device priorities as required. > Select Apply and then select Exit. > The computer automatically boots to Windows. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. You have installed Hyper-V on ITAdmin. You want to create two new virtual machines (VMs) on which you will later install Windows 11. These new VMs will be used for testing. In this lab, your task is to: > Create a new virtual machine named VM1 using the following parameters: ~ Virtual machine name: VM1 ~ Virtual machine location: D:\HYPERV ~ Generation: Generation 1 ~ Startup memory: 1024 MB (do not use dynamic memory) ~ Networking connection: External ~ Virtual hard disk name: VM1.vhdx ~ Virtual hard disk location: D:\HYPERV\Virtual Hard Disks ~ Virtual hard disk size: 50 GB ~ Operating system will be installed later. > Create a new virtual machine named VM2 using the following parameters: ~ Virtual machine name: VM2 ~ Virtual machine location: D:\HYPERV ~ Generation: Generation 1 ~ Startup memory: 2048 MB (use dynamic memory) A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > In the Startup memory field, enter 2048 MB of memory to use with the virtual machine. > Mark Use Dynamic Memory for this virtual machine and then select Next. > For Connection, use the drop-down menu to select Internal and then select Next. > Make sure Create a virtual hard disk is selected. > In the Name field, make sure VM2.vhdx is entered. > In the Location field, make sure D:\HYPERV\Virtual Hard Disks is entered. > For the Size field, use 250 GB and then select Next. > Make sure that Install an operating system later is selected and then select Next. > Select Finish to create the virtual machine. Configure the minimum and maximum RAM values for VM2. > Under Virtual Machines, right-click VM2 > Select Settings. To adjust the Virtual Machines memory. > From the left pane, select Memory. > For the Minimum RAM field, use 512 MB. > For the Maximum RAM field, use 4096 MB and then select OK. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. In this lab, you will use some system commands to explore the file system. Your task is to complete the following from Windows PowerShell. In Windows 11 PowerShell is also referred to as the "Windows Terminal". > Copy a file to a new folder. ~ Create a new folder in the E: drive named Graphics. ~ Copy D:\Graphics\cat.jpg to the E:\Graphics folder. > Use nslookup to query the DNS for the CorpServer server using its full name (CorpServer.CorpNet.local). ~ Exact Answer Question 1. > Use chkdsk to check the file system on the D: Data volume. ~ Exact Answer Question 2. > Use gpupdate to apply the latest Group Policy changes to your workstation. ~ Use gpresult /r to see which policies are applied to the workstation. ~ Exact Answer Question 3. > Use Task Manager to identify the process ID (PID) for the Language Application; then use taskkill to stop that process. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Use net use to map the P: drive to the Personnel shared folder on CorpFiles. ~ Change to the P: drive to look at the folders on the drive. ~ Exact Answer Question 4. - Exact Answer Create a new folder and copy a file into that folder. > Right-click Start and select Windows Terminal (Admin) to open Windows PowerShell. > At the PowerShell prompt, type E: and press Enter. > Type dir or ls; then press Enter to view the folders. > Notice that there are no folders or files on the drive. > Type md Graphics and press Enter to create the Graphics folder. > Type cd Graphics and press Enter to move to the Graphics folder. > Type D: and press Enter to change to the D: drive. > Type dir or ls; then press Enter to view the folders. > Type cd Graphics and press Enter to move to the Graphics folder on the D: drive. > Type copy cat.jpg E: and press Enter to copy the file from the D: drive to the E:\ Graphics folder. > Type E: and press Enter to change back to the E: drive. > Type dir and press Enter. > Notice that the cat.jpg file was copied. Find the IP address of CorpServer. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Jed needs normal access to start the computer, run applications, and save files. All users automatically become members of the Users group when you create the user accounts. In this lab, your task is to create user accounts and add them to groups as follows: User Account > Sylvia Account Settings > Assign an initial password of 0Clever1 (0 is a zero). > Force the user to change the password at next logon. > Add to the applicable group. User Account > Scott Account Settings > Assign an initial password of 0Clever1 (0 is a zero). > Force the user to change the password at next logon. > Add to the applicable group. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. User Account > Jed Account Settings > Assign an initial password of 0Clever1 (0 is a zero). > Force the user to change the password at next logon. - Exact Answer From Office1, create the user accounts for Scott, Sylvia, and Jed. > Right-click Start and select Computer Management. > Maximize the window for better viewing. > Expand Local Users and Groups. > Right-click Users and select New User. > In the User Name field, enter the username. > In the Password field, enter 0Clever1 (0 is a zero). > In the Confirm password field, enter 0Clever1 (0 is a zero). > Make sure User must change password at next logon is selected. > Select Create. > Repeat steps 1d - 1h to create the additional user accounts. > Select Close. Add the new user to their applicable group. > From the left pane, select Groups. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > In the center pane, right-click the group and then select Add to Group. > Select Add. > Under Enter the object names to select, enter the username to be added to the group; then select OK. > Select OK. > Repeat steps 2b - 2e to assign additional users to other groups. You are the IT administrator for a small corporate network. You are attempting to improve the password security of the Windows laptop located in the Lobby. In each policy, the Explain tab provides a description of the policy's effects to help you identify the policies and values to configure. In this lab, your task is to use the Local Security Policy tool to configure password restrictions as follows: > Password policies: ~ New passwords cannot be the same as the previous 4 passwords. ~ Passwords must be changed every 30 days. ~ New passwords cannot be changed for at least 2 days. ~ Passwords must be at least 10 characters long. ~ Passwords must contain non-alphabetical characters. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. ~ Exact Answer Question 3 > Examine the Heat Sink and Fan component details. > Correct any issues you find that would be causing the computer to shut down. - Exact Answer Verify the problem. > Select the power button to start the computer. > After Windows loads, you will see the computer automatically shut down. > Select OK to close the message. > From the top right, select Exact Answer Questions. > Exact Answer Question 1. ~ Q1: Can the computer boot to Windows if there is no CPU installed Examine the CPU details. > Above the computer, select Motherboard. > Select the motherboard. > From the Selected Component pane, select Details. > Select the Specifications tab. > Maximize the window for better viewing. > Read the motherboard documentation to identify the locations for the CPU fan connector. > From the top right, select Exact Answer Questions. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Exact Answer Question 2. ~ Q2: Which number on the motherboard diagram indicates where the CPU fan can be connected? > Close the motherboard specifications window. Examine the Heat Sink and Fan component details. > On the Workspace, under Partial Connections, select the Heat Sink and Fan. > From the Selected Component pane, select Details. > Select Bottom to view the bottom of the heat sink and fan. > Exact Answer Question 3. ~ Q3: Why is thermal paste not needed in this case? > Close the Heat Sink and Fan Details window. > Minimize the Question window. Provide power to the Heat Sink and Fan. > From the Selected Component pane, notice that the Connector, Fan, CPU 4-pin cable is not connected. > Drag the Connector, Fan, CPU 4-pin cable to the correct location on the motherboard. > You may need to zoom in on the motherboard to see which fan port is designated for the CPU. > Above the computer, select Front. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Select the power button to start the computer. > After Windows loads, verify that the system works without crashing. In this lab, the motherboard has a CPU overheating protection feature. The motherboard shuts off the computer when the CPU temperature reaches a high level. You are the IT administrator for a small corporate network. You have recently experienced some problems with devices on the Office2 computer. For example, the new Broadcom network card you installed isn't working as expected (the speed is only 1 Mbps). Until you can figure out what the problem is, you have decided to use the Realtek network card instead. In addition, you have recently updated the driver for your video card. However, the system experiences periodic crashes that you suspect are caused by the new driver. In this lab, your task is to: > Disable the Broadcom network adapter. > Enable and update the Realtek network adapter. > Roll back the video card driver. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Local Disk (D:). > Right-click the Graphics folder and then select Properties. > From the General tab, select Advanced. > Select Compress contents to save disk space and then select OK. > Select OK to close the Graphics Properties dialog. The Confirm Attribute Changes dialog is shown. > Make sure Apply changes to this folder, subfolders and files is selected and then select OK. From the D:\Tools folder, configure the Audacity-64bit.exe and the Snagit.exe programs to have the Read-only attribute. > Double-click Tools to view this folder's contents. > Right-click [file_name].exe and then select Properties. > Select Read-only and then select OK > Repeat steps 2b - 2c to configure attributes for the second file. Hide the D:\Finances folder. > From the left pane, expand and select This PC > Local Disk (D:).> Right-click Finances and then select Properties. > For Attributes, select Hidden and then select OK. > Make sure Apply changes to this folder, subfolders and files is selected and then select OK. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. You share a computer with other users at work. You want to secure the contents of the Finances folder so that unauthorized users cannot view its contents. In this lab, your task is to: > Encrypt the D:\Finances folder and all of its contents. > Give John file access to the encrypted D:\Finances\2022report.xls file by adding the encryption certificate. - Exact Answer Open the D:\ drive. > From the Windows taskbar, select File Explorer. > From the left pane, select This PC. > From the right pane, double-click Local Disk (D:). Encrypt the Finances folder. > Right-click Finances and then select Properties. > Select Advanced. > Select Encrypt contents to secure data and then select OK. > Select OK to close the properties dialog. > Select OK to confirm the attribute changes. Give John authorization to modify the encrypted 2022report.xls file. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Double-click Finances. > Right-click 2022report.xls and then select Properties. > Select Advanced. > Select Details. > Select Add. > Select John and then select OK. > Select OK as many times as needed to close all remaining dialogs. You are the IT administrator for a small corporate network. An employee has just called you saying that when they turn their laptop computer on, it comes up with a funny screen that they don't recognized. In this lab, your task is to: > Boot the Exec-Laptop computer and evaluate the system. > Exact Answer Question 1. ~ > Determine which option would most likely fix the issue and run that option. - Exact Answer Boot the Exec-Laptop computer and evaluate the system. > Above the Exec-Laptop, select Top to view the power button. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > Select OK. You are one of the IT administrators for a corporate network. Your manager (Melanie) has been working on a help desk ticket that was created by the marketing manager (Elijah). Your manager has now asked you to complete the remaining requirements for this ticket. In this lab, your task is to: > Open Issue Trax and the open ticket. > Assign the ticket to yourself (Me). > Resolve the remaining issues using the information found in the open ticket. > Add a comment to the ticket indicating that it has been resolved. > Close the ticket. - Exact Answer From ITAdmin, review the help desk ticket. > From the taskbar, select Issue Trax. > Maximize the window for better viewing. > Select ticket #11. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. Using the Assignee dropdown list, assign the ticket to Me (yourself). > From the open ticket, determine the remaining tasks that need to be completed. > Leave the ticket maximized so you can see the details. Configure the integrated NIC for PXE boot. > From the top left, select Floor 1. > Under Building A, select Floor 2. > Under Marketing Group C, select Hardware. > On the computer, select the power button and, while the computer is starting, press F2 to enter the Setup Utility. > Expand System Configuration. > Select Integrated NIC. > Select Enabled w/PXE. > Select Apply. > From the left pane, under General, select Boot Sequence. > Make sure that Onboard NIC has a check mark. > Select Exit. Boot the computer and install the Window 10 image. > From the Windows Boot Manager, press Enter to select the Windows 10 (x64) image. A.3 TestOut PC Pro Certification Practice Exam Questions with 100% Correct Detailed Elaborated Procedures. > View the image being downloaded. > After the image is downloaded, verify that the computer boots to Windows 10. Add a comment to the ticket and close the ticket. > From the top left, select Floor 2. > Under Building A, select Floor 1. > Under IT Administration, select ITAdmin. > In the New Comment field of the open ticket, enter a comment of your choice to indicate that the OS has been installed. > Select + (the plus sign) to add the comment. > From the top of the ticket, select Closed. > Close Issue Trax.