AAMC MCAT Practice Exam 1 Questions & Answers with Complete and Verified Answers 2023-2024, Exams of Nursing

Download AAMC MCAT Practice Exam 1 Questions & Answers with Complete and Verified Answers 2023-2024 and more Exams Nursing in PDF only on Docsity!

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

In the chromatography of the reaction mixture, water absorbed on cellulose functioned as the stationary phase. What was the principal factor determining the migration of individual components in the sample? A) Hydrogen bonding B) Solute concentration C) Stationary phase concentration D) Thickness of paper - A) Hydrogen bonding The Answer to this question is A because the relative amount of hydrogen bonding to the stationary phase will determine the relative rate of migration of the various components in the sample.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

What assumption is being made if scientists conclude that aspartic acid was formed by the prebiological synthesis in the passage? A) Aspartic acid is unstable at temperatures below 150 degrees C. B) All of the malic acid underwent the dehydration reaction to form fumaric/maleic acid. C) Compound A and cyanide were available on primitive Earth. D) The reaction between ammonia and fumaric acid was catalyzed by the presence of water. - C) Compound A and cyanide were available on primitive Earth. he Answer to this question is C since, in order for the experimental reaction sequence to be relevant to the primordial formation of aspartic acid, the starting materials used (Compound A and cyanide) are assumed to have been available.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

According to the developed chromatography plate shown below, what is the approximate Rf value of aspartic acid? aspartic acid = 2 solvent front = 10 A) 0. B) 0. C) 5 D) 10 - The Answer to this question is A (0.20) because Rf is the ratio of the distance travelled by the analyte relative to the solvent front during a chromatographic separation. Aspartic acid travelled two units, while

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

the solvent front travelled ten units, giving an Rf of 2/10 = 0.20 for aspartic acid. Which of the following statements does NOT correctly describe the dehydration of malic acid to fumaric acid and maleic acid? A) The reaction occurs most readily with tertiary alcohols. B) The reaction involves the loss of a water molecule. C) The reaction has a carbocation intermediate. D) The reaction is stereospecific. - D) The reaction is stereospecific. The Answer to this question is D because the fact that both fumaric and maleic acid are produced means that the dehydration of malic acid is NOT stereospecific.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

What type of functional group is formed when aspartic acid reacts with another amino acid to form a peptide bond? A) An amine group B) An aldehyde group C) An amide group D) A carboxyl group - C) An amide group The Answer to this question is C because the functional group that forms during peptide bond formation is known as an amide group. If 2-pentanol replaces 1-pentanol in the reaction shown in Figure 3 (SN2), the rate of substitution is less because:

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

A) the C-O bond in 2-pentanol is stronger than the C-O bond in 1- pentanol. B) there is a competing elimination reaction that slows the rate of substitution. C) there is more steric hindrance at the oxygen atom in 2-pentanol than in 1-pentanol, making protonation less likely. D) there is more steric hindrance at the 2-position of 2-pentanol than at the 1-position of 1-pentanol. - D) there is more steric hindrance at the 2-position of 2-pentanol than at the 1-position of 1-pentanol. The Answer to this question is D because the rate of substitution of protonated alcohols is subject to steric hindrance. This inhibits the ability of nucleophiles to collide with the reacting electrophilic center and slows the rate of reaction.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

If a solution containing the compounds shown in Figure 4, is injected into a gas-liquid chromatograph, the first peak observed in the gc trace is attributable to which compound? A) Methyl-2-butanol B) Methyl-2-butene C) Chloro-2-methylbutane D) Bromo-2-mehtylbutane - B) Methyl-2-butene The Answer to this question is B because 2-methyl-2-butene will exhibit the lowest molecular weight and also the weakest intermolecular forces of attraction. This substance will therefore migrate the fastest and be the first peak in the gas chromatograph (gc) trace. R vs. S stereochemistry* - R = clockwise

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

C = counter-clockwise Acetic acid and ethanol react to form an ester product as shown below. In determining which reactant loses the -OH group, which of the following isotopic substitutions would be most useful? A) Replace the acidic H of acetic acid with D B) Replace the alcoholic H of ethanol with D. C) Replace the carbonyl oxygen of acetic acid with O-18. D) Replace the hydroxyl oxygen of ethanol with O-18. - D) Replace the hydroxyl oxygen of ethanol with O-18.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is D because this experiment involves labeling a group which does not exchange with other groups present prior to reaction and will therefore give information about the true identity of the groups, which are exchanged during the reaction. A person whose eye has a lens-to-retina distance of 2.0 cm, can only clearly see objects that are closer than 1.0 m away. What is the strength S of the person's eye lens? (Note: Use the thin lens formula 1/O + 1/I = S) A) -50 D B) -10 D C) 51 D D) 55 D - C) 51 D

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is C because the strength of the eye lens is equal to the inverse of the focal length of the eye lens. Its numerical value is given by (1 m)-1+(0.02 m)-1=1 D+50 D=51 D. Which statement correctly describes how enzymes affect chemical reactions? Stabilization of: A) the substrate changes the free energy of the reaction. B) the transition state changes the free energy of the reaction. C) the substrate changes the activation energy of the reaction. D) the transition state changes the activation energy of the reaction. - D) the transition state changes the activation energy of the reaction.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer is D because the stabilization of the transition state, not the substrate, provides binding energy that is used to lower the activation energy. Which of the following will decrease the percentage ionization of 1.0 M acetic acid, CH3CO2H(aq)?* A) Chlorinating the CH3 group B) Diluting the solution C) Adding concentrated HCl (aq) D) Adding a drop of basic indicator - C) Adding concentrated HCl (aq)

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is C because HCl is a strong acid that will increase the amount of H+ in solution and thus decrease the percentage of CH3CO2H that ionizes. When the current in the micro-robot's circuit increases and the resistance of the circuit remains constant, the voltage of the circuit: A) decreases B) increases C) is constant D) is zero - B) increases V = IR

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is B because according to Ohm's law, current is equal to voltage divided by resistance. If current increases and resistance is constant, then voltage increases as well. Knowing that the speed of light in the vitreous humor is 2.1 × 108 m/s, what is the index of refraction of the vitreous humor? (Note: The speed of light in a vacuum is 3.0 × 108 m/s.) A) 0. B) 1. C) 2. D) 3.0 - B) 1. n = c/v

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is B because the index of refraction of a medium is equal to the ratio of the speed of light in vacuum to the speed of light in the medium, thus it is equal to (3.0 x 108 m/s)/(2.1 x 108 m/s) = 1.4. The intensity of the radiation emitted by the oxygen sensor is directly proportional to the: A) propagation speed of the radiation B) wavelength of the radiation C) polarization of photons emitted D) number of photons emitted - D) number of photons emitted

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is D because the energy of electromagnetic radiation is directly proportional to the number of photons, and the intensity of electromagnetic radiation is defined as energy emitted per unit time. Thus, intensity is directly proportional to the number of photons emitted. What is the energy of the photons emitted by the LED at a frequency of 610 THz? (Note: h = 6.6 × 10-34 J·s) A) 9.2 × 10-12 J B) 1.6 × 10-16 J C) 1.1 × 10-18 J D) 4.0 × 10-19 J - D) 4.0 × 10-19 J

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

The Answer to this question is D because the energy of a photon of frequency 610 THz is equal to 6.6 x 10-34 J•s x 610 x 1012 Hz = 4 x 10- 19 J. What percentage of standard atmospheric pressure is the pulse pressure of a healthy adult? The maximum and minimum blood pressures of a healthy adult are about Ps = 120 mmHg and Pd = 75 mmHg. Pp = Ps-Pd A) 10% B) 6%

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

C) 2%

D) 1% - B) 6%

The Answer to this question is B because the pulse pressure in a healthy adult is (120 − 75) mmHg = 45 mmHg, and so the percentage is 45 mmHg/760 mmHg = 6%. What fraction of a O-15 sample decays in 10 min? "The location of internal organs where changes in the calcium content occur can be found by placing positron-emitting isotopes such as O- (with a half-life = 2 min) into the patient's bloodstream) A) 1/

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

B) 9/

C) 3/

D) 31/32 - D) 31/

The Answer to this question is D because the half-life of 15O is 2 minutes; thus, 10 minutes = 5 half-lives. Therefore, only (1/2)5 = 1/32 of the sample will be left after 10 minutes, while 31/32 of the sample will decay. Compared to micellular Compound 1, Compound 2 is structurally more rigid as a result of what type of interaction? A) Intermolecular hydrogen bonding B) Intermolecular covalent bonding

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

C) Intramolecular hydrogen bonding D) Intramolecular covalent bonding - B) Intermolecular covalent bonding The Answer to this question is B. It can be reasoned that the interaction described is intermolecular in nature, since multiple molecules of micellular Compound 1 come together to form Compound 2, which is a solid. Multiple pieces of information point to the fact that the interaction is disulfide bond formation, including the fact that an oxidant causes the formation of Compound 2, which can be reversed by the addition of a reducing agent. Which amino acid residues were incorporated into Compound 1 to promote the adhesion of cells on the scaffold surfaces? A) Arg and Gly

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

B) Cys and Gly C) Cys and Asp D) Asp and Arg - D) Asp and Arg The Answer to this question is D. The residues that were engineered into the peptide for cell adhesion are arginine and aspartate as can be reasoned based on the structure of the peptide provided, and the description of the roles of the various residues provided in the passage. Which amino acid was incorporated into Compound 1 as a future site of covalent attachment to HA prior to mineralization? A) Ser B) Ala C) Tyr

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

D) Thr - A) Ser The Answer to this question is A because serine is the residue that was phosphorylated, and phosphorylation enabled the protein to be subsequently attached to hydroxyapatite (HA). Compound 1 was designed to exhibit pH-dependent self-assembly. What feature(s) of the molecule is(are) responsible for the pH dependence of aggregation (Equation 1)? A) Thiol side chains that can hydrogen bond B) Long alkyl chains that exhibit predominantly London forces C) Side chains whose net charge responds to pH

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

D) Covalent linkages that reversibly hydrolyze - C) Side chains whose net charge responds to pH The Answer to this question is C because the molecule contains mainly acidic side chains that were deprotonated and negatively charged at high pH. This inhibited aggregation due to electrostatic principles. At low pH these groups are neutral and this allowed aggregation. Why is the velocity of blood flow slower in capillaries than in arteries? A) Capillary walls are more elastic than arterial walls. B) Capillaries have less resistance to blood flow than arteries. C) The total cross-sectional area of capillaries exceeds that of arteries.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

D) Blood pressure is higher in the capillaries than in arteries. - C) The total cross-sectional area of capillaries exceeds that of arteries. A1v1 = A2v2 The Answer to this question is C because the high number of capillaries in the body means that the total cross-sectional area of these vessels is larger than any other vessel type in the circulatory system. This causes the velocity of the blood to decrease. Which of the following types of orbitals of the central atom is involved in bonding in octahedral compounds? A) sp B) sp3

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

C) p D) d2 sp3 - D) d2 sp3 The Answer to this question is D because octahedral compounds have six σ bonds and no lone pairs. According to valence bond theory, the central atom requires the hybridization of six atomic orbitals, d2sp3. The term "ideal gas" refers to a gas for which certain assumptions have been made. Which of the following is such an assumption? A) The law PV = nRT^2 is strictly obeyed. B) Intermolecular forces are infinitely large. C) Individual molecular volume and intermolecular forces are negligible.

Questions & Answers with

Complete and Verified

Answers 2023-2024 Update.

D) One gram-mole occupies a volume of 22.4 L at 25 degrees C and one atmosphere pressure. - C) Individual molecular volume and intermolecular forces are negligible. The Answer to this question is C since a property of an "ideal" gas is that it is composed of particles that have negligible volume and do not exert intermolecular forces. The production of a variety of opsins functions to: "Additional opsin based receptors are expressed in specialized cone cells" A) increase sensitivity to low light