AMMO Risk Management and Preparation of SOP, Exams of Military Strategy and Training

Download AMMO Risk Management and Preparation of SOP and more Exams Military Strategy and Training in PDF only on Docsity!

AMMO Risk Management and preparation of SOP

QUESTIONS WITH COMPLETE VERIFIED

SOLUTIONS 2024/

Which type of risk endangers lives or resources without contributing to mission accomploishment? An unnecessary risk Which Army publication provides specific information to implement RM policies and procedures? DA PAM 385- 30 In which phase of the RM process is the hazard control plan developed and put into action? Management phase In the assessment phase, RM practitioners identify hazards and Assess hazards what is a condition with the potential to cause a harmful event such as injury, illness, or loss of equipment of property? Hazard In this hazard scenario, what is the outcome? Stored blasting materials + Exposure to heat = Detonation or explosion Detonation or explosion Why does the RM practitioner estimate the probability and level of severity for each hazard in step 2 of the RM process? To assign a level of risk to each hazard. Which term describes the extent of expected harm from an event, in terms of amount of injury, property damage, or other mission-impairing effect? Severity Per ATP 5-19, Table 1-1, what is the probability for a harmful occurrence expected to happen infrequently (remotely possible, could occur at some time)? Unlikely (NOT THE ANSWER) Per ATP 5-19, Table 1-1, what is the severity of a hazard if its expected consequences include complete mission failure or unacceptable collateral damage? Severity is estimated as >CATASTROPHIC< when consequences of an event, if it occurs, are expected to include death, unacceptable loss or damage, mission failure, or the loss of unit readiness.

Per ATP 5-19, Table 1-1, what is the risk level for a hazard with likely probability and negligible severity Low Which information is NOT part of a hazard control action plan? Negotiations When supervising action plans, which action is NOT something supervisors do to ensure awareness, training, and compliance? Delegate supervisor duties Which is NOT a goal of evaluation feedback? Ensure hazard controls are not revised once they are implemented The Army requires SOPs for complex tasks, those involving hazardous materials, and All operations involving A&E What is the purpose of an SOP? To provide clear, concise guidance to operation personnel and aid in the training of operators. Several publications may be referenced when developing SOPs including DA PAM 700-107, ATP 3-90.90, and The SOP portal What is the last step in the sop development process? Review SOP When developing an SOP, the first step is to Determine the SOP objective. When writing an SOP, which step requires you to explain each operating procedure in detail including how to carry it out? Write detailed operating instructions Select the correct sequence of steps used for SOP review and concurrence. Assemble SOP, review SOP, preform pilot run. Who must approve the SOP locally before the installation commander approves it? Concurring agencies What is the most important aspect to successful implementation of controls? Communication (NOT THE ANSWER) All active SOPs (except demilitarization and disposal, toxic chemicals, AMC A&E, and hazardous operations) must be reviewed Annually, biennially (NOT THE ANSWER) Which statement does NOT describe the purpose of an SOP? To allow personnel to create and implement new operational procedures on the fly. Which element is NOT an essential SOP requirement? Risk management matrix

Which hazard control is implemented through the wearing of hard hats, safety glasses, and respirators? PPE In which phase of the RM process does research take place? Management phase (NOT THE ANSWER) Who is the official approver for SOPs? Installation commander. When writing an SOP, which step requires you to graphically map out the workflow, identifying each workstation and locations of major equipment items within a facility? Perform pilot run (NOT THE ANSWER) Which resource is NOT used to conduct SOP research? Technical publications (NOT THE ANSWER) When assessing hazards to create an SOP, the RM practitioner determines the SOP objective, conducts research, and Conducts a hazard analysis What is the last step in the SOP development process? Review SOP After the hazard control action plan is approved, leaders put control measures in place and Evaluate effectiveness of the controls Which factor is NOT a consideration when making risk decisions? Benefits and costs (NOT THE ANSWER) Which hazard control is implemented by installing a custom vapor evacuation system in a paint booth to reduce the inhalation hazard from paint fumes? Engineering Which factor is NOT a consideration when making risk decisions? Certification Per ATP 5-19, Table 1-1, what is the risk level for a hazard with likely probability and negligible severity? Low Why does the RM practitioner estimate the probability and level of severity for each hazard in Step 2 of the RM process? To assign a level of risk to each hazard What is the process of identifying, assessing, and mitigating associated risks, and making decisions that balance risk costs with mission benefits called? Risk management Which hazard control is implemented through individual and collective training to create awareness?

Administrative Which hazard assessment tool helps break a task or activity down to its smallest actions to allow the evaluator to identify each hazard independently? Job hazard analysis To focus on the hazards directly related to the event, the assessor must Define limits Which action is completed during Step 5 of the RM process? Follow up to ensure the hazard controls are in place and working To identify hazards, RM practitioners use pre-existing hazard data including regulations and manuals, mishap reports, training assessments and After action reviews What is the purpose of assessing the hazards identified in Step 1 of the RM process? To determine the probability of each hazard (NOT THE ANSWER) Per ATP 5-19, Table 1-1, what is the probability for a harmful occurrence expected to happen continuously, regularly, or inevitably (1 out of every 500 exposures)? Frequent READ Most of the questions you're looking for are literally in the course summary which is still accessible while taking the quiz.