Autodesk Pre-Test Questions and Answers: A Guide to AutoCAD Fundamentals, Exams of Social Sciences

Download Autodesk Pre-Test Questions and Answers: A Guide to AutoCAD Fundamentals and more Exams Social Sciences in PDF only on Docsity!

1. Polygons can be circumscribed or inscribed about a circle. To complete the command, you need to specify the ______________of a circle. A) Diameter B) Radius C) Circumference D) Layer - Answers-B) Radius
2. Select an object which cannot be converted into a region. A) Ellipse B) Line C) Polygon D) Circle - Answers-B) Line
3. To combine more than one region into a single region, use the BOOLEAN operation: A) ADD B) UNION C) COMBINE D) FUSE - Answers-B) UNION
4. An xline is infinite in: A) Two directions B) One direction C) More than one direction

AUTODESK PRE-

TEST QUESTIONS

AND ANSWERS

D) Multiple directions - Answers-A) Two directions

5. The command used to place a multiline is: A) MLINE B) PLINE C) MULTILINE D) MTLINE - Answers-A) MLINE
6. To represent a circular hole in a 2D isometric view, which command do you use? A) CIRCLE B) ELLIPSE C) ISOCIRCLE D) SPLINE - Answers-B) ELLIPSE
7. Select the property which cannot be used by the SELECTSIMILAR command. A) Color B) Layer C) Name D) Scale - Answers-D) Scale
8. The DRAWORDER tool is located: A) On the Modify panel of the Home tab on the ribbon B) On the Plot panel of the Output tab on the ribbon C) On the Location panel of the Insert tab on the ribbon D) On the Interface panel of the View tab on the ribbon - Answers-A) On the Modify panel of the Home tab on the ribbon
9. In order to access the settings for MATCHPROP: A) You cannot have anything selected. B) Select an element with the desired properties. C) Type MATCHPROP, right-click and select SETTINGS. D) Type MATCHPROP, select an object, right-click and select SETTINGS. - Answers- D) Type MATCHPROP, select an object, right-click and select SETTINGS.
10. How do you remove objects from a selection set? A) Press and hold the SHIFT key and select the objects to be removed. B) Press and hold the CTRL key and select the objects to be removed. C) Press and hold the TAB key and select the objects to be removed. D) Press and hold the R key and select the objects to be removed. - Answers-A) Press and hold the SHIFT key and select the objects to be removed.

11. This tool allows you to control which layers are displayed in the layer drop-down list. A) Layer properties B) Layer state C) Layer filters D) Display options - Answers-A) Layer properties
12. When you use the Merge tool (LAYMRG): A) You can transfer the objects on one or more layers into the target layer. B) You can merge the common layer settings in one layer to be shared with the others. C) You can duplicate objects that are both on the merged layer, and the target layer is deleted. D) The merged layer is renamed. - Answers-A) You can transfer the objects on one or more layers into the target layer.
13. To move several objects you enter MOVE and select a line, a circle, an arc, and a text object, in that order. At the next "Select objects" prompt, you enter U. What does this do? A) It removes the test from the selection set. B) It removes the line from the selection set. C) It cancels the MOVE command. D) It creates an "unnamed group" from the selected objects. - Answers-A) It removes the test from the selection set.
14. After carefully selecting 20 objects, you realize that you selected one in error. What's the best solution? A) Press Esc and select only the ones you want this time. B) Right-click the object that you want to deselect. C) Press and hold SHIFT and select the object that you want to deselect. D) Double-click the object you want to deselect. - Answers-C) Press and hold SHIFT and select the object that you want to deselect.
15. There are several blocks named K-1054 in your current drawing. If you create a new block with the same name with a different appearance, what will happen? A) This is not possible. B) The existing blocks and the new blocks will appear different. C) The existing blocks update to the new block definition. D) The new blocks will update to the existing ones. - Answers-C) The existing blocks update to the new block definition.
16. An xref layer property override occurs:

A) When you change a layer property for an xref in the host drawing. B) When you change a layer property for an xref in the referenced drawing. C) When a layer property in an xref overrides a layer property in the host drawing. - Answers-A) When you change a layer property for an xref in the host drawing.

17. When placing a sketch on a construction plane, which plane is used? A) The XY plane. B) The YZ plane. C) The XZ plane. D) Whichever construction plane is active. - Answers-A) The XY plane.
18. True or False. You can move the origin of the UCS using grips. - Answers-True
19. Select the method which will align the UCS with the WCS: A) UCS, Previous B) UCS, Origin C) UCS, World - Answers-C) UCS, World
20. By default, the UCS and the WCS are: A) Aligned. B) Placed in different locations. C) Interdependent. D) Not displayed. - Answers-A) Aligned.
21. You are creating a kitchen elevation. You bring a CAD block of a cabinet into the drawing, but it is too small. Which scale option will quickly enlarge the cabinet? A) Enlarge and Resize B) Reference C) Size - Answers-B) Reference
22. What does the Layer option of the Offset command control? A) Controls the layer where the offset object is placed B) Changes the layer of the selected object to be offset C) Changes the color and linetype of the layer where the object is placed D) Changes the current layer - Answers-A) Controls the layer where the offset object is placed
23. After you select the endpoint of an arc, what multi-grip options are available? Select all that apply.

A) Stretch B) Lengthen C) Convert to line D) Extend - Answers-A) Stretch B) Lengthen

24. After you select the vertex of a six-sided polygon, what multi-grip options are available? Select all that apply. A) Stretch B) Lengthen C) Add Vertex D) Remove Vertex - Answers-A) Stretch C) Add Vertex D) Remove Vertex
25. To create a corner between two perpendicular lines: A) Select the FILLET command, select one line, press and hold the SHIFT key, and select the second line. B) Select the TRIM command, press ENTER, and select one of the lines. C) Select the EXTEND command, press the SHIFT key, and select both lines. D) Select the TRIM command, press the SHIFT key, and select both lines. - Answers-A) Select the FILLET command, select one line, press and hold the SHIFT key, and select the second line.
26. The Block Attribute Manager (BATTMAN) allows you to change all of the following EXCEPT: A) Whether an attribute is invisible. B) The prompt for the attribute. C) The default value for the attribute. D) The transparency value for the attribute. - Answers-D) The transparency value for the attribute.
27. What occurs if an external reference is attached as an overlay and you then use the host drawing where the overlay is attached as an external reference? A) The overlay external reference is automatically included with the host file. B) The overlay external reference is not included with the host file. C) The overlay external reference is included but shows as "detached." - Answers-B) The overlay external reference is not included with the host file.
28. You have a drawing with several blocks in it. You want to create a tool palette with the blocks in the drawings. What is the fastest and easiest way to do this using the Autodesk Design Center?

A) Launch the Design Center, located the drawing, select the Blocks folder, right-click, and select CREATE TOOL PALETTE. B) Launch the Design Center, launch the tool palette, create a new tool palette for the blocks, and drag and drop the blocks from the Design Center onto the palette one at a time. C) Launch the Design Center, launch the tool palette, create a new tool palette for the blocks, highlight all the desired blocks in the Design Center, right-click and select Copy, return to the tool palette, right-click and select Paste. - Answers-A) Launch the Design Center, located the drawing, select the Blocks folder, right-click, and select CREATE TOOL PALETTE.

26. The Page Setup Manager allows you to set all of the following EXCEPT: A) The printer/plotter to be used B) The layout name C) The paper size D) The plot scale - Answers-B) The layout name
27. Use this command on the application menu to publish one or more drawings to a plotter, printer, DWF, or PDF file. A) Print > Batch Plot B) Print > Plot C) Publish > Batch Plot D) Publish > Plot - Answers-A) Print > Batch Plot
28. The two types of plot style tables are: A) Color-dependent and named B) Color-dependent and group C) Properties and group D) Batch and publish - Answers-A) Color-dependent and named
29. Drawing Compare automatically displays ______________ to indicate the differences between drawings. A) Colors B) Revision Clouds C) Arrows D) Hatching - Answers-B) Revision Clouds
30. True or false. Bounded hatches are automatically associative. - Answers-True
31. When defining a table style, you can control each cell style. Each cell style stores setting for ____________, ____________, and ____________.

A) Text Style, Background Fill, and Cell Borders B) Background Fill, Text Style, and Cell Borders C) Background Fill, Text Style, and Cell Values D) Text Style, Background Fill, and Cell Values - Answers-A) Text Style, Background Fill, and Cell Borders

32. To insert symbols from a character map into multiline text: A) Copy and paste from the character map. B) Insert from a file. C) Type the character code in the multiline window. - Answers-A) Copy and paste from the character map.
33. If the SPELLCHECK tool can't provide a correct spelling for a word. A) You can type in the correction. B) You can look up the correct spelling using the browse button. C) You can look up the correct spelling by selecting the dictionary. - Answers-A) You can type in the correction.
34. True or false. You create a dimension style and then place some dimensions. You then modify the dimension style. Any dimensions using that dimension style will automatically update. - Answers-True
35. How do you identify the annotative scale of a text object? A) Hover over the text object. B) Select the object, right-click and select Properties C) Double click on the text object. - Answers-B) Select the object, right-click and select Properties
36. If a scale is not assigned to an annotative object but is used in a viewport, the annotation object is: A) Displayed at the incorrect scale. B) Not displayed. C) Too small. D) Too large. - Answers-B) Not displayed.
37. You create a block and place it in your drawing. You modify the block using the Block Editor tool and save the changes. What happens to the blocks already placed in your drawing? A) They remain the same. B) The blocks automatically update.

C) They are erased. D) The remain the same but will update if you type REGEN. - Answers-B) The blocks automatically update.

41. You select objects in Drawing A. You right-click and select Copy with Basepoint. You specify a basepoint. You switch to Drawing B. You right-click and select Pasta as Block. What is the result? A) The selected elements are placed as a group. B) The selected elements are placed as an unnamed block. C) The selected elements are placed as a block and exploded. D) The selected elements are placed as individual elements. - Answers-B) The selected elements are placed as an unnamed block.
42. When you use the Merge tool (LAYMRG): A) You can transfer the objects on one or more layers into the target layer. B) You can merge the common layer settings in one layer to be shared with the others. C) You can duplicated objects that are both on the merged layer, and the target layer is deleted. D) The merged layer is renamed. - Answers-A) You can transfer the objects on one or more layers into the target layer.
43. You use the Clipboard > Paste as Block method to create a block. The block is: A) Unnamed. B) Automatically exploded. C) Automatically inserted at 0,0,0. D) Never exploded. - Answers-A) Unnamed.
44. To add angles to the Polar Tracking list, place the steps in the correct order: A) Enter the desired angle, Select the Polar Tracking tab, Select New on the Polar Tracking tab, and Enter DSETTINGS. B) Enter DSETTINGS, Select the Polar Tracking tab, Select New on the Polar Tracking tab, and Enter the desired angle. C) Select the Polar Tracking tab, Enter the desired angle, Select New on the Polar Tracking tab, and Enter DSETTINGS. D) Select the Polar Tracking tab, Select New on the Polar Tracking tab, Enter the desired angle, and Enter DSETTINGS. - Answers-B) Enter DSETTINGS, Select the Polar Tracking tab, Select New on the Polar Tracking tab, and Enter the desired angle.
45. An array is used to: A) Place multiple instances of the same object(s) at set distances.

B) Place multiple instances of the same object(s) at variable distances. C) Place multiple instances of an object(s) along a ray at set distances. D) Place multiple instances of an object(s) along a ray at variable distances. - Answers- A) Place multiple instances of the same object(s) at set distances.

46. Which object are you able to add vertices to or remove them from? A) Arc B) Line C) Polyline D) Circle - Answers-C) Polyline
47. Use this command to save files or objects in a drawing to an stl format: A) Save as B) Export C) Convert D) Extract - Answers-B) Export
48. How to you maintian consistent spacing between dimensions? A) Use the DIMSPACE tool. B) Place dimensions using object tracking and entering in the same value. C) Snap to a grid when placing dimensions. D) Use the AUTOSPACE tool. - Answers-A) Use the DIMSPACE tool.
49. How do you change the annotative scale of a viewport? A) Select the viewport, right-click, and select Properties. B) Activate the model space of the viewport and change the annotative scale on the status bar. C) Select the viewport, and then change the annotative scale on the status bar. - Answers-A) Select the viewport, right-click, and select Properties.