Auvik Cert Exam Questions And Answers Latest 2025, Exams of Business Economics

Download Auvik Cert Exam Questions And Answers Latest 2025 and more Exams Business Economics in PDF only on Docsity!

Latest 2025

What Resources does auvik provide to ensure your experience with the product goes well? - correct answer ✅All of These what does this symbol represent? - correct answer ✅https://support.auvik.com/hc/en-us/articles/209729023-Auvik- map-icons-and-what-they-represent go to this website for symbols. in which of the following cases would you use a multi-client (multi- site) instead of a client (site) when adding a new customer or contract to Auvik? - correct answer ✅- Your customer is a university campus with several buildings you need to manage the equipment for.

• Your Customer owns and manages a small chain of hotels that serve clients near several tourist attractions. While Auvik has an alerting function, in order to use this feature you must configure all the alerts you want once you have the

Latest 2025

collector installed and deployed correctly. - correct answer ✅- True You and colleague just finish setting up a new site with Auvik. However, this new customer has different SLA's compared to your standard offerings as part of there contract. To help compensate for this, you and your colleague change serveral alert thresholds to be more sensitive for this particular client. Once you are done, you're colleague turns to you and ask how you should deal with the change management alerts going forward, because whenever the boss decides to change an alert setting for all your customers from the MSP dashboard it may undo all the customization you just did for the customer. What should you say to your colleague? - correct answer ✅- we dont need to worry about this, as Auvik alert inheritance doesn't overwrite alerts once a custom alert is set for a specific client. If no notification channel is set for an alert, then the alert will never trigger? - correct answer ✅- False How could you setup your alerts so that critical alerts go to all technicians, but warning alerts only go to lvl 1 and lvl 2 techs? -

Latest 2025

What is the difference between the default Administrator role and the Super Administration Permission Role? - correct answer ✅- an Administrator cant see the company billing details while a super admin can. What two pieces of information do you need in order to add an internet connection to the widget? - correct answer ✅- the outside interface MAC address

• Your Subnet default gateway What does this cloud on the network represent/? ( hint the white cloud icon auvik shows on the topology map) - correct answer ✅- Auvik does not have any credentials for the device
• it's a device without SNMP running
• It's and unmanaged switch/hub

Latest 2025

What kind of connection does this indicate? ( hint purple line between two firewall's on the auvik map ) - correct answer ✅- a tunnel connection between two devices

• a VPN or Layer 3 connection you can only overlay one VLAN on the topology map at once. - correct answer ✅- False What is this picture showing>? - correct answer ✅- removal & additions on two different configurations from the same device what is this map attempting to represent? ( hint standard looking auvik map ) - correct answer ✅- how traffic is flowing over the network

Latest 2025

• visually on the map You dont see a connection from your firewall to the internet cloud, what can you do? - correct answer ✅- Add the connection manually on the Home Dashboard > All internet connection widget if the auvik has picked up a public IP address.
• Manually create a ping check with your public IP address Match the symbol with the correct definition. - correct answer ✅- it looks like auvik can't interpret this device's CLI Match the symbol with the correct definition. - correct answer ✅- Valid credentials are required for this device Match the symbol with the correct definition. - correct answer ✅- Checking if your existing credentials can be used for this device.

Latest 2025

Match the symbol with the correct Definition. - correct answer ✅- Service is not enabled for this device When deploying the virtual collector, what do you need to make sure you have before you used and setup a shared-collector as opposed to a dedicated collector. - correct answer ✅- 2 more GB of RAM

• An additional vCPU
• Layer 3 connection to client sites If you wanted to dedicate a piece of hardware to being auvik collector machine, what kind of device could you use? - correct answer ✅- Home theater PC or similar specced PC
• Intel NUC
• Old workstations

Latest 2025

once a device is detected, how does auvik get deeper information from devices>? - correct answer ✅- SNMP

• SSH/TELNET
• Vmware API
• WMI A switch is reporting its make and model is Cisco, but instead if a switch its saying a Generic device. What could be the reason for the deice showing as generic? - correct answer ✅- Auvik does not have the right community string for the device.
• SNMP is not enabled on this device
• this is a device auvik has never seen before

Latest 2025

Choose the correct connection type ( black lines ) based on this picture. - correct answer ✅- Layer 3, logical IP to IP. Inferred Connections Choose the correct connection type ( blue lines ) based on this picture. - correct answer ✅- layer 1, physical connection between two devices An alert has the following text in the description field: The RAM module '$compenentINDEX' within device $deviceName is in a degraded state. what does the "$componentindex" do? - correct answer ✅- it is a variable. this means that when the alert is fires this text will be replaced with the device component index. You have created a custom alert. What is the best way to ensure the alert does not apply to any switches? - correct answer ✅- in the entities field ass "not:device type:switch" to your logic If alerts become repetitive, it is always best practice to first change the trigger conditions for these alerts. - correct answer ✅- False

Latest 2025

You want to stop receiving printer notifications for all your clients (sites.) What are your options to minimize the "noise"? - correct answer ✅- disable all printer alerts at the root (global) level

• Route al printer alerts to the client through a notification channel ( if allowed )
• set all the printer alerts to the "No Notification" option You changed the name of an alert on the client (site view) dashboard, then disable that same alert on the MSP (global View) Dashboard. The MSP (global view) dashboard 'disabling' of the alert will overwrite the changes made to the client alert. - correct answer ✅- False