Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

Class C Water Operator License Exam 2024-2025.Questions & Correct Verified Answers.Grade A, Exams of Water Resources Planning and Management

Class C Water Operator License Exam 2024-2025. Questions & Correct Verified Answers. Graded A

Typology: Exams

2024/2025

Available from 11/23/2024

NurseHelp
NurseHelp 🇬🇧

3.5

(2)

1.4K documents

1 / 12

Toggle sidebar

Related documents


Partial preview of the text

Download Class C Water Operator License Exam 2024-2025.Questions & Correct Verified Answers.Grade A and more Exams Water Resources Planning and Management in PDF only on Docsity!

Class C Water Operator License Exam 2024-

2025. Questions & Correct Verified Answers.

Graded A

_____ all shoring from the top down and _____ from the bottom up. - ANSinstall, remove ______ is the last barrier between the public and giardia or cryptosporidium. - ANSfiltration ______ is used to anchor pipe bends. - ANSconcrete _______ on a pipeline depend on the _____ or coefficient of pipe roughness. - ANSfriction loss, c factor ________ protection is the electrochemical method for preventing ________ of metal tanks. - ANScathodic, corrosion __________ occurs whenever there is a ______ in the velocity or direction of water flow. - ANSwater hammer, sudden change _____% of all the water on earth is saltwater. - ANS _____% of the earth's surface is ocean. - ANS

100, 150, 200 and 250 are approved classes of _____ _____. - ANSworking pressure 5/8 meters need to be tested at least every _____ to _______ yrs. - ANS5, 10 90% of underground pipe failures are related to improper - ANSbackfill and bedding A 5' deep pipe trench requires exit ladders every ____ feet and it needs to have approved ____. - ANS25. shoring A bacti sample should be taken every ____ft of pipe. - ANS A commonly used method to test for chlorine residual in water is called the ____ method. - ANSdpd A cross-connection is a connection between an _____ and an _______ water supply. - ANSapproved, unapproved A distribution system is a - ANSlooped system A general deposit of mineral particles evenly along the inside of the pipe is ________. - ANStuberculation

A mass of concrete placed at bends and valve structures to prevent pipeline movement is commonly called a _____. - ANSthrust block A piston meter is a _____ meter. - ANSdisplacement A standpipe is considered ground storage unless it exceeds _____ft above the highest ________. - ANS80, service connection A written sample writing plan is required for _______ monitoring. - ANScoliform According to the CDC, which mechanism or problem has caused more waterborne disease outbreaks in the US than any other reported factor? - ANSleaking backflows All public water systems in Texas are required to use _____ as the final disinfectant. - ANSchlorine Ammonia mixed with chlorine gas creates a - ANSwhite smoke An operator may refer to Piezometric elevation, static head, or pressure head as ____ height - ANSvertical water column An oxygen deficient atmosphere is defined as one which contains _____ than ______ % oxygen. - ANSless, 19.

Bacti records are kept for ____yrs and chemical records are kept for ___yrs. - ANS5, 10 Bacti sample bottles are prepared with a chemical called _____ before they are sterilized. - ANSsodium thiosulfate Bacti samples have to be returned to the lab within _hrs of the collection time. - ANS Baffling inside a storage facility may be needed to prevent "hot spots" and ____ flows. - ANSstraight through Bleach is approximately _____% pure. - ANS5. Characteristics of a Centrifugal Pump: as the head _____ the discharge ________. - ANSincreases, decreases Chlorine gas is ____ times heavier than breathing air. - ANS2. Chlorine gas is considered to be ____% pure. - ANS Chlorine is ______ times heavier than air. - ANS2. Chlorine is combined with ______ to form chloramines to prevent the formation of .... in surface water. - ANSammonia, thms

Color in the water supply should be less than _____ units. - ANS Concentrations of fluoride greater than (>) ___mg.L can cause ____ in teeth over time. - ANS2, mottling Condensation, evaporation, percolation, and precipitation are all components of the _______ cycle. - ANShydrologic Controlling valves regulate pressure flow ____ and flow _______. - ANSrates, direction Dead end mains should be flushed - ANSevery month Dead ends in a system are usually located on ____ shaped or ____ designs. - ANStree, grid Distribution systems are usually laid out in ____ and/or circular designs. - ANSloops Electrical demand in a wiring system is determined by the amount of ____ consumed. - ANSwatts Electricity is the preferred power source for most distribution systems because of ______, reliability and relatively low _______. - ANSavailability, cost

Excess nitrate causes a condition called - ANSblue baby syndrome Ground water supply systems serving more than ___ connections must have a total ground storage capacity of ___ gal/connection and elevated storage capacity of ___ gal/connection or pressure tank capacity of __ gal/connection. - ANS50, 200, 100, 20 Horsepower is defined as _____ft-lbs per minute or 746 watts. - ANS33, How can mechanical damage to water meters be avoided? - ANSplace it behind the curb and in a meter box HTH dry powder chlorine is set at ____% purity. - ANS Hydrants have a _____ point in case the hydrant is struck by a vehicle. - ANSbreakaway If a major chlorine leak occurs, call the supplier and the _____. - ANStceq If a repaired main line must be returned to service quickly, dose it with ____mg/L Chlorine, for ___minutes. - ANS500, 30 In Texas ___% of water is used for commercial, industrial or agricultural purposes.

  • ANS

In Texas ag water demands accounts for about ___% of the total water used. - ANS Killing disease causing organisms in the water is the primary purpose of ____ in water mains. - ANSdisinfection Ladders should be placed every ___ft in a ditch. - ANS Liquified chlorine gas will expand ____ times its original volume. - ANS Low doses of heavy metals, such as lead and copper, can cause damage to the ______ _____ ______ over time. - ANScentral nervous system Name one advantage to using centrifugal pumps. - ANSthey are easy to repair One by-product of chlorinated water is ____________, a suspected carcinogen when consumed in water over a lifetime. - ANStrihalomethane Out of all the water on earth, less than _____% of freshwater is immediately available to humans. - ANS Physical connection between a safe and potentially unsafe water source. - ANScross connection Powder activated carbon is commonly used to treat ____ and ____ problems in water. - ANStaste, odor

Public opinion of the water utility is _______ at a standstill. - ANSnever Safe withdrawal weight from a 150lb cylinder is ___lbs and 400lbs from a ____ton cylinder. - ANS40, 1 Service tap components usually consist of a tapping saddle, corporation stop, service line tubing, curb stop and a _____. - ANSmeter Sewer mains should be __ft away from water mains. - ANS Shoring should be used if a ditch is ___ft or deeper. - ANS Supply systems must maintain a minimum water pressure of ___ psi under normal conditions and at least ___psi during emergencies. - ANS35, 20 The _____ is the only cross connection control method approved by _______. - ANSair gap, tceq The ______ water pressure required by the rules and regulations is ____psi under any and all conditions. - ANSminimum, 20 The "Texas Hazard Communications Act" is known as the "____ ___ ____ Act." - ANSright to know

The 2 pathogenic protozoans resistant to chlorination are: __________. - ANSgiardia and cryptosporidium The 2 primary categories of pumps are: ____ and _____. - ANScentrifugal, positive displacement The action level for lead is ____mg.L, and for copper is ____mg/L. - ANS0.015, 1. The federal regulator of drinking water is the ___. - ANSepa The following minimum residuals is ______mg/L for free chlorine and ____mg/L for total chlorine. - ANS.2,. The main purpose of the water storage facility is to provide ____ amount of water to average or equalize the ______ demands plus provide ______ pressures to fight fires. - ANSsufficient, daily, minimum The most common collection point for a bacti sample is the water tap _______. - ANSoutside the house The most common type of water meter is the ____ ____ meter. - ANSpositive displacement The most common valve is the _______. - ANSgate valve

The most commonly used fire hydrants used in distribution systems are the _________. - ANSdry barrel The most difficult part of a water distribution operator's job. - ANSfurnish a continuous supply The operator should leave a ________ of slack in flexible tubing. - ANSgooseneck The primary goal of coagulation, sedimentation and filtration is to remove ____. - ANSturbidity The primary state regulator of water utilities is the ____. - ANStceq The process of separating floc from water by gravity is called ____. - ANSsedimentation The rated flow of a water meter, as stated by the manufacturer, is based upon ______ flow. - ANScontinuous The spoil bank should be located at least ___ft away from the ditch. - ANS The State recommends a TON (Threshold Odor Number) of less than ____. - ANS The State requires that _____ _____ be kept in storage for disinfection of new water lines. - ANScalcium hypochlorite

The term associated with water that evaporates from living plants is referred to as _____. - ANSevapotranspiration To be classified as a pws, the system must have at least __ service connections or serve at least __ individuals at least ___ days out of the year. - ANS15, 25, 60 Water hardness is caused by - ANScalcium and magnesium Water is stored to meet peak demand and to allow production facilities to operate at _______ rates. - ANSuniform Water with a pH less than 7 is considered to be - ANSacidic Water with a pH of 7.9 is considered to be ______ or _____. - ANSbasic, alkaline What are the three main components of a centrifugal pump? - ANSimpeller, case and shaft What is the main difference between surface water and groundwater contamination? - ANSgroundwater takes longer to recover after contamination What is the minimum setback distance for fire hydrants to avoid large vehicle overhang? - ANS2ft

What is the primary reason for using dry barrel fire hydrants? - ANSto keep it from freezing What type of water meter is used when the water flow widely fluctuates? - ANScompound When an operator isolates a motor from an operable system for repair, it is vital that he/she follow a _____/_____ procedure. - ANSlockout/tagout When chlorine gas is added to water, the pH goes down due to the two _____ that form. - ANSacids When disinfecting a water line, use ____mg/L of chlorine in the main and let stand for ____hrs. - ANS50, 24 When pressure testing the water main, the test pressure should be ___times as great as the ________ operating pressure. - ANS1.5, normal When residential water meters become worn, they have the tendency to ____ all flows. - ANSunder register When turning a centrifugal pump off, "this" must be done to prevent water hammer. - ANSclose the discharge valve You must coordinate a plan for shutdown of a water storage facility so that the distribution system will still be able to _____ upon and after the shutdown. - ANSmeet the customers demands