CSST TEST FINAL EXAM 2024 ACTUAL EXAM 2 VERSIONS (VERSION A AND B) COMPLETE ACCURATE EXAM, Exams of Nursing

Download CSST TEST FINAL EXAM 2024 ACTUAL EXAM 2 VERSIONS (VERSION A AND B) COMPLETE ACCURATE EXAM and more Exams Nursing in PDF only on Docsity!

CSST TEST FINAL EXAM 2024 ACTUAL

EXAM 2 VERSIONS (VERSION A AND

B) COMPLETE ACCURATE EXAM

QUESTIONS WITH DETAILED

VERIFIED ANSWERS (100% CORRECT

ANSWERS) /ALREADY GRADED A+

VERSION A

When must all assessments be given to the LEA (Local Eductaion Agencies) by? - ....ANSWER...within 30 days of the inspection

What is a z test? - ....ANSWER...It was an AHERA method that is not longer practiced. It takes the asbestos containing material and an acid, mixes them together and dilutes the material or dust so that only the asbestos fibers are present and the end-result determines the asbestos content by weight.

How long must exposure measurement records be kept by the employer? - ....ANSWER...at least 30 years

How long must medical surveillance records be kept by the employer? - ....ANSWER...For the term of the employment plus 30 years

How long must training records be kept by the employer? - ....ANSWER...1 year

I Beam= - ....ANSWER...web + flange + over spray x number of beams x length (always 2 webs and 3 flanges)

Protection Factor (PF)= - ....ANSWER...Co/Ci (Co is concentration inside mask/Ci is concentration outside mask)

TWA (Time-weighted average)= - ....ANSWER...[C1(T1)+C2(T2)+C3(T3)+....]/480 minutes or 8 hours - where C is concentration and T is time (minutes)

What does damaged mean in terms of a substance? (wall, ceiliing, parapet, etc.) - ....ANSWER...Up to 10% overall (scattered) damage OR up to 25% localized damage

Significantly Damaged? - ....ANSWER...Greater than 10% overall damage or greater than 25% localized damage

When are wet methods required? - ....ANSWER...Always required to control employee's exposure during removal, cutting, application, and clean-up

When are wet methods not required? - ....ANSWER...where employers demonstrate that the use of wet methods are not possible or feasable due to electrical hazards, equipment malfunction, roofing, or slipping hazard

What is a Bid Bond and how much is it worth? - ....ANSWER...Guarantees that the Inspection Company is bidding in good faith and the valuue of the bond is 5-10% of the Project estimated total cost

What is a performance bond? - ....ANSWER...Guarantees the completion of the contract according to the specifications and the value of the bond is up to 125% of the project estimated total cost

What is a labor/materials bond (payment)? - ....ANSWER...Guarantees that the inpsection company will pay all wages of the Employee and Suppliers and assure that any sub-contractors will get paid

What is a statuatory law? - ....ANSWER...a written law

what is a contract law? - ....ANSWER...a contract

what is common law? - ....ANSWER...Industry

what is TORT? - ....ANSWER...negligence

what is a personal injury suit? - ....ANSWER...someone gets hurt on the job and sues

How many decon units do you need at a job? - ....ANSWER...

What are the 5 decon units you need to have on a job? - ....ANSWER...Equipment room, air pocket, shower, air pocket, clean room

what is the lean ratio for a ladder? - ....ANSWER...1: (1 foot out for every 4 feet up)

What type of overlapping doors are required by OSHA on mini-enclosures? - ....ANSWER...Double flap doors

HEPA Filter? - ....ANSWER...High Efficiency Particulate Air (99.97 efficiency and collects any fiber up to 0.3 microns in diameter)

A generator (contractor) may temporarily store hazardous waste on a job site up to how long? - ....ANSWER...90 days

On an asbestos landfill, how soon must the asbestos waste be covered and at what depth? - ....ANSWER...within 24 hours and 6 inches of fill

what is the minimum size filter for a shower filtration system? - ....ANSWER...5 microns

in a decon, it is recommended that the top floor layer extend how far up the poly walls? - ....ANSWER... inches

what are the parts that make up a protective clothing ensemble? - ....ANSWER...coveralls, head covering (hood), foot covering (boots), and gloves

what are the minimum days of training required for: contracotr/supervisors? - ....ANSWER...5 days

what are the minimum days of training required for: worker? - ....ANSWER...4 days

what are the minimum days of training required for: project designer? - ....ANSWER...3 days

Fed Department of Transportartion code #? - ....ANSWER...

Half face respirators: - ....ANSWER...lowest allowable protection factor for asbestos work - 10

full face respirators: - ....ANSWER...a full-face negative pressure respirator has 5 times greater "protection" than the half face - 50

Powered Air Purifying Respirator (PAPR): - ....ANSWER...although still an air purifying respirator because it uses a filter to trap asbestos fibers created in the workplace, it is often preferred over the negative pressure respirator. The PAPR draws air through a filter using a motoroized fan unit - 100

Supplied Air Respirators (SARs): - ....ANSWER...supplied air respirators proved the highest respiratory protection available. They have a greater protection factor than air-purifying respirators because they are not using filters to clean the air inside the asbestos work area. They provide, either through airlines or tanks, a source of

processed air that is independent of the air in the work area - 1000

What modes can a SAR operate in? - ....ANSWER...Continuous flow, pressure demand, or demand flow

What mode does a SAR have to be in when testing it?

• ....ANSWER...Continuous flow

What are the two types of fit tests? - ....ANSWER...Quantitative and Qualitative

What is a quantitative fit test? - ....ANSWER...analytical determination of the concentration of the test agent inside of the face piece compared to outside the facepiece - these tests are expensive and tedious

How often is quantitative fit test required? - ....ANSWER...every 6 months

what is a qualitative fit test? - ....ANSWER...not an analytical measurement, but a subjective test where

What portion of insurance coverage for medical exams and monitoring as required by law must the contractor provide? - ....ANSWER...all of the cost

Responsibility for ACM control in a building is primarily that of the - ....ANSWER...owner

The category least suspected of releasing asbestos fibers into the air because of friability is - ....ANSWER...miscellaneous products

The program manager can speed up the sampling process when preparing for a building inspection for asbestos by revealing ACM in the - ....ANSWER...blueprints

Before plastic barriers are set up, the work area should be - ....ANSWER...wet cleaned

What percentage of Federal, commercial, and residential construction before 1970 contained asbestos in pipe or boiler insulation? - ....ANSWER...20%

The efficiency of the negative air pressure unit or cabinet is determined by the - ....ANSWER...Magnehelic guage and the manometer

Disposal bags are primarily made of which type of plastic? - ....ANSWER...A minimum of 6 mil

A contractor must sign the contract and execute the bonds _____ days after being awarded the bid - ....ANSWER...5 days

What should be posted "in plain view" of workers at teh jobsite to ensure safety? - ....ANSWER...Emergency telephone numbers

For a negative air pressure unit or cabinet, what volt-power supply is needed? - ....ANSWER...115 volt

Assembly Bill 2040 requires warning signs to state - ....ANSWER...Danger- asbestos cancer and lung hazard- keep out!

Mesothelioma is a cancer of - ....ANSWER...the lining of the lungs

Usually asbestos related disease will not show up for - ....ANSWER...15 to 40 years

HVAC units should be - ....ANSWER...shut off and locked down

The negative air pressure unit must have at least how many prefilters? - ....ANSWER...

The room used to store equipment is called the - ....ANSWER...dirty room

Negative air pressure systems use_____ filters - ....ANSWER...HEPA

After clean up procedures have been completed, a negative air pressure unit or cabinet should run ____ hours. - ....ANSWER...4 hours

The three forms of abatement are encapsulation, removal, and - ....ANSWER...enclosure

The size plastic that should be used for walls is - ....ANSWER...4 mil

What is an important factor causing ACM disturbances in schools, band practice rooms, and gyms? - ....ANSWER...vibration

What is one of the most common reasons an encapsulation procedure would not be used? - ....ANSWER...For impariment of acoustical properties, for texture, for accessibility

When working on asbestos, all hand operated and power equipment which will increase the asbestos fibers concentraction in excess of the limits must have tools that - ....ANSWER...are controlled by a controlled exhaust, ventilation system

Who/What is responsible for establishing engineering controls such as, isolation, enclosure, exhaust ventilation and dust collection and the exposure limits in the state of California? - ....ANSWER...Title 8, Section 1529 and 5208

the epa does not have a category for acm in - ....ANSWER...insulation on tanks

the 5 criterias the epa has on sealants for encapsulation are - ....ANSWER...impact resistance, flame spread, smoke generation, toxic gas release during combustion and adhesive/cohesive strength.

how large should sections be when removing acm from duct and pipe work? - ....ANSWER...areas that are easy to handle (generally min of 3 feet)

when an injury occurs in a contaminated work place, what is the accepted rule? - ....ANSWER...the seriousness of the injury must be determined and then you proceed accordingly

prior to beginning an asbestos abatement job, the contractor must notify the police department, fire department, emergency medical unit and ___ in writing - ....ANSWER...department of health services

assembly bill 2040 does not require which of the following regarding notification of regulatory authorties - ....ANSWER...not require- the individual who owns the building

does require- the dates of the project, where the job is located, the supervisor of the job

resp protection must be worn when wet handling methods are not feasible or are incapable of controlling the concentration. what is the limit of asbestos in the air allowed for the use of reusable or single air filtrering resperators in accordance with section 5208? - ....ANSWER...10 times the limit

powered air filtering respirators can be used for lower concentrations, but must be worn when the asbestos fiber concentration is over______ - ....ANSWER...10 times, but not more than 100 times the limit

if the asbestos fiber concentration is over 100 times, which of the following must be worn? - ....ANSWER...continuous flow respirators

pressure demand air line respirators