CSX Conductor 2024/2025 FINAL REVIEW Exams with 100% correct verified Questions and Answer, Exams of Business Statistics

Download CSX Conductor 2024/2025 FINAL REVIEW Exams with 100% correct verified Questions and Answer and more Exams Business Statistics in PDF only on Docsity! CSX Conductor 2024/2025 FINAL REVIEW Exams with 100% correct verified Questions and Answers 2024/2025 Who is Responsible for making Pay Claims? Ranking Employee or Employee to be paid What is the Hand Signal for Reduce Speed? Arm out horizontal over the track Which of the following are allowed by the Rulebook? Always take the safe course What is the Hand Signal for Release Air Brakes? Hand held overhead when Equipment is Standing Who authorizes a Utility Employee to join an Assigned Crew? Ranking Employee What is the normal position for a switch or derail? In the "on" or derailing position Before lining a switch or derail, an employee must? 1) Ensure that any preceeding movement has passed clearance points. 2) Ensure that the device is not locked, spiked, or tagged "out of service" If a lock is found to be defective or missing on a main line switch or derail an employee must? 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions of said Dispatcher/Trainmaster When an Employee determines that a switch or derail is defective, the employee must? 1) Not operate the device. 2) Report device to Proper Authority You are standing in a yard using multiple switches on long shoves. After lining each switch an employee should check what? That all switch points are flush and aligned properly. When using a portable radio in a shove move, Employee instructions must specify what? 1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned for the move What is a System of Tracks, other than main tracks and sidings, used for making up trains for storing cars and other purposes? Yard 1) Do not extend over the drawbar when adjusting hoses. 2) make certain that BOTH anglecocks are closed before adjusting hoses with hands. When handling a EOT device, an employee must... 1) Secure EOT air hose by s hook if available. 2) Do not place the EOT where it may become a tripping hazard When lifting objects what safety steps must be taken? 1) Never use Excessive Force. 2) Assume a balanced posture. Your Coworker is acting in an unsafe manner, what should you do? Warn the employee of their unsafe behavior When must an employee report an injury? Immediately or prior to leaving CSX Property. What hazards must be avoided when performing tasks? 1) Pinch Points. 2) Excessive Force When is CSX Ear Protection required? 1) when within 100' of a locomotive in any position other than idle. 2) When providing flag protection at a crossing or grade. when outside of an office environment, boots must have what? Oil Resistant Soles When are CSX Safety Glasses required? 1) When on or about tracks or equipment on tracks. 2)when riding in a locomotive with the windows open whenever possible, how must air hoses be separated? After closing "Appropriate Anglecock" allow train movement to separate hoses If couplers are not aligned, how much space is required between the cars before they can be safely adjusted? 50' When using a radio, what features are required? 1) Chest type radio harness. 2) Holster or radio clip with lapel mic When applying a side mounted hand brake, an employee must have stable footing and what? 1) Be facing the car. 2) Use one hand to operate the brake, and the other hand placed firmly on the car Hours of Service 1545 1100 How much rest is required after 10 hours of work? 10 hours what is the maximum amount of time allowed in train service? 12 hours when mounting the side of a moving car, employees must, face the car, maintain 3 points of contact, and what? 4 mph What is true about train speeds? They must not be exceeded Whenever dealing with a conflict between two speeds, which speed should be chosen by the conductor? The lowest speed You are operating a single locomotive through a receiving yard and you are operating at restricted speed. What speed should not be exceeded? 10 mph its a yard What is the speed that permits stopping at half the range of vision. Permitting a stop short of a train, car, obstruction, on-track equipment, stop signals, derails, and improperly lined switches. Also permits looking for BROKEN RAIL Restricted Speed Your train left the main track through a hand thrown switch into a non-signaled yard. What speed is not to be exceeded? 10 mph The Appearance of a fixed signal as viewed from the direction of an approaching train Signal Aspect The information conveyed by the aspect of a signal Signal Indication A block signal equipped with a number plate, a G marker, or a P marker that conveys Restricted Proceed as the most restrictive aspect Intermediate Signal A color light, color position light, or semaphore signal that conveys Stop as its most restrictive speed and does NOT have a P marker, C marker, APP marker, or a G marker Absolute Signal Train speeds are authorized by the Operating Rules, Special Instructions and...? 1) Signal Indication. 2) Dispatcher Message Unless otherwise specified, speed restrictions apply to the ___________ Train Entire What must and employee receive before occupying a controlled track? Dispatch Bulletin and Release Form You are on the Q31715 train, on duty at 0700, your release form is 3 Hours and 57 Minutes old. What action is required? None You are on the Q31715 train, during your job briefing you discover a irregularity with your release form other than crew names and ID numbers. After talking to a dispatcher what action is required? Obtain a corrected Dispatch Bulletin The Conductor and Engineer are required to obtain a legible copy of a Dispatch Bulletin and Release Form. Is that all that is required? NO, they must ensure that all documents correspond to each other Where are Temporary Track Restrictions designated? 1) Dispatcher Messages. 2) Form EC-1 Where are Permanent Track Speeds designated? Special Instructions Who may instruct you to leave your initial terminal without Train Documentation? The Chief Train Dispatcher You are relieved before reaching your final destination. What must you do with any CSX Train Documentation? Leave it on the Head locomotive in a location where it will be easily found When handling a Multiple Unit consist with no cars, what speed must not be exceeded? Freight Train Speed When a train dispatcher transmits a release form verbally, a conductor must what? Repeat the bulletin number and confirm the number of messages If the engineer exceeds authorized track speeds, what action is required? 1) If exceeding authorized speeds by less than 5 mph, Instruct your engineer to slow down. 2) If exceeding by more than 5 mph, instruct your engineer to stop the train. If no action is taken conductor must stop the train and report. How far in advance of a speed restriction should a conductor warn his/her engineer? No less than 2 miles before restriction, but no more than 5 miles. A computer-generated or hand-written document consisting of tonnage graph, Restricted or special handling list, CT-168, Hazmat forms, and train listing and Hazmat Endorsements CSX Train Documentation Which of the following are considered Special Instructions? 1) Timetable. 2)System Bulletin T/F When recrewed at a point other than a designated recrewing point, the new crew must contact dispatcher prior to any move. True What speed must not be exceeded at "Limited Speed" 45 mph What speed must not be exceeded at "Medium Speed" 30 mph What speed must not be exceeded at "Slow Speed" 15 mph When operating on Excepted Track, what speed must not be exceeded? 10 mph Trains using a non signaled siding, operating at restricted speed must not exceed what speed? 25 mph Any shipment that exceeds a published clearance limitation for the specified route of movement and/or requires specific operating handling procedures for safe movement. Clearance Implicated Shipment You are instructed to pick up a cut of 30 loaded coal cars from a customer and add them to your train. Where must these cars be located in your train? At the head of your train, directly behind the locomotive/s When moving a Clearance Implicated Shipment within a yard without Clearance Bureau Authorization, where must the Load be located? Where the crew can observe the load Loaded Auto-Rack cars must be not be placed in a train behind what? 1) Open top cars loaded with stone, coal, or gravel. 2) Open top cars loaded with sand When must the doors of a railcar equipped with plug doors be closed? Before any movement How many hours is a Class 1 brake test considered "good" after your train is off air? 24 Hours T/F When performing a Class 1 brake test you must check that the brakes apply and release on each car True If you retest a cars air brakes after a failed air test, how long must the brake remain applied? 3 minutes Which of the following are true about a Class 1 Air Brake Test? Both sides of a car must be examined at some time in the inspection process to observe the functioning of all moving parts of the brake system To what device do you arm the EOT to? HTD - Head of Train device What is the purpose of a Branch Pipe Cock? To cut the brake control valve into or out of service What is the term used to describe when the air brake system on a car or cut of cars is not being supplied with air pressurized to 60 psi or more? Off Air T/F Before performing a roll-by inspection to verify air brakes release during a Class 1 brake test, do both sides have to be inspected? True What speed is not to be exceeded during a roll-by inspection? 10 mph S/A Telemetry can be used to perform an air brake test and meet 2 way equipped requirement when the following conditions are met 1) The controlling locomotive has and operative HTD 2)rear car is equipped with an operative EOT capable of 2 way communication How many working air brakes must you have before performing a Class 1 brake test? Each car must apply and release You are operating on the main line at 35mph when you encounter a warning sign that is not in your dispatcher messages or EC-1. How should you direct the train to proceed? Be prepared to stop in 2 miles, if no conditional stop or temporary reduce speed signs are encountered, proceed at restricted speed for an additional mile. You are operating on the main line at 35 mph when you encounter a conditional stop wayside sign that is not listed in your dispatcher messages or EC-1. How should you direct the train to proceed? Stop as soon as possible and report to the dispatcher S/A You are operating on a coal train on the main line when you suddenly experience an emergency application of the brakes. What conditions must be met before proceeding? 1) Brake pressure must be applying and restoring at the rear of the train 2) Train brakes properly release Your train has failed to stop at a red signal and has fouled the main track. In which directions must you provide protection? Both directions S/A In addition to the lead locomotive, where else are you required to have fuzees and red flags for flagging protection? 1) Shoving Platform 2) Occupied Caboose your dispatcher has provided an EC-1 advising of a crossing gate activation failure at Main Street. Dispatch has also informed you that there are no police or flagmen present at the scene. What action is required? Stop and protect the crossing until head locomotive has occupied the crossing Your dispatcher has provided an EC-1 advising you of a false/partial activation of a gate crossing on Main Street. Dispatch ha also informed you that there are no police or flagmen present at the scene. What action is required? Proceed with caution, not exceeding 15mph through the crossing Your train is on the main line and just passed a clear signal when you encounter a burning fuzee on your track. What action is required? Reduce to restricted speed for 15 minutes What percentage of operating air brakes are required before departing your initial terminal? 100% Who is required to ensure that a train has all the necessary supplies? Each Crewmember What is a valve located at each end of a locomotive or car, used to open or close the brake pipe? Anglecock What is an air supply line used in yards and other areas to charge car air brake systems for testing purposes or to supply air to a train or block of cars that have already been class 1 brake tested? Yard Line Air T/F Standard operating pressure for a brake line is 90 psi True S/A Prior to performing a brake test, what must you make certain of? 1) Air hoses are in serviceable condition and properly connected 2) anglecocks, endcocks, and cut-out cocks are in the proper positions S/A When your train has an in route failure of the auxiliary lights, but your main headlights are still functional, how must you proceed? 1) When one light fails, continue to the next calendar-day inspection 2)When both lights fail, do not exceed 20mph and continue to the next location where repairs can be made When your train receives permission to pass a train in emergency, What speed must not be exceeded? Restricted Speed S/A When protection from the ground is required at a crossing, what steps must be taken? 1) Stop movement before fouling the crossing 2) Place burning fuzees on BOTH sides of the crossing When shoving through a crossing without functional gates, outside of a csx yard, how must the crossing be protected? The train must be protected by a qualified employee on the ground 4052.1 You are inspecting your train and discover a car that is unsafe to move in your train. Who should you notify? Supervisor or Train Dispatcher 4302 S/A After passing a wayside Defect Detector, what should you do? 1) Listen for audible inspection result on radio 2) If a defect is reported, stop and inspect the reported defect 4451 You are inspecting your train and find a car that is flagged as overweight. Who has the authority to to give you permission to move your train? Customer Service Center or Clearance Bureau 401.6 If you encounter a missing lock on a switch or derail where a lock is required, and a lock is not readily available, what should you do? Report the device to the Proper Authority 401.7 S/A What must you do if you determine a switch or derail to be defective? 1) Do not operate the device and report to Proper Authority 2) Tag the device as defective 407.2 Whenever it is necessary to leave equipment beyond the clearance point fouling adjacent tracks, what safety precautions must be taken? Ensure that you completely occupy the switch to the connecting tracks. 503.11 How often must you announce by radio, that your train is stopped on the main line? Upon stopping and every 15 minutes until moving again 5002 What is the minimum percentage of functional air brakes required on an en route freight train? 85% in the rear car 4102 When moving equipment with a hot bearing, what speed must not be exceeded? 4 mph 5003.1 S/A When must you cut the air brakes out on a railcar? 1) If brakes do not release when it should 2) When car must be moved with an overheated bearing 405.2 S/A What precautions must be taken when working at an industry? 1) Moves must only be made when all gates, doors, and other devices are fully opened and fastened 2) do not make any moves if the track or flangeway is obstructed by sand, dirt, gravel, snow etc. and notify the proper authority 404.1 You must ensure which of the following before releasing the handbrakes on railcars? The cars must be coupled to a locomotive 401.14 You are working in a location where main track switches are operated by hand. What precautions must be taken before departing? Each crewmember must verbally confirm the switch position has been locked or reset to the position required by the dispatcher 409.4 You have been instructed to leave 2 cars on Track 2, to test the handbrakes you must release the airbrakes and observe the cars for how long? 1 minute 403.1 S/A When must permission from a train dispatcher be received before operating an electrically locked switch or derail? 1) When entering signaled track 2) When crossing from one signaled track to another 401.13 S/A You are running on the Q63414, the next customer you must work is on a single main track, with access through an electronically controlled switch and derail. the dispatcher instructs you to clear up on the industry track. prior to reporting the track is clear what must you do? 1) Restore the switch to main track movement 2) Restore the derail to the derailing position 504.8 If a train enters a block on a proceed indication signal and then stops, how must the train proceed? Proceed prepared to stop at the next signal and not exceed 40 mph unless governed by a slower signal 505.12 You are operating in "Dark Territory" and have operated a hand thrown switch. You must record the information about the position of the switch on what form? SPAF (Switch Position Awareness Form) 4052 While removing cars from a customer, you notice that one of the cars is unsafe to move, what must you do? Contact your Supervisor or Dispatcher for instructions 1101 When blue flag protection is displayed, you must not pass the blue flag with a locomotive or cars. What other restrictions must be followed? You cannot move or couple to the cars where Blue Flag protection is active except when governed by the rules of a car repair or shop track 1101.3 What are Blue Flag Signals used to indicate? that workmen are on, under, or between rolling equipment 1101.3 Who may remove a Blue Flag Protection? Only an employee of the same craft or group that originally displayed the Blue Flag Protection Glossary - What is any shipment that exceeds a published clearance limitation for the specified route of movement and/or requires specific operating handling procedures for safe movement? Clearance-Implicated Shipment Before any movement 409.5 What is required when leaving a car with defective hand brakes unattended? It must be coupled to at least one additional car with tested hand brakes 412.1 T/F You are not permitted to leave a Key Train unattended on a main line unless permitted by special instructions or dispatcher permission True 4101/4101.2 S/A Which 2 methods may be used to test a bearing for excessive heat? 1) Templestik 2) Carefully passing your hand over the bearing without touching it 4101.3 T/F After inspecting a bearing reported to be hot, you determine that the bearing is not overheated. Are you still required to attach a Hot Bearing tag to the car? True 4456 S/A How do you determine the Left or Right sides of a railcar? 1) Face the car from the "B" end 2) the stenciled "L" will correspond to the Left side and the "R" will correspond to the Right side of the car 4102 What speed must not be exceeded when moving a car with an overheated bearing? 4 mph 5003 In order to cut out the air brakes on a car you must close which valve? Branch Pipe Cut-Out Cock 4450.1 S/A When must boxcar doors and bottom discharge outlets of hoppper cars be closed? 1) Before departing customer facility 2) Before adding to a train 502.1 T/F Tracks other than main, signaled, or sidings may be used without dispatcher permission? True 409.3 S/A After applying appropriate number of hand brakes you must ensure that the brake chain is still tight on the cars and what else? 1) Instruct the engineer to release the air brakes and independent brake 2) Verify that brake shoes on the "B" end of the car are against the wheels with hand brake applied Your train has received a report of a defect from a Defect Detector on Axle 50 East Tail of your train. upon inspection no defect is found. What must you do? Inspect the equipment 20 axles forward and rearward of the defect zone