Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

CWEA Collections Grade 2 Practice Test: Questions and Answers, Exams of Physics

A set of practice questions and answers for the cwea collections grade 2 exam. It covers various topics related to wastewater collection systems, including pump operation, sewer maintenance, traffic control, and safety procedures. The questions are designed to test knowledge and understanding of key concepts and practices in the field.

Typology: Exams

2024/2025

Available from 01/29/2025

BestieNurse
BestieNurse 🇬🇧

299 documents

Partial preview of the text

Download CWEA Collections Grade 2 Practice Test: Questions and Answers and more Exams Physics in PDF only on Docsity!

CWEA Collections Grade 2 Practice Test.

Questions and Correct Answers. Graded

A

"Spring Blades" are a type of tool used with: - ANSPower Rodder A clogged impeller can cause a pump to deliver less than its expected rate of discharge, true or false? - ANSTrue A flow of 650 gpm would be how many MGD? - ANS650 gpm x (1440 min / 1 day) = 936000 gpd 936000 x (1 MG / 1000000 gal) = 0.936 MGD A person who completes a training program in accordance with the requirements of Title 8, Calif. Code of Regulations, Minimum Guidelines of the Common Ground Alliance is considered a Qualified Person, true or false? - ANSTrue A wet well 20 feet in diameter is filled with water to a depth of 10 feet. How many gallons does the tank contain? - ANSVolume = 0.785 x Diameter x Diameter x Height Volume = 0.785 x 20 ft x 20 ft x 10 ft Volume = 3140 cu ft Convert to gallons: 3140 cu ft x (7.48 gal / 1 cu ft) = 23487.2 gal

According to a State Water Resources Control Board order, each Enrollee must develop and implement a system-specific: - ANSSewer System Management Plan (SSMP) After completing a Temporary Traffic Control setup for your work zone it is a good practice to: - ANSObserve how effective your TTC setup is working to control traffic and make the necessary changes to it if necessary An upright circular cylinder tank (flat bottom) has a diameter of 12 feet. When filled to a depth of 8 feet, what is the volume? - ANSVolume = 0. x Diameter x Diameter x Height Volume = 0.785 x 12 ft x 12 ft x 8 ft Volume = 904.32 cu ft Barrels, lids, cones, and backflow devices are all included in Manholes, true or false? - ANSFalse. All are included except for backflow devices. Before starting a maintenance operation in a basement located in the backyard of a residence you should contact the resident and politely as permission to enter the backyard, true or false? - ANSTrue Biological activity in long, sluggish-flow, flat grade sewer lines will likely cause odors, true or false? - ANSTrue Category 1 SSO's that discharge to a drainage channel and/or surface water must be reported within: - ANS2 hours

How many different areas of traffic zones are there when working in roadways? - ANSFive How many types of common shoring are there? - ANS How often must an excavation site and adjacent areas be inspected for hazardous conditions? - ANSDaily If an 8 inch force main has a metered flow rate of 400000 gpd, what is the velocity? - ANSVelocity = Flow / Area Area = 0.785 x Diameter x Diameter When finding Area, convert Diameter into feet 8 in x (1 ft / 12 in) = 0.667 ft Area = 0.785 x 0.667 ft x 0.667 ft = 0.349 sq ft Convert flow in gallons to cubic feet per second: (400000 gal / 1 day) x (1 cu ft / 7.48 gal) x (1 day / 24 hours) x (1 hr / 60 min) x (1 min / 60 sec) = 0.619 cu fps Velocity = 0.619 cu fps / 0.349 sq ft Velocity = 1.77 fps If it takes 7 minutes and 30 seconds for dye to travel a distance of 860 feet through an 8 inch sewer, what is the velocity in feet per second? - ANSVelocity = Distance / Time Convert minutes to seconds: 7 min (60 sec / 1 min) = 420 sec Velocity = 860 ft / (420 sec + 30 sec) Velocity = 860 ft / 450 sec

Velocity = 1.91 fps Infiltration can be caused by cracked pipes, true or false? - ANSTrue Infiltration from a high water table can be one source of excessive clear water in a collection system, true or false? - ANSTrue Lift station failure can include electrical circuit failures, true or false? - ANSTrue Maintenance programs are based on preventative and corrective maintenance principles, true or false? - ANSTrue Minimum design velocity for a sewer should greater than: - ANS2 feet per second Offset joints are one hazard that may damage a TV camera going through a sewer, true or false? - ANSTrue Once enrolled in CIWQS, the "Collection System Questionnaire" must be updated at least every: - ANS12 months One of the advantages of using CCTV is that the length and severity of defective pipe areas can be recorded, true or false? - ANSTrue One way members of a bailing crew can communicate with each other is by using hand signals, true or false? - ANSTrue

Temporary traffic control lanes created as part of a Temporary Traffic Control Zone setup on a street with a 35 MPH maximum speed limit shall be a minimum width of: - ANS10 feet The gas most commonly associated with septic wastewater is: - ANSHydrogen Sulfide (H2S) The goal of preventative maintenance is to avoid breakdowns, severe damage, or harmful depreciation, true or false? - ANSTrue The interior of 300 feet of 12-inch pipe is uniformly coated with one inch of grease. How many gallons will this pipe hold when filled with water? - ANS12 inches (diameter of pipe) - 2 inches (grease on pipe) = 10 inches Convert inches to feet: 10 inches x (1 foot / 12 inches) = 0.833 feet Volume of a right regular cylinder: V = 0.785 x Diameter x Diameter x Length of Pipe V = 0.785 x 0.833 ft x 0.833 ft x 300 ft V = 163.41 cubic feet Convert to Gallons: 163.41 cu ft x (7.48 gal / 1 cu ft) = 1223.31 gal The lack of an unpleasant odor in a structure does not always mean that dangerous gases are not present because: - ANSSome dangerous gases have no odor The lowest point on the inside of a pipeline is called the: - ANSInvert

The main reason for adding sodium hypochlorite to sewers is to control: - ANSOdor The oxygen level alarm in a gas detection meter is normally set to go off at oxygen levels below: - ANS19.5% The term "transition area" is one component of a: - ANSTraffic Control Zone To find proper protective gear before application of a product, you would: - ANSLook at the MSDS (Material Safety Data Sheet) To report in the Statewide SSO Data-base California Integrated Water Quality System (CIWQS), regarding the location of a Category 2 SSO, you must know: - ANSthe GPS coordinates Using high velocity cleaners is one method included in hydraulic sewer cleaning, true or false? - ANSTrue Vitrified Clay pipe is a Rigid type of pipe, true or false? - ANSTrue What document would you require to be referenced when developing an S.O.P. for hazardous substance spill cleanup as well as spill containment?

  • ANSM.S.D.S.

What key factors would you need to address when developing an S.O.P. for Lift Station failure? - ANSTraffic control plan, by-pass connections, and spill containment. What tool would you use to cut VCP pipe? - ANSChain pipe cutter When a citizen wants information regarding a maintenance operation you should give them as much factual information as you can, and offer to help them further, true or false? - ANSTrue When developing an S.O.P. for scheduled maintenance of electrical equipment, what program should be addressed as a primary safety guideline? - ANSThe L.O.T.O. (Lock Out Tag Out) Program Which conditions should a gas detection device test for? - ANSHydrogen Sulfide, explosive/flammable gases, oxygen. Why are gasoline and volatile solvents objectionable when present in a sewer? - ANSThey produce an explosion hazard Why are wear rings installed in a pump? - ANSTo concentrate wear on rings instead of volute and impeller Why must you always know the distance when a cleaning tool is in a sewer? - ANSSo you know where obstructions or difficulties are encountered

Why should hydrogen sulfide be controlled? - ANSTo protect sewers and structures from corrosion Working in an un-sloped trench with no shoring is one option of Protective Shoring Systems, true or false? - ANSFalse. Some options are proper stopping or benching of the sides of the excavation, supporting the sides of a trench with shoring, and using a shield in the excavation area. You receive a call at 4:30 pm about a sewer spill that was seen spilling since 2 pm. You arrive at 5:15 pm and estimate the sewer spilling at 166 gpm. You clear the stopage 22 minutes after your arrival. How many gallons were unrecoverable? - ANSDuration x Flow Rate = Spill Volume 217 min x 166 gpm = 36022 gal You received a sewer spill call at 1100 hours, arrived on site at 1115, and your crew relieved the stoppage at 1127. You estimate the spill was running at 6 gallons per minute. How much sewer went un-captured? - ANSDuration x Flow Rate = Spill Volume 27 min x 6 gpm = 162 gallons You should never attempt to install, troubleshoot, maintain, repair, or replace electrical equipment unless: - ANSYou know what you are doing, are qualified, and are authorized.