FDNYC G60 Practice Exam (112 Questions) With 100% Correct Answers, Exams of Health sciences

Download FDNYC G60 Practice Exam (112 Questions) With 100% Correct Answers and more Exams Health sciences in PDF only on Docsity! FDNYC G60 Practice Exam (112 Questions) With 100% Correct Answers All torch operators, an oxygen-fuel torch using any amount of oxygen and flammable gas and fire guards must have a current - Certificate of Fitness The Certificate of Fitness holder - must regulate the pressure and flow of oxygen and natural gas to each torch. if the torch operator for jewelry manufacture involves - any oxygen with any fuel gas containers, the operator must be a C of F holder. A Certificate of Fitness Holder must keep his or her certificate - on their person or otherwise readily available for inspection by any representative of the fire Department The easiest way to extinguish a fire caused by a leak is to - close the shutoff valve Permits issued by the FDNY are required to conduct the following hot work: - storing, using or handling oxygen and a flammable gas, storing, using or handling any flammable gas (e.g. LPG or CNG or acetylene) in excess of 400 SCF. Storing, using or handling any oxidizing gas (e.g. oxygen) in excess of 504 SCF. For LPG, 400 SCF is - approximately 47 lbs the number of LPG containers for the storage, use, handling or transportation, requiring a permit - 14.1 oz = 54 cont. 16.4 oz = 46 cont. 20 lbs = 3 cont. 33.5 lbs = 2 cont. 40 lbs = 2 cont. 100 lbs = 1 cont. Portable LPG containers that are more than 16.4 oz and CNG containers with a capacity greater than 8.7 SCF - must NOT stored, handled, or used indoors in the following occupancies (as defined in the Building code): residential occupancies, factory and industrial occupancies; educational occupancies; institutional occupancies, except as the commissioner may authorize by rule. Site-specific permit - may be a permanent permit or a temporary permit. Permanent permits are valid for 12 months only A city-wide permit is valid - up to 30 days Permits shall be - readily available on the premise for inspection by Fire Department representatives. Hot work authorization should be issued by the responsible person, and it - must be available for inspection by any representative of the department during the performance of the work, and for 48 hours after the work is complete FDNY permits - will be posted in a central location and recorded in a log book to assist in the coordination of construction related activities. CNG - Compressed Natural Gas. For Citywide hot work operations, the Owner of the premises must be notified in writing at least _____ hours in advance prior to work beginning. - 48 A class A fire extinguisher fights fires from - Paper How old must a candidate be in order to earn a Certificate of Fitness? - 18 Years Old What type of fire is a Class B fire extinguisher used on? - Oil Examples of combustibles include - Newspaper Persons conducting Torch Operations must possess a current - G-60 Certificate of Fitness A rapid, persistent chemical reaction that releases heat and light, especially the burning of a combustible substance in the presence of oxygen. - A Fire A class B fire extinguisher fights fires from - oil A written statement issued by the commissioner certifying that the person to whom it is issued has passed an examination as to his or her qualifications or is otherwise deemed qualified to use or supervise the storage, handling and use of a material - Certificate of Fitness What type of fire is a Class A fire extinguisher used on? - cardboard An example of a flammable material would be - kerosene Fire extinguishers must be maintained by a W-96 Certificate of Fitness holder every - year A type D fire involves - Combustible Metals A type of clothing that should not be worn when performing torch operations is - Frayed Clothing. A flame going out unexpectedly and creating a popping sound is known as - Backfire. When a cutting or welding flame burns inside a torch is known as - Flashback. To check for a leak one should - Use a soap and water solution. A fire extinguisher must be mounted - so that the top is not more than 5 feet off the floor A work area should be - Well ventilated. To extinguish a fire - Always approach the fire from upwind. How should a gas cylinder be stored? - Upright and not on shelves. In the case of any fire, - The FDNY must be notified. Acetylene valves should not be opened more than - 1 1/2 turns "SCF" stands for - Standard Cubic Feet A Certificate of Fitness Holder must keep his or her certificate - On their person. A Citywide permit is valid for up to - 30 Days A hot work permit is required for - Welding. A spark producing tool - Requires a Fire Guard. To prevent injury hoses should be - As short as practical. The oxygen cylinder - is made of steel and contains 100% oxygen. A compressed gas container must - Not be rolled on its side. An area exposed to sparks, hot slag, radiant heat, or convective heat as a result of welding is called a - Hot work area. Fuel gas or oxygen containers in storage must be separated from any combustible materials by a minimum distance of - 20 feet. Most fires are the result of - Sparks. Sparks and pieces of hot metal are the source of ignition in about______ of fires in industrial occupancies. - 60. Under no circumstances can hot work be performed within _____ feet of flammable or explosive materials. - 35. If torch operation is to be discontinued for a period of ___________, the torch valve must be closed and the gas supply to the torch must be completely shut. - One hour or more. A torch should be ignited by using a - Friction device. Why should oil or grease not be used near oxygen? - It might cause an explosion. How long is a site permanent specific permit to store flammable gases valid for? - 30 days How many Fire Guards are required on a job site that has 3 torches in operation? - One per torch and additional one stationed on the floor below. Portable LPG containers greater than ______ must not be stored in residential occupancies. - 16.4 oz. An oxygen cylinder may store gas at pressure up to - 2200 psi. A Responsible Person is one who is - trained in the fire safety hazards associated with hot work, and in the necessary and appropriate measures to minimize those hazards, who is designated by the owner of a premises to authorize the performance of hot work at the premises. A designated Hot Work area must be at least_______ feet away from combustible materials. - 35. For all Hot Work, inspections must be completed_______ after completion of torch operations. - 30 minutes.