FLORIDA FIRE STATE EXAM Questions With 100% Verified Answers Latest Update 2024 ., Exams of Safety and Fire Engineering

Download FLORIDA FIRE STATE EXAM Questions With 100% Verified Answers Latest Update 2024 . and more Exams Safety and Fire Engineering in PDF only on Docsity!

FLORIDA FIRE STATE EXAM Questions

With 100% Verified Answers Latest

Update 2024

What is one way that fire service ladders are different from ladders for private industry or general use? Fire service ladders provide a greater margin of safety (pg.654) NFPA 1931 requires that single, roof combination and extension ladders must support a maximum load of: 750 lbs (pg.655) NFPA 1932 contains requirements for: Ladder use, care, maintenance, and service testing (pg.655) The lowest, widest section of a extension ladder is called: Bed section (pg.655) Which of the following BEST describes the butt of a ladder? The bottom end of the ladder (pg.657) Which of the following best describes a halyard?

Rope of cable used for hoisting and lowering fly sections on a ladder (pg. 657) What is the term for the cross members that extend from one beam to the other and provide a foothold for climbing? Rungs (pg.657) What is the MOST common material used for fire service ladders? Aluminum (pg. 658) Ladders made of conduct heat, cold, and electricity, and may accumulate ice on the rungs in cold weather. Aluminum (pg. 658) Which of the following statements BEST describes wood ladders? Wood ladders offer better resistance to flexing and bouncing when being climbed (pg. 658) Which of the following statements about ladder materials is MOST accurate? Fiberglass ladders can suddenly crack and fail of overloaded (pg. 658) NFPA 1931 requires which of the following markings on the fire service ladders? Manufacturer's name plate (pg. 659)

Fire service ladders meeting the requirements of NFPA 1931 are required to have: A certification label indicating the ladder meets NFPA 1931 standards (pg. 659) Which of the following statements about heat sensor labels is MOST accurate? Heat sensors are preset to change color at 300 degrees F (pg. 659) Which of the following BEST describes a single of straight ladder? One section, fixed length, used for quick access to roofs and windows one-and-two story buildings (pg.

Which of the following BEST describes an advantage of trussed ladder design? Maximizes strength while reducing weight (pg. 660) Which of the following statements BEST describes roof ladders? Single ladders equipped with hooks that anchor the ladder in place while a firefighter is working (pg.

Which type of ladder has hinged rungs that allow the ladder to be folded so that one beam rests against the other, allowing it to be carried in narrow passageways? Folding ladder (pg. 661) Which of the following BEST describes and extension ladder? Comprised of a base section and one or more fly sections, can be adjusted to specific length needed (pg.

Which type of ladder is designed to be used as a self-supporting stepladder and as a single or extension ladder? Combination ladder (pg. 661) Pumper apparatus are required by NFPA 1901 to carry one folding ladder, one roof ladder, and: One extension ladder (pg. 661) NFPA 1901 requires quint fire apparatus to carry a minimum of of ground ladders of the same types required for pumper apparatus. 85 feet (pg. 663) Which of the following statements about inspecting ladder elements is MOST accurate? Discoloration of fiberglass ladders could indicate heat exposure (pg. 663) Which of the following statements about ladder inspection is MOST accurate? Ladders that cannot be repaired must be destroyed or scrapped for parts (pg. 663) Ground ladders should be service tested before being placed in service, while in service, and after use that exposes the ladder to high heat or rough treatment. Once each year (pg. 665) Which of the following is the BEST way to clean a fire service ground ladder?

Wash with a sof t bristle brushed running watered mild soaps of needed (pg. 666) Which of the following statements about ladder maintenance is MOST accurate? Routine ladder maintenance may be performed by firefighters (pg. 666) Which of the following BEST illustrates a safety guideline for handling ladders? Firefighters should wear a full body harness and safety line when training on ladders (pg. 666) Which of the following statements about handling ladders is MOST accurate? A firefighter should relocate a positioned ladder only when ordered to do so (pg. 667) Factors to consider when deciding where to place a ladder include: The structural features of the building (pg. 668) Which of the following BEST describes the two means of escape required when personnel are working on a roofer upper story? At least two ladders at remote locations from one another (pg. 668) When selecting a ladder to access a specific point, which of the following is MOST accurate regarding estimated distances and ladder reach? A commercial story averages 12ft (pg. 668)

Which of the following statements provides the BEST guideline for lifting and lowering ladders? Use the correct number of firefighters for the length and type of ladder to be lifted and lowered (pg.

Where may ladders be mounted on aerial or quint apparatus? Vertically, on the left or right side of the apparatus bed (pg. 671) When performing a two firefighter low-shoulder carry, where should the forward firefighter's free hand be placed? Over the upper butt spur (pg. 672) When three firefighters carry a ladder, how should they be positioned? One firefighter at each end on one side of the ladder, then third on the other side in the middle (pg. 673) Which of the following BEST describes the way to carry a roof ladder when using an extension ladder to access the roof? Climb the extension ladder, shoulder the roof ladder 3 - 4 rungs from the tip, and carry the rest of the way to deploy on the roof pitch (pg. 674 - 675) Which of the following describes the BEST placement of a ladder to be used for entry or rescue from a window? Ladder tip slightly below sill lip (pg. 676) Which of the following statements about ladder placement is MOST accurate?

Ladders should be placed to the side of openings including doors, and paths of travel (pg. 677) Which of the following statements about ladder placement is MOST accurate? An easy way to determine the proper distance between the butt and the building is to divide the working length of a ladder by four (pg. 677) Which of the following must be done before raising a ladder? Check for overhead wires or electrical equipment (pg. 678) The Occupational Health and Safety Administration (OSHA) requires ladders to be kept a distance at least 10 feet from: Electrical lines (pg. 678) How should the fly section be positioned in relation to the structure on an extension ladder? Most metal and fiberglass ladders are designed to be used with the fly out, away from the structure (pg.

Which of the following statements about tying the extension ladder halyard is MOST accurate? The halyard should be tied to prevent the fly from slipping (pg. 679) Which of the following statements about ladder raises is MOST accurate? Ladders may be raised parallel to the building and be pivoted after they are in vertical position (pg. 680)

Which of the following is the BEST way to position a ladder that has been flat-raised parallel to the building? Pivot the ladder 90 degrees on the beam closest to the building (pg. 683) Which of the following BEST describes a situation where a raised ground ladder may be shifted? The ladder needs to be moved a short distance to align with a window (pg. 683) Heeling and tying in are two methods of: Preventing movement of the ladder away from the building (pg. 684) Which of the following BEST describes the method used by a firefighter heeling from there outside ladder? Chock butt end with one foot, grasp beams, and press ladder against building (pg. 684 - 685) Which of the following statements about tying in is MOST accurate? Tying in frees personnel who would otherwise be holding the ladder in place (pg. 685) Which of the following describes the BEST technique for ascending a ladder with the least amount of bounce and sway? Climb smoothly and rhythmically (pg. 685) Which of the following statements about ladder climbing position is the MOST accurate? Keep arms straight (horizontal) during the climb (pg. 685)

To move a tool to a roof or upper floor during an emergency operation, a firefighter should: Carry the tool with one hand, slide the free hand under the ladder beam (pg. 686) What is the function of a ladder belt? Safely secure firefighter to a ladder while performing work (pg. 686) Which of the following BEST describes a way to secure a firefighter to a ladder while performing work? Leg lock (pg. 686 - 687) Which of the following statements about assisting a victim down a ladder is the MOST accurate? Victims must be protected from slipping and falling when climbing down a ladder (pg. 687) Which of the following BEST describes a method for supporting the weight of an unconscious victim? Victim's body rests on rescuers supporting knee (pg. 687) Which of the following statements about removing large victims is MOST accurate? Large victims are lowered by two rescuers on ladders placed side by side (pg. 688) Which of the following describes one way fire service ladders differ from ladders for private industry or general use? Fire service ladders are capable of supporting heavier loads (pg. 654)

NFPA 1931 contains requirements for: Ladder design, construction, and testing specifications (pg. 654) Which of the following components is the main structural member of a ladder, supporting the rungs and rung blocks? Beam (pg. 655) Which of the following BEST describes the tip of a ladder? The extreme top of the ladder (pg. 657) The upper section of an extension ladder is called the: Fly section (pg. 657) The curved metal devices near the top end of a roof ladder? Hooks (pg. 657) Which of the following statements about aluminum ladders is MOST accurate? Aluminum ladders are not heat-resistant (pg. 658) Which of the following is an advantage of wood ladders? Wood ladders retain strength when exposed to heat (pg. 658)

Which of the following is a ladder marking required by NFPA 1931? Designed ladder length on each beam (pg. 659) The ladder positioning label indicates the proper climbing angle and: The side of the ladder that must be away from the building (pg. 659) Which of the following statements about heat sensor labels is MOST accurate? Heat sensors labels are required on metal and fiberglass ladders (pg. 659) Which of the following ladder types is a one-section, non adjustable ladder with a fixed length? Single (pg. 660) Which ladder design type maximizes strength while reducing weight? Trussed (pg. 660) Which type of ladder is typically used to gain access, distribute a firefighter's weight, and prevent slipping while working? Roof ladder (pg. 661) A combination ladder is: Designed to be used as a self-supporting stepladder and as a single or extension ladder (pg. 661)

NFPA 1901 requires pumper apparatus to carry one roof ladder, one extension ladder, and: One folding ladder (pg. 661) NFPA 1901 recommends engines carry a (an) in areas where there are no ladder trucks in service. 35 foot extension ladder (pg. 661) Which of the following statements about inspecting ladders is MOST accurate? Ladder beams and rungs should be inspected for cracks, splintering breaks, gouges, checks, wavy patterns, and deformation. (pg. 663) The halyard, pawl assemblies, and ladder guides should be examined when inspecting: An extension ladder (pg. 665) Which of the following statements about inspecting ladders is MOST accurate? Ladders should be removed from service id discrepencies are found during inspection (pg. 665) Ladders should be cleaned: With a soft bristle brush, running water, and mild soap (pg. 666) Which of the following statements about maintaining ladders is MOST accurate? Ladders needing repair require the service of a trained ladder repair technician (pg. 666)

Which of the following statements about ladder safety is MOST accurate? When training on ladders, firefighters, should wear full body harness with a safety line (pg. 666) When should a firefighter relocate a positioned ladder? When ordered to do so (pg. 667) Which of the following BEST describes a factor to consider when deciding where to place a ladder? Topography of the area (pg. 668) When using an extension ladder to access a roof, the ladder should be extended to place the tip: Three to five rings beyond the roof edge (pg. 668) Which of the following statements about ladder reach is MOST accurate? For lengths of 35 feet for less, reach is approximately one foot less than designated length (pg. 669) To prevent personal injury when lowering a ladder, firefighters should: Keep feet parralel to the ladder to avoid ladder resting on their toes (pg. 670) Which of the following statements about removing ladders from an apparatus is MOST accurate? Ground ladders carried pumper apparatus are typically mounted in compartments or on racks on the right side of apparatus (pg. 670 - 671)

Which of the following statements about ladder carries is MOST accurate? The two-firefighter arms' length on-edge carry is best performed with lightweight ladders (pg. 674) When carrying a roof ladder up an extension ladder to access a roof, a firefighter should: Climb the extension ladder, shoulder the roof ladder 3 - 4 rungs from the tip and carry the rest of the way to deploy on the roof pitch (pg. 675) Which of the following BEST describes the firefighter who decides the exact spot to place the butt of the ladder? The firefighter nearest the butt of the ladder (pg. 675) A ladder to be used for is positioned alongside a window on the windward side with the tip about even with the top edge of the window Positioning a firefighter to break the window for ventilation (pg. 675) Which of the following statements about ground ladder placement is MOST accurate? Avoid placing ladders over openings, such as windows and doors, where the ladder may be exposed to heat or direct flame contact (pg. 676) If the ladder butt is placed too close to the building, which of the following is MOST likely to be true? The weight of a person climbing the ladder tends to cause the tip of the ladder to pull away from the building (pg. 677)

Which of the following statements about raising ladders is MOST accurate? The transition from carrying position to raise can and should be done in one smooth, continuous motion (pg. 678) The Occupational Health and Safety Administration (OSHA) requires ladders must be kept a distance of from all energized electrical lines and equipment. 10 feet (pg. 678) The correct position of the fly on a extension ladder is: specified by the manufacturer (pg. 679) After raising an extension ladder, the halyard should be tied: Using a close hitch and overhand safety (pg. 679) How should a single firefighter heel the ladder when performing a one-firefighter extension ladder raise? Against the building (pg. 680) Which of the following statements about raising ladders is the MOST accurate? The firefighter at the butt is responsible for determining whether the ladder will be raised parallel or perpendicular to the building (pg. 681) Which of the following statements about moving ground ladders is MOST accurate? Two firefighters are required to shifting extension ladder (pg. 683)