Florida LP Master Qualifier| Questions and Answers, 100% Correct| Latest 2024-2025, Exams of Community Corrections

Download Florida LP Master Qualifier| Questions and Answers, 100% Correct| Latest 2024-2025 and more Exams Community Corrections in PDF only on Docsity!

Florida LP Master Qualifier| Questions and Answers, 100%

Correct| Latest 2024- 2025

When must a dispensing unit have a License to operate in the state of Florida? - When selling to the public What are the insurance requirements for dispensing units in Florida? - 1 Mil Cat 2 Ins Have a qualifier What kind of accident must be reported - Cause of death or medical care Property damage more than 1000 When must accidents be reported - Cause of death or professional medical care Who regulates the sales of LP gas in Florida - Bureau of Agriculture What is a qualifier? - Someone who has passed the Florida LP Test Who is allowed to dispense LP gas in Florida? - Lic Qualifier Who is responciable for the safe operation of your dispensing unit? - Owner Who is allowed by law to repair leaks and replace parts in your dispensing unit? - Licensed qualified company

What penalties may be levied by the bureau of LP Gas Inspection for violations of Florida LP Laws? - Felony Class 3 Name three characteristics of Propane? - Odorless Colorless Hydrocarbons What is the boiling point at 14.7 PSI? - - 44 One gallon of Propane? - 4.20 pounds LP is ______ heavier than AIR? - 1. LP is ______ compared to water? -. What is the flammability of propane? - 2. 15 - 9. What is the odorant added to propane? - Ethal-mercaptan When liquid Propane is released to the atmosphere, what is the expansion ratio? - 270 Is propane toxic? - yes Name three potential sources of ignition? - Fans Electrical switch Auto ignitions

Static electricity Cigarettes When the outside temperature increases, what happens to propane inside a container? - Expands Name three types of specification which propane containers are manufactures under. - DOT ASME FAA What does ASME and DOT mean? - American Society of Mechanical Engineers Department of Transportation How long after manufacture may a DOT steel or Aluminum cylinders be recertified? - 10 years (12 years) How long after manufacture may an AMME propane container be used before it needs to be recertified? - Never How long after manufacture, may a DOT cylinder be used before recertification? - Tested every 5 years Only good for 15 years No recert ever Where is the identifications information found on a DOT cylinder and an ASME? - DOT: Collar Data plate If an ASME container does not have a Data Plate, but appears in good condition, can it be filled? - No

Can a Licensed dispensing unit operator re-qualify DOT cylinders for continued use? - Yes, Visual (E) Name three types of re-qualification that can determine if a DOT cyclinder is acceptable for safe continued use - Visual Hydrostatics Water Jacket The cylinder marking 4BW- 240 - 4BW= 12 years recert 240= PSIG (pounds per square inch) How does a back flow check valve work? - Remains closed until outside pressure open to fil What is the purpose of a relief valve? - Opens when the pressure increases higher than the allowed pressure. What information does a fixed liquid level gauge give you? - Communicate he vapor space of the container 80% fill What does the excess flow in a liquid service valve do? - Permits the flow in either direction but closes automatically when the outward gas flow exceeds a safe rate What should a vapor service valve (POL) be equipped with when disconnected? - A cap or plugged What is an OPD and what is its purpose? - Over - Representation - Devise

Designed to cut off when fill level is achieved Can you rely on an OPD valve for accurate filling of a DOT cylinder? - No, they are there to help Is the float gauge alone a suitable method for filling? - No What must be done before a new DOT container can be filled? - Purged Check dates Check Tare