GC 120 FINAL EXAM (LATEST) 2024/2025 QUESTIONS WITH COMPLETE SOLUTIONS!!, Exams of Art

Download GC 120 FINAL EXAM (LATEST) 2024/2025 QUESTIONS WITH COMPLETE SOLUTIONS!! and more Exams Art in PDF only on Docsity! GC 120 FINAL EXAM (LATEST) 2024/2025 QUESTIONS WITH COMPLETE SOLUTIONS!! Parentheses A reference dimension on a drawing should be identified by: A) REF B) TYP C) Parentheses D) An asterisk 10 mm What is the recommended minimum distance (X) that dimensions should be placed from a view? A) 6 mm B) 10 mm C) 15 mm D) 20 mm Brainpower Read More 6-10mm When dimensions are stacked, what is the recommended distance (Y) between dimensions? A) 1-3mm B) 3-5mm C) 6-10mm D) 10-15mm A Identify the correct method for dimensioning a cylinder. Extension Line Item 1 in the figure below is a(n): A) Hidden line B) Leader line C) Extension line D) Dimension line Leader Line Item 2 in the figure below is a(n): A) Hidden line B) Leader line TRUE OR FALSE: in order to bring multiple instances of a part into an assembly, i would need to make multiple copies of the part file. bottom-up assembly the type of assembly design that requires design intent and part geometry to be defined before it is brought into an assembly environment is a(n): A) in context assembly B)top-down assembly C) hierarchical assembly D) bottom-up assembly six degrees of freedom when a fully free, or unconstrained, 3D part file is merged into an assembly model it will have A) six degrees of freedom B) two degrees of freedom C) zero degrees of freedom D) three degrees of freedom components in building an assembly model, individual part files that are brought into the assembly are called A) sub files B) mates C) components D) instances False TRUE OR FALSE: A 3D solid part whose geometry must be fully defined before it is merged into an assembly model is an example of top-down modeling True TRUE OR FALSE: in an assembly model, a component can be either a single part file or a sub-assembly file consisting of its own components False TRUE OR FALSE: it is not possible to use constructing geometry in a 3D assembly model ASME Y14.5-2018 what is the name and date of the current american standard for dimensioning and tolerancing? A)ASME Y14.5-2009 B)ASME Y14.5-2018 C)ASME Y14.5M-1994 D)ISO 9001 do not show leading zeros for values less than 1 unit the following is true regarding standards for inches units A)show leading zeros for values less than 1 unit B)show trailing zeros equal to the accuracy of the drawing C)do not show trailing zeros D)do not show leading zeros for values less than 1 unit unidirectional the current standard that specifies that dimensions should be read from the bottom of the page is ________ dimensioning. A)aligned B)bidirectional C)unidirectional D)unilateral True True or False driving dimensions define to 2d sketch geometry and 3d features along with geometric constraints tabular Standard parts such as nuts and bolts from a hardware store would use _________ dimensioning. A) rectangular coordinate B) tabular C) aligned D) baseline ASME Y14.5-2018 What is the name and date of the current American standard for Dimensioning and Tolerancing? A) ASME Y14.5-2009 B) ASME Y14.5-2018 C) ASME Y14.5M-1994 D) ISO 9001 TRUE TRUE OR FALSE: The offset constraint modifier is used to vary the spacing between components in a 3D assembly model detail drawing what type of drawing includes information to describe a part's shape, size, material and finish? A) Assembly drawing B) Detail drawing C) Exploded assembly drawing D) sub-assembly drawing detail drawing, assembly and/ or subassembly drawings, a bill of materials, and a standard titleblock. a complete set of working drawing for a design typically includes: A) 3D models of the objects, 2D drawing of each part, and a 3D model of the assembly B) detail drawing, assembly and/ or subassembly drawings, a bill of materials, and a standard C) Sectioned drawing D) Tabular drawing sectioned assembly drawing What type of drawing is shown below? A) detail drawing B) outline assembly drawing C) pictorial assembly drawing D) sectioned assembly drawing detail drawing What type of drawing is shown below? A) detail drawing B) final assembly drawing C) outline assembly drawing D) sectioned assembly drawing WHEEL which part in the assembly below is made of cast iron? A) .625 SOC HD SHD SCREW B) BASE C) SUPPORT D) WHEEL exploded assembly drawing what type of drawing is shown below? A) Exploded assembly drawing B) outline assembly drawing C) sectioned assembly drawing D) sub-assembly drawing .500 if you were told to modify the dimension in "zone b-1" in the drawing below, which dimension would you modify? A) .125 B) .500 C) 2.500 D) 7.339 true shape of a curved surface All of the following are uses for auxiliary views EXCEPT finding the: A) Edge view of a plane. B) true length of a line C) true measurement of a dihedral angle D) true shape of a curved surface A identify the correct complete auxiliary view A B C D primary Which type of auxiliary view is projected directly from one of the six principal views? A) Primary B) Secondary C) Tertiary D) None of the above interior features the primary function of a sectional view is to reveal A) exterior features B) inclined features C) interior features D) profile features section lines offset section what type of sectional view is shown below? A) aligned section B) half section C) offset section D) removed section aligned section what type of sectional view is shown below? A) aligned section B) half section C) offset section D) removed section Alternative position to create drawing view "B" it is necessary to select drawing view "A" and insert which solid works view type? A) Multiple Configurations Position B) Custom position C) Angle position D) alternative position cropped this is an example of which CAD view type? A) Detail B) Cropped C) Broken-Out section D) Section Partial section this is an example of which view type? A) Detail B) full section C) Broken-Out section D) Partial Section primary which type of auxiliary view is projected directly from one of the six principal views? A) Primary B) Secondary C) Tertiary D) None of the above secondary Which type of auxiliary view is used to project the true size and shape of an oblique surface? A) primary B) secondary C) tertiary D) none of the above height what type of auxiliary view is generated from an edge view of an inclined surface in the top view? A) depth B) hight C) secondary D) width true shape of a curved surface all of the following are uses for auxiliary views except finding the: A) edge view of a plane B) true length of a line C) true measurement of a dihedral angle D) true shape of a curved surface width what type of auxiliary view is generated from an edge view of an inclined surface in the profile view? A) depth B) height C) secondary D) width c identify the correct auxiliary view A) B) C) D) C) ergonomics analysis D) all of the choices are correct False TRUE OR FALSE: Augmented reality tools are immersive, digital environments used for the design review of products. False A 2D drawing is more accurate than a 3D model for programming a machine tool. STL files which of the following data formats is used to drive rapid prototyping? A) PRT files B) IGES files C) STEP files D) STL files true TRUE OR FALSE: Kinematics, mass properties analysis, and finite element analysis are all techniques that leverage the 3D model for evaluating the digital product model. ALL OF THE CHOICES ARE CORRECT Which of the following is an application of 3D model data? A) Additive Manufacturing B) Kinematics C) All of the choices are correct D) Ergonomics Analysis FALSE TRUE OR FALSE: A 3D drawing is more accurate than a 3D model for programming a machine tool. Models provide an unambiguous, accurate form of communications for making parts Which of the following statements is most accurate regarding the use of models in supply chain and maintenance communications? A) Service engineers cannot access design model information to help with repairs B) models are easier to archive than drawings C) sales people cannot access model data to communicate with customers D) models provide an unambiguous, accurate form of communications for making parts TRUE TRUE OR FALSE: 3D models form the basis of technical documentation within the digital enterprise Combined with CAD can help ensure manufacturability Which of the following statements are true regarding computer aided manufacturing (CAM)? A) Is the programming language used for CNC machining B) primarily is used to produce 3D models C) combined with CAD can help ensure manufacturability D) produces photo realistic images of virtual models TRUE TRUE OR FALSE: 3D part models are used to communicate between OEMs and suppliers instead of 3D drawings laser engraving Which of the following types is an example of subtractive manufacturing? A) selective leaser sintering B) fused deposition modeling C) laser engraving D) virtual reality FALSE true or false: augmented reality tools are immersive, digital environments used for the design review of products