JLTV Test B QUESTIONS WITH COMPLETE 100% VERIFIED SOLUTIONS 2024, Exams of Business Administration

Download JLTV Test B QUESTIONS WITH COMPLETE 100% VERIFIED SOLUTIONS 2024 and more Exams Business Administration in PDF only on Docsity! JLTV Test B QUESTIONS WITH COMPLETE 100% VERIFIED SOLUTIONS 2024 Which is the only JLTV variant with a two-seat configuration? A. GP B. HGC C. CCWC D. UTL D. UTL Which of the following lights indicates that you will NOT be able to adjust the ride height? A. LVD B. SPNSN ERROR C. SPNS NOT LEVEL D. CTIS FAULT B. SPNSN ERROR What are the benefits of the vehicle design using half shafts instead of straight axles on the JLTV? A. To account for angles produced by suspension movement. B. To ensure that both wheels respond as one while driving off-road C. Because straight axles cannot be driven off road D. To allow for the transmission of energy from the differential to the transaxle A. To account for angles produced by suspension movement. Using the pictures below, label the parts Forting Stacks Pre-Cleaner List the four Central Tire Inflation System (CTS) terrain settings HWY, CC, MSS, EMER Explain why the MUX panel switches need to be pressed and held for at least one second Prevents inadvertent bumps or taps from changing the lighting settings What does the DSDU monitor that signals it to turn on/off automatically? A. Engine sensors (when engine gets power) B. VEH BATT switch (when batteries are engaged) C. When vehicle starts engine turned over D. Ignition switch turned to ON D. Ignition switch turned to ON List three benefits the DSDU provides to the driver Possible answers include: It provides maintenance levels (like fluids, pressure and temperature) without having to look under the hood. It shows real time pitch and roll. It shows the status of the suspension level and allows the driver to adjust the suspension. Allows the CTIS options It displays real time data about the circuit breaker. It displays the status of critical vehicle systems. Match the JLTV controls with the callouts on the dashboard shown below. DSDU C HVAC controls F Parking brake A Systems Control MUX panel B Trailer Air Supply D Transmission Shift Selector E Which of the following is NOT part of JLTV Basic Issue Items (BIl)? A. Suspension lockout braces B. Tow bar C. Wheel chocks D. Hydraulic jack adaptor B. Tow bar When inventorying your BII, which of the following codes is NOT used to annotate the form? A. S-ServIceable B. P-Present C. M-Missing D. U-Unserviceable B. P-Present What is the combined rating of using a snatch block with the winch? A. 18,500 lbs. B. 22,500 lbs. C. 37.000 Ibs. D. 50.000 Ibs. C. 37,000 Ibs. List three post-check items vou inspect after driving the JLTV. Possible Answers: Lights and reflectors, safety devices, air tanks, fluids, cleanliness Your JLTV is mired up to fender depth. Your JLT is equipped with a complete winch kit. Using the snatch block and an anchor, can you successfully perform a self-recovery on your JLTV? A. Yes B. No B. No Which of the following conditions constitutes a Mire level 3? A. A JLTV mired up to the center of the wheels B. A JLTV mired with the top of the wheels at ground level C. A JLTV mired at the top of the fender D. A JLTV mired to the level of the hood D. A JLTV mired to the level of the hood Why is it important to attach the recovery chain near the ground when using a tree or stump as an anchor? A. So that you won't have to reach up very high to secure the winch shackle. B. Because the winch pulls better when pulling at an angle. C. Because the base is usually the strongest part of the tree or stump. D. It is easier on the winch motor. C. Because the base is usually the strongest part of the tree or stump. When operating the JLTV winch, why is it important to "cycle" the winch motor? A. Cycling the winch motor prevents the motor from overheating. B. During vehicle recovery, do NOT cycle the winch motor to avoid backsliding. C. The jerking motion of cycling the motor makes it easier to recover a mired vehicle D. Cycling the winch motor allows the mud or sand around the tires to loosen up, allowing for an easier recovery. A. Cycling the winch motor prevents the motor from overheating. Using the image below, circle the solenoid switches you have to disengage for a flat-tow. Disengage T2, T3 and R1, which are the 2nd, 3rd and 4th valves on the bank. The two types of air lines used for flat towing include the emergency air lines and the ______ airlines Answer: service Which line lock setting MUST be activated manually? A. Line Lock O B. Line Lock 1 C. Line Lock 2 D. Line Lock 3 D. Line Lock 3 What speed is the JLTV limited to in the default configuration for the MSS CTIS setting, before the vehicle automatically bumps to the next CTIS setting? A. 10 mph B. 20 mph C. 45 moh D. 76 mph B. 20 mph Operating in mud can seriously degrade the JLTV's performance when: A. Mud packs into system components such as universal joints, steering mechanisms, and radiator, which can harden and prevent normal operation. B. Driver does not clean the vehicle after traveling through mud C. It causes wear in the brake pads. D. All of the above D. All of the above Which CTIS setting would you use to operate in loose sandy terrain? A. HWY B. CC C. MSS D. EMER C. MSS What is the default Line Lock (LL) programmed to engage when MSS is selected on the CTIS screen? A. No locks are automatically engaged in MSS. B. LL 1 C. LL2 D. LL3 C. LL2 When operating in muddy terrain, failure to maintain _______ can result, causing JLTV to get mired in the mud. A. Traction B. Tire pressure C. Momentum D. Slippage C. Momentum Provide the standard JLTV vehicle configuration for operating in soft sand/dessert/beach-like sand on flat slightly rolling terrain: A. Transaxle Range: HIGH B. CTIS: MSS C. Line Lock: Leave it at LL2 (default with MSS) unless LL3 is needed A. Transaxle Range: HIGH B. CTIS: MSS C. Line Lock: Leave it at LL2 (default with MSS) unless LL3 is needed If you have no traction, you have no A. Tractive force B. Tractive limit C. Forward motion D. Torque C. Forward motion The inclinometer displays you are driving on a 15° side slope when your downhill tires sink into softerdirt than vour uphill tires. What is the immediate effect on the vehicle? A. The slope angle is decreased making rollover less likely. B. The slope angle is decreased making rollover more likely. C. The slope angle is increased making rollover less likely. D. The slope angle is increased making rollover more likely. D. The slope angle is increased making rollover more likely. What Line Lock setting will you be in when ascending approximately a 60% (30°) grade? A. O B. 1 C. 2 D. 3 D. 3 Which of the following does NOT need to be configured before maneuvering over obstacles? A. CTIS B. Transaxle C. Suspension D. SAES D. SAES Wheel slippage can damage the A. CTIS programs B. Gearing and differentials