MSSC Safety Exam 2024/2025 with 100% Accurate Solutions, Exams of Nursing

Download MSSC Safety Exam 2024/2025 with 100% Accurate Solutions and more Exams Nursing in PDF only on Docsity!

MSSC SAFETY EXAM 2024/2025WITH 100%

ACCURATE SOLUTIONS

The first stage in a team development process is an awkward stage for the team members called __________.

• storming
• norming
• performing
• forming - Answer ✔✔forming Product designers should always consider the effects of tooling design and cost during __________.
• Prototype development
• Process capability studies
• Team kickoff meetings
• Maintenance of a machine - Answer ✔✔Prototype development Supervisors should set measurable objectives to __________.
• eliminate the need to review employees
• limit the number of employees who can receive a bonus
• have good performance criteria for review of employee performance
• have a way to collect data to satisfy management reports - Answer ✔✔have good performance criteria for review of employee performance

Engineers working with manufacturing to become aware of tooling limitations and other problems that may increase production time and cost is an example of __________.

• brainstorming
• product analysis
• concurrent engineering
• production processing - Answer ✔✔concurrent engineering In a team, the __________ is one who will stimulate or guide the group to think of ideas.
• facilitator
• recorder
• president
• supervisor - Answer ✔✔facilitator Vendors could be considered what type of customer?
• main
• substantial
• internal
• external - Answer ✔✔external When a team is formed to tackle a problem, a __________.
• supervisor is placed in charge

• set of guidelines is supplied to guide decisions
• team kickoff meeting is held to get everyone up to speed on the task and meet each other
• cost evaluation is performed to justify their work - Answer ✔✔team kickoff meeting is held to get everyone up to speed on the task and meet each other __________ is a design methodology that designs features into the product that make it cheaper to manufacture while maintaining its ability to perform its intended function.
• Design for Manufacturing and Assembly (DFMA)
• Design Criteria and Performance (DCP)
• Design, Manufacture, Deliver (DMD)
• Design for Production and Performance (DPP) - Answer ✔✔DFMA When a team sets objectives that they wish to accomplish, care should be taken to ensure that these objectives are __________.
• aggressive
• predictable
• measurable
• justifiable - Answer ✔✔measurable An organizational method for the production areas that groups together all the machines that are needed to produce a part or a group of parts is called __________ manufacturing.

• traditional
• cellular
• pod
• flow - Answer ✔✔cellular __________ to enable team leaders on other projects to identify availability of potential team members.
• Guarantee of long term work for team members
• Planned release of personnel as the project comes to an end
• Record of underperforming team members
• Planned transfer of unused funds to other teams - Answer ✔✔Planned release of personnel as the project comes to an end An employee will receive an update to their training record to reflect their certification when __________.
• Forklift training is completed
• Forklift training is started
• New employee training is completed
• Packaging training is completed - Answer ✔✔Forklift training is complete In manufacturing, changes to processes, equipment and people are the largest drivers of __________.
• Workplace behavior policy
• Training

• Fire safety regulations
• Team-based work - Answer ✔✔Training Documentation on the quality of a training session __________.
• is recorded if the trainee receives payment
• is required
• is not required
• determines who attends - Answer ✔✔is not required Communications skills used by team members should include __________, oral communication, written comprehension, and listening skills.
• written communication
• brainstorming
• indirect communication
• direct communication - Answer ✔✔written communication Human caused emergencies may be broken down further into two sub- categories __________ and accidental.
• intentional
• Carelessness
• threatening
• hostile - Answer ✔✔hostile

Supervisors and/or safety committees should be made aware of __________.

• cost overruns
• only items that do not get people in trouble
• possible improvements in ergonomics
• unclean areas - Answer ✔✔possible improvements in ergonomics An assessment of safety and environmental compliance is required when __________.
• making repairs
• installing new equipment
• hiring contractors
• packaging equipment for shipment - Answer ✔✔installing new equipment A walk-through safety inspection is performed by the company's __________.
• safety officer
• Safety Committee
• Floor Supervisor
• OSHA Inspector - Answer ✔✔Safety Committee Which of the following should be done when a new or different machine is installed?
• a lockout/tagout

• a job safety analysis
• an environmental test
• an SDS report - Answer ✔✔a job safety analysis A safety team may decide a safety audit is required when __________.
• An accident occurs involving an oil spill
• OSHA is planning a visit
• the team's budget is being considered for reduction
• a new person is hired - Answer ✔✔An accident involving an oil spill The __________ should be informed if one of the contractors is creating or operating in an unsafe condition.
• company president
• safety officer
• company security
• project manager - Answer ✔✔product manager Anyone who notices another employee engaging in an unsafe practice should __________.
• Send an anonymous letter to the supervisor.
• Report the incident to the safety committee.
• Give constructive input to the employee to encourage good safety practice - Answer ✔✔Give constructive input to the employee to encourage good safety practice

__________ are commonly made from leather and designed to go over a welder's pants to protect their legs from molten metal or sparks.

• Coveralls
• Sleeves
• Chaps
• Pant guards - Answer ✔✔Chaps Working around live electrical circuits requires a worker to wear gloves approved by __________.
• ASTM
• OSHA
• FDA
• DOT - Answer ✔✔ASTM When working in areas that have extreme respiratory conditions, such as a confined space with toxic fumes, a __________ should be used.
• HEPA filter
• disposable mask
• Self-contained breathing apparatus
• Full mask - Answer ✔✔Self-contained breathing apparatus A certification from a physician is required before __________.
• Using air breathing apparatus

• Working out on a treadmill at the company fitness center

• Operating a conveyor

• Working in confined spaces - Answer ✔✔Using air breathing apparatus OSHA has set the permissible noise level at __________ decibels for an eight-hour period. - Answer ✔✔ 90 __________ respirators purify the air by filtering the air to reduce the concentration of substances such as dusts, mists and fumes.

• Particulate removing

• Vapor/Gas Removing

• Atmosphere-supplying

• Self-contained - Answer ✔✔Particle removing A __________ respirator only covers the nose and mouth of the user.

• quarter-mask

• half-mask

• full-mask

• hood - Answer ✔✔quarter mask OSHA defines air as oxygen-deficient if it contains less than __________ percent oxygen.

• 19.5 - Answer ✔✔19. o check for leaks on a half-mask respirator when inhaling, cover the __________ with the palms of your hands.

• exhalation port

• cartridges

• directional valve

• sides of the mask - Answer ✔✔cartridges A paper fire can be safely extinguished using a Class __________ fire extinguisher.

• A

• B

• C

• D - Answer ✔✔A Class C Fire - Answer ✔✔Electrical An effective way to kill any potential blood borne pathogen is to __________.

• clean the blood spill with a 10% solution of bleach and water

• clean the blood spill with warm soapy water

• clean the blood spill with extremely cold water
• wear gloves while cleaning - Answer ✔✔clean the blood spill with a 10% solution of bleach and water To avoid potential fires, combustible materials must be kept a minimum of __________ feet from any potential ignition - Answer ✔✔ 35 The __________ fire extinguisher does not leave a harmful residue and is sometimes used to put out fires on planes or expensive computer equipment.
• Carbon Dioxide
• Water-Pressurized
• Halon
• Powder Infused - Answer ✔✔Halon A suitable eyewash station should provide continuous water flow for at least __________.
• 10 minutes
• 15 minutes
• 30 minutes
• 40 minutes - Answer ✔✔ 15 A CO2 fire extinguisher is used for which type of fire?
• Magnesium

• Paper
• electrical
• wood - Answer ✔✔electrical The dates and charge on the fire extinguishers should be checked - Answer ✔✔Weekly When selecting a new chemical to use in the plant, its __________ should be reviewed as part of the decision making process.
• EPA
• SDS
• ANSI
• ASTM - Answer ✔✔SDS The amount of exposure to a chemical without the unreasonable risk of injury is listed on the SDS as __________. - Answer ✔✔TLV A flammable liquid falls into which category number in the DOT hazardous material identification system?
• 2
• 3
• 4
• 6 - Answer ✔✔ 3

The highest load rating a ladder may have is __________.

• Type III
• Type IAA
• Type IA
• Type A - Answer ✔✔IAA