NAVEDTRA Exam Questions with Verified Correct Answers 2024, Exams of Advanced Education

Download NAVEDTRA Exam Questions with Verified Correct Answers 2024 and more Exams Advanced Education in PDF only on Docsity!

NAVEDTRA Exam Questions with

Verified Correct Answers 2024

Who is the sponsor of the NAMP? a. Chief of Naval Operations (CNO) b. Commander, Naval Air Forces (COMNAVAIRFOR) c. In-Service Support Center (ISSIC) d. Type wing commander (TYCOM) - Correct Answer-a. CNO Who is responsible for the implementation of the NAMP? a. Chief of Naval Operations (CNO) b. Commander, Naval Air Forces (COMNAVAIRFOR) c. In-Service Support Center (ISSIC) d. Type wing commander (TYCOM) - Correct Answer-b. COMNAVAIRFOR What chapter of the NAMP has Maintenance Concept, Programs, and Processes; Maintenance Unit Department; Division Organization; Manpower Management; and Aviation Officers?

a. b. 2 c. 3 d. 4 - Correct Answer-c. 3 What chapter of the NAMP has Aircraft Controlling Custodians (ACCs) and Type Wing and Carrier Air Wing (CVW)? a. 1 b. 2 c. 3 d. 4 - Correct Answer-b. 2 What chapter of the NAMP has Quality Assurance? a. 3 b. 5 c. 7 d. 9 - Correct Answer-c. 7 What chapter of the NAMP has Maintenance Document Codes?

a. b b. c c. d d. e - Correct Answer-d. e What department is the largest in most operating aircraft units? a. Administration b. Maintenance c. Operations d. Supply - Correct Answer-b. Maintenance What level of maintenance is performed by an operating unit on a day-to-day basis in support of its own operations? a. Depot (D-level) b. Base operations (B-level) c. Intermediate (I-level) d. Organizational (O-level) - Correct Answer-d. O level What level of maintenance is performed in centrally located facilities for the support of operating activities within a

designated geographical area, at a particular base or station, or aboard aviation ships? a. Depot (D-level) b. Base operations (B-level) c. Intermediate (I-level) d. Organizational (O-level) - Correct Answer-c. I-level What level of maintenance is responsible for the manufacture of selected aeronautic components, liquids, and gases? a. Depot (D-level) b. Base operations (B-level) c. Intermediate (I-level) d. Organizational (O-level) - Correct Answer-c. I-level What are the two types of aircraft maintenance within the Navy? a. Periodic and scheduled b. Rework and upkeep c. Special and conditional d. Standard and unscheduled - Correct Answer-b. Rework and upkeep

Who is responsible to the MO for the overall productive effort and material support of the department and division? a. AMO b. MMCPO c. MCO d. MMCO - Correct Answer-d. MMCO What work center in an O-level maintenance command is responsible for establishing delivery and pickup points for the material that is ordered, and ensuring that the material that is received is promptly routed to the applicable work center? a. Airframes b. Maintenance control c. Material control d. Ordnance - Correct Answer-c. Material control What division at an I-level maintenance command is responsible for performing microminiature (2M) component repair? a. Airframes b. Armament

c. Aviation life support systems d. Avionics - Correct Answer-d. Avionics What division at an O-level maintenance command do plane captains work in? a. Aircraft b. Avionics/Armament c. Line d. Operations - Correct Answer-c. Line What division maintains a master maintenance message board? a. Administration b. Maintenance Administration c. Maintenance control d. Quality assurance - Correct Answer-b. Maintenance Administration Internal control and distribution of the NAMP is the responsibility of what division? a. Administration

b. Maintenance Administration c. Maintenance control d. Quality assurance - Correct Answer-d. Quality assurance Maintenance Administration shall maintain correspondence per what manual? a. OPNAV M-5442.3(series) b. OPNAV M-13700.3(series) c. SECNAV M-4790.2(series) d. SECNAV M-5210.2(series) - Correct Answer-d. SECNAV M-

You should know what details about every person in your office? a. Their age and title, and the manner in which they sign b. Their amount of service in years and past commands c. Their name, rank or rate, and the manner in which every signing official makes a signature d. Their name and date of birth - Correct Answer-c. Their name, rank or rate, and the manner in which every signing official makes a signature

What manual governs the safeguarding, correct handling, storage, and transmission of classified material? a. SECNAV M-5510.3(series) b. SECNAV M-5726.2(series) c.SECNAV M-5800.36(series) d.SECNAV M-5920.2(series) - Correct Answer-a. SECNAV M-

How many approved classifications of classified material are there? a. 1 b. 2 c. 3 d. 4 - Correct Answer-c. 3 What classification designation is applied only to material that the unauthorized disclosure of could be reasonably expected to cause to damage to national security? a. Confidential b. For Official Use Only (FOUO) c. Secret

d. Top Secret - Correct Answer-a. Confidential When must the combination of a classified storage container be changed? a. A new administration officer is assigned b. A new supervisor checks in c. The container is moved from one site to another d. The container is taken out of service - Correct Answer-d. The container is taken out of service The format of a standard letter is found in what manual? a. SECNAV M-5510.36(series) b. SECNAV M-5216.5(series) c. SECNAV M-5215.2(series) d. SECNAV M-5210.2(series) - Correct Answer-b. SECNAV M-

What size are the margins in a standard letter? a. 0.25" b. 0.5" c. 1.0"

d. 1.5" - Correct Answer-c. 1.0" In what manual would you find the standard subject identification (SSIC) for a standard letter? a. SECNAV M-5510.36(series) b. SECNAV M-5216.5(series) c. SECNAV M-5215.2(series) d. SECNAV M-5210.2(series) - Correct Answer-d. SECNAV M- 5210.2(series) If a letter is classified, the appropriate designation is typed in which of the following ways? a. TOP SECRET b. TOPSECRET c. Top Secret d. TopSecret - Correct Answer-a. TOP SECRET What is the brief form of a naval letter that is used to approve, disapprove, forward, or comment on the contents of a letter that is transmitted through one or more addressees before it reaches its destination called? a. Attachment

b. Enclosure c. Endorsement d. Validation - Correct Answer-c. Endorsement What type of memorandum is used to communicate informally within an activity? a. Memorandum of agreement b. Memorandum for the record (MFR) c. Printed memorandum forms d. Plain-paper memorandums - Correct Answer-d. Plain-paper memorandums What type of memorandum is used as an internal document to record supporting information that is not recorded elsewhere? a. Memorandum of agreement b. Memorandum for the record (MFR) c. Printed memorandum forms d. Plain-paper memorandums - Correct Answer-b. Memorandum for the record (MFR)

Who is the authority in whose name the message will be transmitted? a. Creator b. Drafter c. Originator d. Releaser - Correct Answer-c. Originator What is the primary means that is used to identify a naval message? a. Date-Time-Group (DTG) b. Plane language address (PLA) c. Precedence d. Subject - Correct Answer-a. Date-Time-Group (DTG) Naval messages are prepared in accordance with what manual? a. NTP b. NTP c. SECNAV M-5215. d. SECNAV M-5210.2 - Correct Answer-b. NTP 3

When using the REF (reference) set, you should use what set when there are multiple references? a. AMPN (amplification) b. MSGID (message identification) c. NARR (narrative) d. SUBJ (subject) - Correct Answer-c. NARR (narrative) What instruction sets forth the directive issuance system provides for a uniform method for issuing directives by all naval activities? a. COMNAVAIRFOR 4790. b. OPNAVINST 5215. c. SECNAV M-5210. d. SECNAV M-5510.36 - Correct Answer-b. OPNAVINST

What type of directive is of a onetime nature and usually contain information or action applicable for a brief period (usually 6months or less, but in no case more than 1 year)? a. announcement b. instruction c. manual

d. notice - Correct Answer-d. notice How many major subject groups are in the navy SSIC system? a. 10 b. 12 c. 13 d. 15 - Correct Answer-c. 13 What SSIC subject group is Logistics? a. 1000- b. 2000- c. 3000- d. 4000-4999 - Correct Answer-d. 4000- What SSIC subject group is Ordinance material? a. 8000- b. 9000- c. 10000- d. 10000-11999 - Correct Answer-a. 8000-

What is the name of the file for recurring reports that must be regularly submitted, usually within a specified period such as weekly, quarterly, or by the 5th day of a particular reporting period? a. organizational b. response c. tickler d. yearly due - Correct Answer-c. tickler What type of school provides basic job entry-level knowledge and skills? a. A b. C - Correct Answer-a. A What term best describes the following statement: consists of personnel performing maintenance tasks, by demonstration and simulation, under the supervision of designated, qualified personnel? a. OJT b. PQS c. QPA d. QPT - Correct Answer-a. OJT

SE operator licenses are valid for type equipment and aircraft for how long? a. 6mos b. 1 year c. 3 years d. 5 years - Correct Answer-c. 3 years What type of publication provides the basis for planning, scheduling, and actual performance of scheduled maintenance requirements? a. component and equipment b. IPB c. maintenance instruction manuals (MIMS) d. planned maintenance systems (PMS) pubs - Correct Answer-d. planned maintenance systems (PMS) pubs What type of publication contains scheduled or forced removal items and their replacement intervals, record of applicable technical directives, maintenance requirements system index by system, and a conditional inspection listing? a. component and equipment

b. daily, special, preservation, conditional, and aircraft service period adjustment (ASPA) c. PMIC d. PMS - Correct Answer-c. PMIC What command is responsible for defining and enforcing all policies relative to the creation, storage, and distribution of digital technical data? a. COMNAVAIRFOR b. COMNAVAIRSYSCOM c. NATEC d. TYCOM - Correct Answer-c. NATEC What are the two numbering system presently in use by NAVAIR? a. Conventional numbering system and Tactical Manual System (tmns) b. Conventional numbering system and Technical Manual Identification Numbering System (TMINS) - Correct Answer-b. Conventional numbering system and Technical Manual Identification Numbering System (TMINS)

In a conventional numbering system part 1, the number 01 designates what type of manual? a. airframes b. power plants c. ordnance d. support equipment - Correct Answer-a. airframes What naval aeronautic publications cross-reference publication is the airborne weapons stores publication index? a. NAVAIR 00-25- b. NAVAIR 01- c. NAVAIR 01- d. NAVAIR 02-4790 - Correct Answer-b. NAVAIR 01- What publication contains the policies and procedures that govern the TD system? a. COMNAVAIRFOR 4790. b. NOMP 8200. c. NAVAIR 00-25- d. NAVAIR 00-25-300 - Correct Answer-d. NAVAIR 00-25-

What is TD code for an avionics bulletin (AVB)? a. 54 b. 55 c. 74 d. 75 - Correct Answer-b. 55 What is TD code for an airframe change (AFC) a. 50 b. 60 c. 64 d. 74 - Correct Answer-a. 50 What TD priority is assigned to document configuration changes that have been incorporated in all affected equipment by the change designer/originator before the TD is issued? a. Immediate b. Record purpose c. Routine d. Urgent - Correct Answer-b. Record purpose

What TD priority is assigned when unsafe conditions exist that, if uncorrected, could result in fatal or serious injury to personnel, or extensive damage to or destruction of valuable property, and when such conditions embody risks which are calculated to be unacceptable? a. Immediate b. Record purpose c. Routine d. Urgent - Correct Answer-a. Immediate What TD type directs a one-time inspection to determine if a given condition exists and specifies what action shall be taken if the condition is found? a. Bulletin b. Formal change c. Interim change d. Rapid Action Minor Engineering Change (RAMEC) - Correct Answer-a. Bulletin What division is responsible for the management of the CTPL? a. administration b. maintenance administration

c. maintenance control d. QA - Correct Answer-d. QA What program is the only automated system authorized for use in managing CTPL technical data? a. PEMA b. NAVAIR TPL c. ELMS d. JKCS - Correct Answer-c. ELMS What authorized publication type for the ELMS program is identified by the letter D? a. compact disks b. NAVAIR digital c. navy directives d. TD - Correct Answer-c. navy directives How many parts is the ELMS main menu sub-divided into? a. 2 b. 4 c. 6

d. 8 - Correct Answer-b. 4 What ELMS function should be accomplished daily, but is mandatory to be accomplished weekly in order to keep the library current and manageable? a. automatic distribution b. generate and print CECR c. library audit d. run reports - Correct Answer-c. library audit How is a technical publication library established in an activity that is newly commissioned or reactivated? a. A formal request on official letterheard for initial outfitting is mailed to NATEC b. A naval message for initial outfitting is sent to NATEC requesting establishment c. A letter requesting initial outfitting is sent to the technical publication specialist in your local area d. An ELMS initial outfitting request is filled out online - Correct Answer-a. A formal request on official letterheard for initial outfitting is mailed to NATEC

What form is used to initiate a one-time (supply action) request for NAVAIRSYSCOM TMs, TDs, and departmental directives? a. DD 1245 b. DD1348 c. OPNAV 4790/60 d. OPNAV 4790/61 - Correct Answer-b. DD1348 Within how many days should CONUS based activities follow up on the requisition if an activity has not received any communication, i.e from WSS-Philadelphia, concerning its requisitions for manuals? a. 30 b. 45 c. 60 d. 75 - Correct Answer-b. 45 Who is responsible for the development, establishment, and operation of technical library services in support of local operations and maintenance? a. AMO b. CMC

c. CO d. Department Head - Correct Answer-c. CO How many types of libraries may be in an activity? a. 1 b. 2 c. 3 d. 4 - Correct Answer-c. 3 What is the minimum length of time a CTPL should be retained in the billet for? a. 6mos b. 1 yr c. 2 yr d. 3 yr - Correct Answer-b. 1 yr What publication governs the control of classified publications? a. NA-00-25-100 b. NA-00-25-300 c. SECNAV M-5215.2

d. SECNAV M-5510.36 - Correct Answer-d. SECNAV M-5510.36 At a minimum, what items should be on an inventory control stamp? a. Activity, copy number, and location b. Activity, copy number, location, and date received c. Work center, publication number, and location d. Work center, publication, and ELMS data number - Correct Answer-a. Activity, copy number, and location Which of the following is an example of how the binder should be labeled when more than one manual or type of directive is placed in the same binder? a. NAVAIR 10-20-1/NAVAIR 10-20-10 b. NAVAIR 10-20-10/NAVAIR 10-20-10 c. NAVAIR 10-20-1 THRU NAVAIR 10-20-10 d. NAVAIR 10-20-10 THRU NAVAIR 10-20-01 - Correct Answer- c. NAVAIR 10-20-1 THRU NAVAIR 10-20-10 What is a collective term for all of the records and files that represent the work carried out by the CTPL? a. automatic distribution requirements list