NCCER CORE FINAL EXAM 2024-2025 VERIFIED QUESTIONS AND ANSWERS, Exams of Nursing

Download NCCER CORE FINAL EXAM 2024-2025 VERIFIED QUESTIONS AND ANSWERS and more Exams Nursing in PDF only on Docsity!

NCCER CORE

FINAL EXAM

2024-

VERIFIED

QUESTIONS AND

ANSWERS

NCCER CORE FINAL

Which of these is a true statement regarding safety? Safety is a learned behavior and attitude. A measure of the probability, consequences, and exposure related to an event is referred to as _____. Risk When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _____. 3 feet One of the most common grounding systems used for protection against accidental electrical shock is the _____. three-wire system

When there is the potential to be exposed to asbestos, workers must _____. report it to a supervisor and avoid disturbing it What is the place value of 2 in the number 123,456? ten thousands Add the following numbers together: 811, 901, 88, and 5. The sum is _____. 1805 Your job as a carpenter pays $20/hour and you worked 40 hours last week. The taxes withheld from your wages were $83 federal tax and $19 state tax. Your total check is _____. $ 1/4 + 3/8 = _____. Reduce your answer to the lowest terms. 5/ When converting decimals to a percentage, simply move the decimal point _____.

two places to the right Another common name for lineman pliers is _____. side cutters When an object is plumb, it is _____. perfectly vertical Which of the following saws would likely have the fewest teeth per inch, resulting in the largest teeth? A ripsaw The best designed saw for cutting miter joints is a _____. backsaw The safest kind of utility knife is one with a _____. self-retracting blade Before replacing parts such as bits, blades, or discs on any tool, you must _____.

disconnect the power source When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's _____. kerf Before you plug any saw into a power source, make sure the _____. power switch is in the off position A saw that has a thin, one-piece blade that runs around guides at either end of the saw is a __. bandsaw Before using a pneumatically powered nailer for the first time, it is important to _____. read the manufacturer's instructions Plans used for work that has to do with construction in or on the earth are called _____. civil plans

We have an expert-written solution to this problem! The material to be used for the walls would be found in the _____. structural plan Gridlines are used to _____. make it easy to refer to specific locations on a plan A dimension is a measurement written as a _____. number One way that an engineer's scale differs from an architectural scale is that the engineer's scale _____. is based on units of 10 The maximum load weight that a sling is designed to carry is the _____. rated capacity When a tattle-tail has been pulled into the jacket of a synthetic sling, the sling most likely has been _____.

overloaded If a wire rope sling appears to be damaged, the decision to keep it in service must be made by a _____. competent person A type of hand-operated winching device that should never be used for vertical overhead lifting is a _____ come-along If an emergency occurs during a rigging operation, who is allowed to give the emergency stop hand signal? Anyone on the ground who is in site of the crane operator. In the study of communication, noise is best defined as _____. anything that interferes with the message being heard or understood If someone does not understand what a speaker is saying, he or she should _____. ask the speaker questions for clarification

When listening to instructions, the best way for listeners to make sure they get all the information is to _____. take notes, ask questions, and repeat a summary of the instructions An important attribute of an effective speaker is the ability to _____. explain and simplify complex topics What is an important practice in writing to avoid errors that can cost time and money? Proofreading the work for accuracy. We have an expert-written solution to this problem! A company's documented philosophy is called its _____. mission statement The time to learn about a potential employer is _____. before the application is submitted

When preparing a resume, you should _____. format the information chronologically During a job search, it is a good practice to _____. look for jobs that match your skills and experience Before employment begins, candidates for construction jobs must often _____. take and pass a drug test Before attempting to lift any material, _____. look for any protruding nails, wires, or sharp edges Before attempting to lower an overhead load, _____. size up the load What is the proper procedure to lift objects? Lift with your legs, keep your back straight, and keep your head up

To transport a bottle of compressed gas, use a _____. cylinder cart To work with motorized material-handling equipment, a worker must be _____. trained, certified, and authorized What type of carpenter is likely to work on a personal house Residential Which of the following would most likely work with adhesive materials? floor layer Which type of tradesperson frequently works from scaffolding at great heights? commercial carpenter The construction process begins with which of the following stages? site preparation

Most carpenters work in these environments All of the above