NCIDQ - IDFX Practice Questions and Answers with Verified Solutions 100% Correct | Updated, Exams of Nursing

Download NCIDQ - IDFX Practice Questions and Answers with Verified Solutions 100% Correct | Updated and more Exams Nursing in PDF only on Docsity! NCIDQ - IDFX Practice Questions and Answers with Verified Solutions 100% Correct | Updated 2024 Occupancy group - Answer The minimum number of toilet fixtures for an interior design is determined by occupant load and? Exit enclosures - Answer Where are flame spread ratings in a building the MOST restrictive 1 hour - Answer Exit access corridors in non-sprinklered buildings must have a rating of? occupancy group, and the location in the building where finishes will be used - Answer When selecting interior partition finishes to meet flame spread standards, the MOST important considerations are? 20 ft - Answer According to the IBC, dead-end corridors in unsprinklered buildings are limited to a maximum of? aisle stairs - Answer According to the IBC, handrails in commercial construction are required along both sides of a stairwell in all cases except? kitchens - Answer Exit routes may NEVER pass through? Door swing and approach dimension - Answer When considering the initial space planning of an accessible toilet room, what design elements should be of MOST concern? Visual and audible alarms - Answer What are the MOST important design elements to incorporate into a hotel to provide safe egress for physically disabled people? the distance from finish floor slab to to finish floor slab - Answer What is included in the rise of a stair? three 36 inch doors remotely located. (each provides 33 inches of exit width.) - Answer A designer has calculated that a total exit width of 8 ft is required from a store, according to IBC standards. What combination of door widths would meet most existing requirements. travel distance - Answer in a 90,000 square foot single story building, what would be of greatest concern in space planning? The glass doors will have to be replaced with either solid, 20-minute rated doors or with 20-minute rated doors with glass that is also rated 20 minutes. Because this will drastically change the appearance of the entrance, this is the first thing the client should be told. - Answer A client has requested a new entry to her business, which is located in an old, unsprinklered building. The current entrance consists of a pair of all glass doors mounted on floor closers. The entrance opens onto a 1-hour rated building corridor. To conform to current IBC requirements, what would the designer tell the client to expect regarding the new entrance? Contractor - Answer In most situations, the application for a building permit is made by the? all accessible spaces and parts of a building - Answer An accessible route must serve? scoping provisions of the local building code - Answer In addition to meeting the requirements for ADA, what other accessibility requirements should the interior designer be MOST concerned with when doing design development for a commercial project? 15 cfm/person - Answer The absolute minimum fresh air ventilation rate recommended by ASHRAE Standard 62 is? 1973 - Answer What year was the use of spray on fireproofing and insulation containing asbestos prohibited in new construction? based on location and occupancy - Answer The flame spread rating of wood panel wainscoting must be? Polyurethane - Answer What finish type should be specified to create the most durable wood finish? Laser scanning - Answer What is the most accurate way to measure the interior distances of a large church? A change order - Answer During construction, a client requests that a door be added to a partition. Given that the client agrees to the added cost, the interior designer administering the associated contractor should issue? Owner - Answer Establishing the final contract requirements between an owner and a contractor is the responsibility of the? developing a list of contractors who have experience in the project type and then asking them to bid on the job - Answer What contractor selection method would be BEST for a client who wants to get the lowest price fro remodeling a complex data-processing facility? pre qualification of bidders - Answer Owners set bidder requirements in the? collect and send all warranties to the owner - Answer During project closeout, the interior designer is NOT required to? durability, cost, then design - Answer What should be considered when choosing tables for a college library? (order of importance?) Railroading - Answer Which type of seaming is the MOST appropriate for upholstered furniture in a smoking lounge? Shorten the length of the fabric - Answer How can a drapery treatment be BEST changed to minimize its hazard during a fire? Cushioning and surface fabric - Answer What MOST affects the flammability of upholstery? rayon - Answer What is the LEAST desirable choice of fabric for a sofa in a sunroom? Specify Channeling - Answer What is the BEST way to avoid fabric slippage over a cushion? Channeling - Answer What is the method of directly attaching a fabric to a cushion called? not burn - Answer When a fabric has been fire retardant treated, it will? VOC emissions - Answer What is the most important to consider when selecting paint for a hospital? a sales agreement - Answer The is client is most typically involved with procurement of furniture through? drop ship order - Answer When the interior designer does not want furniture to be delivered to the designer's office, the designer should complete a? acknowledgement - Answer What document provides the designer with verification that an item was ordered correctly? quantity takeoff - Answer What provides the MOST accurate basis for estimating project costs? the most detailed and accurate method of developing a budget - Answer What is a quantity takeoff? contingency - Answer A line item included in a budget to account for unknown conditions is called a? interior designer and furniture dealers - Answer Furniture budgets can be accurately estimated by? Type I - Answer What type of vinyl awl covering should be recommended for the family room in a single family dwelling? Type 1 - Answer What is the lightest weight of the three types of vinyl wall coverings? Wilton - Answer What carpet type allows a complex, custom patterned carpet with varying pile heights? parquet - Answer What type of wood flooring could be installed easily and least expensively in a residential installation? Wool carpet, direct glued - Answer What is the least desirable choice for a carpet installation for hotel rooms that have concrete subfloors? The amount of noise reduction isn't substantial enough for the cost. - Answer A material supplier claims adding his product to a wall assembly would increase the noise reduction (STC rating) by slightly more than 3 dB, how should the designer respond? a heavy duty, silent door closer - Answer When detailing a doorframe for a conference room where privacy is crucial, what is least likely to be required? improve the acoustic characteristics of the wall - Answer Insulation is used in interior walls to? reverberation time - Answer Changing a ceiling from gypsum wallboard to acoustic tile would most affect a room's? a vaulted ceiling - Answer In a small lecture hall it would be best to avoid? footlamberts - Answer What is the unit used to measure luminance?