Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA 10 Final Exam 100% VERIFIED SOLUTIONS ALREADY PASSED 2024/2025, Exams of Health sciences

OSHA 10 Final Exam 100% VERIFIED SOLUTIONS ALREADY PASSED 2024/2025

Typology: Exams

2023/2024

Available from 04/24/2024

DYNAMICSCORES
DYNAMICSCORES 🇺🇸

3.6

(11)

1.4K documents

1 / 14

Toggle sidebar

Related documents


Partial preview of the text

Download OSHA 10 Final Exam 100% VERIFIED SOLUTIONS ALREADY PASSED 2024/2025 and more Exams Health sciences in PDF only on Docsity! OSHA 10 Final Exam 100% VERIFIED SOLUTIONS ALREADY PASSED 2024/2025 creation of OSHA provided this important right to workers: The right to a safe and healthful workplace. What type of OSHA inspection is conducted when immediate death or serious harm is likely? Imminent danger. OSHA requires that employers pay for most required personal protective equipment (PPE), including: Hard hats. During an OSHA inspection: You have the right to talk to the inspector privately. When an employer receives an OSHA citation, it must be: Posted for 3 days or until the violation is fixed. The right of workers to seek safety and health on the job without fear of punishment is spelled out in: Section 11(c) of the OSH Act. Among the rights related to OSHA recordkeeping, workers have the right to review: The OSHA 300 Log and the OSHA 300 Summary. OSHA's mission is to: Protect the safety and health of America's workers. One of the main responsibilities employers have under OSHA is to: Provide training required by OSHA standards. A Material Safety Data Sheet (MSDS) gives in formation about: Hazardous chemicals. If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which is your best option? Submit a written, signed complaint with specific hazard information. The OSHA standards for Construction and General Industry are also known as: Part 1926 and Part 1910. When working over dangerous equipment and machinery, fall protection must be provided ___________. regardless of distance Falls, struck-by object, caught-in or between, and electrocution are referred to by OSHA as ___________. "Focus Four" Hazards Webbing used for lifeline, lanyard and harness ropes and straps must be made of ________ fibers. Employers need to have rescue procedures in place in the event of a fall. True Wet or damp conditions worsen electrocution hazards. True Which of the following are preventative measures that can be taken to protect yourself from electrocution hazards? A and C only ([a] Keep a safe distance from overhead power lines, [c] Use nonconductive equipment) Which of the following are ways employers must protect their employees on the job site? All of the above ([a] Ensure overhead power line safety, [b] By supplying GFCIs, or ground-fault circuit interrupters, [c] Establish and enact an assured equipment grounding conductor program [AEGCP]) Which of the following items contributed to the electrocution in the previous case study? All of the above ([a] Use of known faulty equipment, [b] lack of grounding, [c] Short in a receptacle) It's okay to use extension cords with worn insulation, as long as you are careful about it. False Employers are NOT required to enforce lockout/tagout safety-related work practices on the job site. False Which of the following is NOT a category of electrical burns? Shock Electrocution was the second leading cause of worker deaths on construction sites in the United States in 2011. True Which of the following are a part of PPE that can prevent electrocution? All of the above ([a] Rubber insulating gloves, [b] hoods, [c] sleeves) In the previous case study, what measures could have been taken to prevent the accident from occurring? Both of the above could have prevented the accident from occurring ([a] Workers should have been aware of overhead power lines, [b] employees should have received proper safety training) If your hard hat sustains a heavy blow from a falling or flying object you ___________________. must replace it immediately To safely control the traffic flow and protect workers near public roadways and moving construction equipment use you could use? All of the above ([a] Traffic signs, [b] barricades, [c] flaggers) All rigging equipment must be inspected _________ each lift. prior to A struck-by hazard can be described as anytime a worker _____________. is hit by a falling, swinging, flying or rolling object. As a load is mechanically lifted, the materials ______________. may strike workers if the load swings, twists or turns. Struck-by injuries are produced by forcible contact or impact between the injured person and a/n _____________________. object or piece of equipment The following are examples of struck-by hazards. Which one is an example of a struck-by flying hazard? Hit by a nail from a nail gun Employers must protect workers from struck-by hazards by _______________. providing PPE such as hard hats and safety glasses Struck-by ____________ object hazards exist when something is being propelled, hurled or thrown. flying Among the list of ways workers can protect themselves when working on or near any construction zone, is to _________________. If a hard hat sustains impact, it should: Be replaced If employees use a respirator under any circumstances, the employer should have: A written respiratory program Eye and face protection selected for employee use must clearly identify the: Manufacturer This footwear may be designed to be electrically conductive or non-conductive Safety shoes If an employee who needs eye protection wears prescription lenses, he or she should: A and B ([a] Wear eye protection that incorporates the prescription into the design, [b] wear additional eye protection over their prescription lenses) Which of the following types of hard hats are NOT ANSI approved: Bump Hats An industrial hygienist identifies exposures, problems, tasks and risks of the workplace by performing a(n): Worksite analysis Lead exposure can cause all of the following except: Skin burns The first choice for how to reduce or eliminate a hazard is: Engineering controls What type of correctional program is used to plan the best way to control or prevent hazards in the event of an emergency? Emergency preparation The basic worksite analysis performed by an industrial hygienist includes: All of the above ([a] Inspection of all jobs, operations and work activities, [b[ research on how physical hazards at that worksite affect worker health, [c] recommendations for any necessary, appropriate corrective actions) One of the benefits of a well-designed ergonomic work environment is low operating costs. True These types of contaminants can result from welding, cleaning or painting: Gas or Vapor The common drinking cup is ______ in the working place. prohibited ___________ can be caused by repetitive motions or repeated shocks over prolonged periods of time. Carpal tunnel syndrome In occupations where there is exposure to ionizing radiation, time, distance and _________ are important in considering worker safety. shielding Which of the following is the principal source of compensable injuries in the American work force? Manual material handling A wire rope sling with a strength of 10,000 pounds and a total working load of 2,000 pounds has a design factor (multiplier) of_____. 5 Which of the following is required for inclusion on a synthetic webbing label? All of the above ([a] Name and trademark of manufacturer, [b] rated capacities for the type of hitch, [c] type of material) Safe lifting training should include: All of the above ([a] General principles of ergonomics, [b] procedures for reporting hazardous conditions, [c] health risks related to improper lifting) When using industrial fork-lifts, the load must be at the lowest position for traveling, and the truck manufacturer's operational requirements must be followed. True Used lumber must have which of the following withdrawn before stacking? Nails