OSHA 10 Final Exam 2025 (Questions With Verified Answers) Graded A+, Exams of Workplace Safety

Download OSHA 10 Final Exam 2025 (Questions With Verified Answers) Graded A+ and more Exams Workplace Safety in PDF only on Docsity! OSHA 10 Final OSHA 10 Final Exam 2025 (Questions With Verified Answers) Graded A+ OSHA requires that employers pay for most required personal protective equipment (PPE), including: Hard hats. During an OSHA inspection: You have the right to talk to the inspector privately. The creation of OSHA provided this important right to workers: The right to a safe and healthful workplace. What type of OSHA inspection is conducted when immediate death or serious harm is likely? Imminent danger. When an employer receives an OSHA citation, it must be: Posted for 3 days or until the violation is fixed. The right of workers to seek safety and health on the job without fear of punishment is spelled out in: Section 11(c) of the OSH Act. OSHA 10 Final Among the rights related to OSHA recordkeeping, workers have the right to review: The OSHA 300 Log and the OSHA 300 Summary. OSHA's mission is to: Protect the safety and health of America's workers. One of the main responsibilities employers have under OSHA is to: Provide training required by OSHA standards. A Material Safety Data Sheet (MSDS) gives in formation about: Hazardous chemicals. If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which is your best option? Submit a written, signed complaint with specific hazard information. The OSHA standards for Construction and General Industry are also known as: Part 1926 and Part 1910. When working over dangerous equipment and machinery, fall protection must be provided ___________. OSHA 10 Final Employees may file a complaint with OSHA if unsafe working conditions are not corrected. True The top of a ladder must extend at least ______ above the surface you are climbing onto. 3 feet Safety nets must absorb the force of a 400-pound bag of sand dropping onto the net. This is referred to as a "__________". drop test Employers are required to keep worksites free from: All of the above ([a] Scrap lumber with protruding nails, [b] Waste and trash, [c] Combustible liquids.) Scaffold accidents are usually attributed to factors like the planking or support giving way, or to a lack of guardrails or fall protection. True Employers need to have rescue procedures in place in the event of a fall. True OSHA 10 Final Wet or damp conditions worsen electrocution hazards. True Which of the following are preventative measures that can be taken to protect yourself from electrocution hazards? A and C only ([a] Keep a safe distance from overhead power lines, [c] Use nonconductive equipment) Which of the following are ways employers must protect their employees on the job site? All of the above ([a] Ensure overhead power line safety, [b] By supplying GFCIs, or ground-fault circuit interrupters, [c] Establish and enact an assured equipment grounding conductor program [AEGCP]) Which of the following items contributed to the electrocution in the previous case study? All of the above ([a] Use of known faulty equipment, [b] lack of grounding, [c] Short in a receptacle) It's okay to use extension cords with worn insulation, as long as you are careful about it. False Employers are NOT required to enforce lockout/tagout safety-related work practices on the job site. False OSHA 10 Final Which of the following is NOT a category of electrical burns? Shock Electrocution was the second leading cause of worker deaths on construction sites in the United States in 2011. True Which of the following are a part of PPE that can prevent electrocution? All of the above ([a] Rubber insulating gloves, [b] hoods, [c] sleeves) In the previous case study, what measures could have been taken to prevent the accident from occurring? Both of the above could have prevented the accident from occurring ([a] Workers should have been aware of overhead power lines, [b] employees should have received proper safety training) If your hard hat sustains a heavy blow from a falling or flying object you ___________________. must replace it immediately OSHA 10 Final All hand-held power tools should have guards and _______ on them. safety switches Which procedure helps to ensure equipment doesn't accidentally reenergize when it's being repaired or worked on? Lockout/Tagout One who is capable of identifying existing and predictable hazards in the surroundings and who has authorization to take prompt corrective measures to eliminate them is a(n) _________. competent person Workers should not work in an unprotected trench that is 5 feet deep or more. The type of protection installed may be sloping or benching, trench box or shield and ____________. shoring. Workers should wear a __________ if required, to avoid being thrown from a vehicle and crushed as the vehicle tips over. seatbelt Providing worker training on the safe use of the equipment being operated is the responsibility of the: Employer All respiratory protection equipment must be approved by: NIOSH OSHA 10 Final The first step in developing a comprehensive safety and health program including personal protective equipment is to: Perform a hazard assessment These gloves offer good pliability and protect against harmful elements such as hydraulic fluids, gasoline and alcohols: Neoprene If the employee provides his or her own protective equipment, the employee is responsible for: None of the above ([a] Its adequacy, [b] its maintenance, [c] its sanitation) If a hard hat sustains impact, it should: Be replaced If employees use a respirator under any circumstances, the employer should have: A written respiratory program Eye and face protection selected for employee use must clearly identify the: Manufacturer OSHA 10 Final This footwear may be designed to be electrically conductive or non-conductive Safety shoes If an employee who needs eye protection wears prescription lenses, he or she should: A and B ([a] Wear eye protection that incorporates the prescription into the design, [b] wear additional eye protection over their prescription lenses) Which of the following types of hard hats are NOT ANSI approved: Bump Hats An industrial hygienist identifies exposures, problems, tasks and risks of the workplace by performing a(n): Worksite analysis Lead exposure can cause all of the following except: Skin burns The first choice for how to reduce or eliminate a hazard is: Engineering controls OSHA 10 Final Used lumber must have which of the following withdrawn before stacking? Nails Maximum safe load limits of _____ must be posted within the buildings and structures. floors When disposal materials are dropped more than 20 feet to an exterior location, an enclosed chute must be used. True When traveling on a fork lift, the carried load must be at the highest feasible position during travel. False General requirements do not apply to slings used in conjunction with other material handling equipment for the movement of material by hoisting. False All ______________ that are designed to accommodate guards must be equipped with properly functioning guards when in use. power-operated tools What test should be performed on abrasive wheels? OSHA 10 Final Ring test Impact tools, such as chisels, with __________ heads should be removed from use. mushroom Fixed, power-driven woodworking tools are not required to be provided with a disconnect switch that can either be locked or tagged in the off position. False Powder-actuated tools should never be used on _________ materials. All of the above ([a] Hard, [b] Metallic, [c] Brittle) Most tools that run on liquid fuel are powered by: Gasoline Compressed air can be used for cleaning as long as it is less than 30 psi. True Jacks must be inspected: All of the above OSHA 10 Final ([a] At least once every 6 months, [b] when sent out and returned from repair, [c] before and after use when subjected to abnormal loads) Jointers should be fitted with which of the following types of guards: Point of operation guards Appropriate switches for belt sanders are: Momentary contact on/off switches