OSHA 10 Hour Final Exam Questions and Answers, Exams of Workplace Safety

Download OSHA 10 Hour Final Exam Questions and Answers and more Exams Workplace Safety in PDF only on Docsity!

OSHA 10 Hour Final Exam Questions

and Answers 100% Correct

OSHA's mission is to: - ANSWER-Protect the safety and health of America's workers. The creation of OSHA provided this important right to workers: - ANSWER-The right to a safe and healthful workplace. OSHA requires that employers pay for most required personal protective equipment (PPE), including: - ANSWER-Hard hats. What type of OSHA inspection is conducted when immediate death or serious harm is likely? - ANSWER-Imminent danger When working over dangerous equipment and machinery, fall protection must be provided __________. - ANSWER-Regardless of distance Falls, struck-by object, caught-in or between, and electrocution are referred to by OSHA as - ANSWER-Focus Four Hazards Overreaching is a factor that contributes to falls or fatalities involving ladder usage. - ANSWER-True More ________ are killed from falls than in any other construction occupation. - ANSWER-Ironworkers Caught in or -between hazards are related with excavations [trenches]; therefore, the hazard considered to be the greatest risk is: - ANSWER-Cave-ins To protect against caught-in or -between hazards, a worker should not only avoid wearing loose clothing or jewelry, but also a worker should avoid: - ANSWER-Working with equipment/machinery that has not been locked-out To prevent being pinned between equipment or other objects, workers should avoid - ANSWER-Placing themselves between moving vehicles and an immovable structure, vehicle, or stacked materials Workers should wear a ________ if required, to avoid being thrown from a vehicle and crushed as the vehicle tips over. - ANSWER-seatbelt

All hand-held power tools should have guards and _______ on them. - ANSWER-Safety switches Which of the following are ways employers must protect their employees on the job site? - ANSWER-All of the above What type of correctional program is used to plan the best way to control or prevent hazards in the event of an emergency? - ANSWER-Emergency preparation When using industrial fork-lifts, the load must be at the lowest position for traveling, and the truck manufacturer's operational requirements must be followed. - ANSWER-True When traveling on a fork lift, the carried load must be at the highest feasible position during travel. - ANSWER-False Appropriate switches for belt sanders are: - ANSWER-Momentary contact on/off switches Powder-actuated tools should never be used on _______ materials. - ANSWER-Brittle Jacks must be inspected: - ANSWER-All of the above