OSHA 30 Final Exam Review Accurate(2024 Latest Update)Correct 100%, Exams of Humanities

Download OSHA 30 Final Exam Review Accurate(2024 Latest Update)Correct 100% and more Exams Humanities in PDF only on Docsity! OSHA 30 Final Exam Review Accurate(2024 Latest Update)Correct 100% Hand tools are powered instruments, which can be very hazardous when improperly used due to their power source. - ANSWER False Which of the following is not a correct general precaution that should be followed by all power tool users? - ANSWER Handle tools by the cord or hose Safety guards must never be removed when a tool is being used. - ANSWER True What is the main danger associated with pneumatic tools? - ANSWER Getting hit by tool's attachment or fastener The operating control on hand-held power tools must be located at to minimize the possibility of accidental operation, if such accidental operation would constitute a hazard to employees. - ANSWER True What requirements are necessary to protect an electric tool user from shock? - ANSWER Both A and B All portable, power-driven circular saws having a blade diameter greater than 3 in. must be equipped with guards above and below the base plate or shoe - ANSWER False An important safety precaution to remember when operating powder-actuated tool is: - ANSWER Inspect it before use and determine that it is clean and that all moving parts operate freely Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal temperature lift. - ANSWER False Who is responsible for the safe conditions of tools and equipment used in the workplace? - ANSWER Employers What does MSD stand for? - ANSWER musculoskeletal disorders You should change your working position frequently by: - ANSWER All of the above regardless of how good your working posture is, working in the same posture or sitting for prolonged periods is not healthy. - ANSWER True Hazard prevention and control includes - ANSWER Implementing administrative and engineering controls __________ Must not be stored near highly combustible material. - ANSWER Oxygen Cylinders Helmets or hand shields must be used during all arc welding or arc cutting operations, excluding submerged arc welding. - ANSWER True Supervisors must protect combustibles from ignition by using which of the following procedures? - ANSWER Have the work moved to a location free from dangerous combustibles In circumstances for which it is impossible to provide such ventilation, airline respirators or hose masks approved for this purpose by OSHA must be used. - ANSWER False Empty oxygen cylinders must have their valves: - ANSWER Closed Cylinder valves must be immediately repaired or sealed if an operator discovers a malfunction. - ANSWER False If an energy isolating device is capable of being locked out, the employer's energy control program must utilize lockout, Unless the employer can demonstrate that the utilization of a tagout system will provide full employee protection as set forth by OSHA regulations. - ANSWER True Which of the following does the lockout and tagout standard not apply to? - ANSWER All of the above Lockout/tagout establishes the maximum performance requirements for the control of such hazardous energy. - ANSWER False Lockout devices and tagout devices must be : - ANSWER All of the above Lockout devices must be substantial enough to prevent removal without the use of excessive force or unusual techniques, such as with the use of bolt cutters or other metal cutting tools. - ANSWER True Where appropriate, the employer must provide the following materials for isolating, securing or blocking machines or equipment from energy sources: - ANSWER Locks/Tags What is the first step in the application of energy control (lockout or tagout procedures) sequence? - ANSWER Preparation for shutdown Following the application of lockout or tagout devices to energy isolating devices, all potentially hazardous stored or residual energy must be relieved. - ANSWER False The employer must comply with an employee's or employee representative's request to examine and copy abatement documents within - ANSWER 5 Which of the following is not a possible method of transmission for Hepatitis B, Hepatitis C, or HIV? - ANSWER Blood splash on properly secured PPE Which of the following has a vaccine? - ANSWER Hepatitis B Which of the following presents a sharps hazard? - ANSWER Uncapped syringe What are bloodborne pathogens? - ANSWER Infectious microorganisms present in human blood Which of the following is an example of an engineering control? - ANSWER Using self re-sheathing needles Which of the following is the best method of preventing Hepatitis B? - ANSWER Vaccination A method of infection control where all human blood and potentially infectious, regardless of whether they are believed to be infected or not, is called _____________ - ANSWER universal precautions Contaminated sharps must be disposed of in ____________ - ANSWER closeable, labeled, leak-proof containers built to properly contain all contents When must Exposure Control Plans be updated? - ANSWER All of the above Which of the following is not an example of appropriate PPE? - ANSWER Prescription glasses Which of the following is an exception to the general rule for safeguarding to prevent hazards during servicing and maintenance of machines? - ANSWER All of the above Which of the following is a type of machine safeguarding? - ANSWER Feeding and ejection methods Which of the following is the definition of point of operation? - ANSWER Area on a machine where the work is performed Which of the following is not a common type of hazardous mechanical motion? - ANSWER Shearing Which of the following is a description of a pullback device? - ANSWER Device that uses cable attached to hands which allows access to the point of operation when the slide/ram is up and automatically withdraws hands when the slide/ram begins to descend.. It is not necessary that the lockout or tagout process is performed only by the authorized employees who are performing the servicing or maintenance. - ANSWER False Safety de-energizing the debarker requires that six electrical sources and one pneumatic energy source needed to be disconnected and locked out. - ANSWER True A(an) _____________ is an individual stationed outside one or more permit spaces who monitors the authorized entrants. - ANSWER attendant The act of providing a space with fresh air in place of air that has been used or contaminated is known as what? - ANSWER Ventilation With the use of calibrated direct-reading instruments, which of the following can be tested in the internal atmosphere of a confined space? - ANSWER All of the above All employees required to enter a confined space should be informed of ______________ - ANSWER All of the above A permit-required confined space may be reclassified as a non-permit confined space under which of the following conditions? - ANSWER All of the above Employees may not enter a confined space until the forced air ventilation has eliminated any hazardous atmosphere. - ANSWER True An employer should order a(an) ______________ of the permit space when a worker shows signs of physiological effects of hazard exposure. - ANSWER evacuation If a hazardous atmosphere is detected during entry, employees must immediately leave the space. - ANSWER True Authorized entrants who enter a permit space must wear ___________. - ANSWER a chest or full body harness with a retrieval line Employees who work in confined spaces face increased risk of entrapment, engulfment, and hazardous atmospheric conditions. - ANSWER True The ______________ the flashpoint, the ____________the hazard. - ANSWER Lower, Greater An example of a possible source of ignition includes all of the following EXCEPT: - ANSWER Leaking water pipe Flammable liquids have been updated and divided into ________ categories. - ANSWER 4 The Hazard Communication Standard was modified to adopt the Globally Harmonized System to: - ANSWER Provide a standardized approach to hazard communication All container of hazardous chemicals leaving the workplace must be labeled, tagged, or marked with the following information except? - ANSWER Name, address, and telephone number of employees using chemical at worksite The ___________ pictogram is used to warn about the oxidizer class of chemical hazards. - ANSWER Flame over Circle Hazard Communication covers both __________ and health hazard. - ANSWER Physical Employers should follow these three steps for putting a Hazard Communication program into practice: - ANSWER Identify responsible staff, identify hazardous chemicals, and prepare and implement the program Sections _____________ of the Safety Data Sheet (SDS) contains general information about the chemical, identification, hazards, composition, safe handling practices, and emergency control measures. - ANSWER 1 though 8 If a chemical manufacturer, importer, or employer becomes aware of any significant information regarding the hazards of a chemical or ways to protect against hazards, this new information must be added to the SDS within__________ months. - ANSWER Three Which of the following is the general definition of Hazard Communication? - ANSWER Hazard Communication is all about analyzing chemical components and testing for chemical hazard to ensure a safe and healthy work environment. Chemicals in the _________ class are liquids which, even in small quantities, are liable to ignite within five minutes after coming into contact with air. - ANSWER Pyrophoric Liquid When a hard hat sustains an impact, it should : - ANSWER Be replaced Which of the following types of protection is an employer required to pay for? - ANSWER Hearing protection PPE is used when _______, ________, and _______ controls are not possible or do not provide suitable protection for workers. - ANSWER Engineering, work practice, and administrative The leading cause of slips, trips, and falls is - ANSWER Contaminants on the walking surface The following are all machine safeguarding requirements except: - ANSWER Must prevent workers from lubricating a machine without removing the safeguard Which of the following should employers prevent in order to ensure the safety and health of workers in regards to machine guarding? - ANSWER Allowing workers to use a machine without training Which of the following types of machine guard is generally preferred because of its simplicity and durability? - ANSWER Fixed Which of the following is a function of a safety device? - ANSWER All of the above Any part of a machine which __________ while in operation can cause a hazard. - ANSWER Moves Which of the following motions is commonly cited as a cause for back injuries? - ANSWER All of the above The critical parts of a crane, such as operating mechanisms and system components, must be inspected ______________ for any issues or damage. - ANSWER daily Make sure to keep ___________ clear of obstructions to prevent worker injuries and damaged materials. - ANSWER Aisles and passageways Which of the following is manual material handling? - ANSWER Carrying a heavy tool Which of the following is mechanical material handling? - ANSWER Lifting something with a crane Around 20 to 25 percent of forklift-related injuries were related to ________? - ANSWER Inadequate training Which of the following openings does not require guardrails? - ANSWER Temporary floor openings Rigging equipment should be proof tested _____________ use to ensure it can handle the loads it will be used for. - ANSWER Before Which of the following is not an example of rigging equipment? - ANSWER Crane Which of the following is not a method of securing stacked materials? - ANSWER Leave nails in when stacking wood Chemicals are classified as health hazards when they pose which of the following hazardous effects? - ANSWER All of the above When left on the floor, which of these will create tripping hazards? - ANSWER All of the above What should be placed near stairs, changes in elevation, and floor openings to prevent accidents and injuries? - ANSWER Visual cues It is not safe to carry out work tasks on a walking or working surface that - ANSWER Has inadequate lighting OSHA's mission is to: - ANSWER Protect the safety and health of America's workers The creation of OSHA provided this important right to workers: - ANSWER The right to a safe and healthful workplace A Safety Data Sheet (SDS) gives information about: - ANSWER hazardous chemicals Among the rights related to OSHA recordkeeping, workers have the right to review: - ANSWER The OSHA 300 Log and the OSHA 300A Summary During an OSHA inspection: - ANSWER you have the right to talk with the inspector privately. The right of workers to seek safety and health on the job without fear of punishment is spelled out in: - ANSWER Section 11(c) of the OSH Act. One of the main responsibilities employers have under OSHA is to: - ANSWER Provide training required by OSHA standards OSHA requires that employers pay for most required personal protective equipment (PPE), including: - ANSWER Hard hats The OSHA standards for Construction and General Industry are also known as - ANSWER Part 1926 and Part 1910 What type of OSHA inspection is conducted when immediate death or serious harm is likely? - ANSWER Imminent danger When the employer receives an OSHA citation, it must be: - ANSWER Posted for 3 days or until the violation is fixed If you feel that an OSHA inspection is needed to get hazards corrected at your workplace, which is your best option? - ANSWER Submit a written, signed complaint with specific hazard information.