Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA 30 Hour Training: Multiple Choice Questions and Answers, Exams of Training and Development

A series of multiple choice questions and answers related to osha 30-hour training. It covers various topics such as workplace safety, hazard identification, personal protective equipment, and emergency procedures. The questions are designed to test knowledge and understanding of osha regulations and best practices for workplace safety.

Typology: Exams

2024/2025

Available from 12/22/2024

Academicmaterials
Academicmaterials 🇺🇸

1.5K documents

Partial preview of the text

Download OSHA 30 Hour Training: Multiple Choice Questions and Answers and more Exams Training and Development in PDF only on Docsity!

OSHA 30 Hr Training

among rights related to OSHA recordkeeping, workers have right to review - ✔️ ✔️ OSHA 300 log and OSHA 300A summary

among ways workers can protect themselves when working on or near construction zone is to ____ - ✔️ ✔️ wear high visibility clothing

____ provide for safe and efficient movement of vehicles, bicyclists, and pedestrian zones while protecting workers and equipment - ✔️ ✔️ traffic control signs

____ scaffolds consist of one or more platforms supported by outrigger beams, brackets, poles, legs, uprights, posts, frames, or rigid support - ✔️ ✔️ supported

accident prevention tags used instead of accident prevention signs - ✔️ ✔️ false

acronym describing proper use of fire extinguisher is - ✔️ ✔️ PASS

addition to OSHA regulations, helicopter cranes must comply with regulation of ____ - ✔️ ✔️ federal aviation administration

____ are deadliest excavation hazards - ✔️ ✔️ cave ins

____ caused by repetitive motions or repeated shocks over periods of time - ✔️ ✔️ carpal tunnel syndrome

____ for light, heat, or power must be installed and maintained - ✔️ ✔️ electrical wiring and equipment

all ____ designed to accommodate guards must be equipped with properly functioning guards when in use - ✔️ ✔️ power operated tools

all hand held power tools should have guards and ____ on them - ✔️ ✔️ safety switches

appropriate switches for belt sanders are - ✔️ ✔️ momentary contact on/off switch

as load is mechanically lifted materials - ✔️ ✔️ may strike workers if load swings, twists, or turns

basic worksite analysis performed by industrial hygienist includes - ✔️ ✔️ all of above

benefits of well designed ergonomic work environment is low operating costs - ✔️ ✔️ true

bodily injury due to slips and falls considered physical hazard from conditions involving - ✔️ ✔️ surface residues

caught in or between hazards are related with excavations therefore hazard considered to be greatest risk is - ✔️ ✔️ cave ins

caution tag should be white with letters on black background - ✔️ ✔️ false

common drinking cup is ____ in working place - ✔️ ✔️ prohibited

commonly cited hazard for stairways and ladders is - ✔️ ✔️ all of above

competent person capable of identifying existing and predictable hazards in surroundings or working conditions unsanitary, hazardous, or dangerous to employees, and has authorization to take prompt measures - ✔️ ✔️ true

competent persons not necessary when scaffolds are being moved - ✔️ ✔️ false

compressed air used for cleaning if as long as less than 30 psi - ✔️ ✔️ true

concrete mixers with greater than 1 cubic yard capacity must have guardrails each side of skip - ✔️ ✔️ true

crane or derrick inspection carried out - ✔️ ✔️ prior to each use

creation of OSHA provided this important right to workers - ✔️ ✔️ right to a safe and healthful workplace

current carrying parts that pass outer surfaces of jaws of manual electrode holder must - ✔️ ✔️ all of above

danger sings only be used - ✔️ ✔️ in an immediate hazard area

distance from point of fire protected area to nearest fire extinguisher must not exceed ____ feet - ✔️ ✔️ 100

during OSHA inspection - ✔️ ✔️ right to talk to inspector privately

duties required by stairway and ladder rules must be performed ____ employees begin work that requires stairways or ladders and fall protection systems - ✔️ ✔️ before

electrocution was second leading cause of workers deaths in 2011 - ✔️ ✔️ true

employees may file complaint with OSHA if unsafe working conditions not corrected - ✔️ ✔️ true

employees performing work from scaffold must be trained on use, maximum load capacity, and electrical hazards - ✔️ ✔️ true

employees protected from discrimination when reporting work related injury, illness, or fatality - ✔️ ✔️ true

employees required to enter confined space instructed on - ✔️ ✔️ all of above

employees should not be ____ jack during tensioning operations - ✔️ ✔️ behind

employers are not required to enforce lockout/tagout safety related works practices - ✔️ ✔️ false

employers must not place construction loads on concrete structures or portions of concrete structures unless qualified person determines structure or portion of structure is capable of supporting loads - ✔️ ✔️ true

employers need to have rescue procedures in place in event of fall - ✔️ ✔️ true

employers protect workers from struck by hazards by ____ - ✔️ ✔️ providing PPE such as hard hats and safety glasses

employers required to keep worksites free from - ✔️ ✔️ all the above

entry and exit time can be physical limitation - ✔️ ✔️ and directly relates to potential hazards in confined space

example of struck by flying hazard - ✔️ ✔️ hit by nail from a nail gun

excavations over ____ feet in depth designed by registered professional engineer - ✔️ ✔️ 20

exit signs have red letters 1 inch high - ✔️ ✔️ false

eye and face protection for employee use must identify - ✔️ ✔️ manufacturer

fall protection must be provided to workers working on surfaces with unprotected sides and edges ____ above lower level - ✔️ ✔️ 6 feet

falls to lower level are major cause of fatalities - ✔️ ✔️ true

falls, struck by object, caught in or between, and electrocution referred to as - ✔️ ✔️ focus four

fire alarms consist of which - ✔️ ✔️ all of above

fire not considered hazard associated with excavations - ✔️ ✔️ false

fire watchers are personnel assigned to work area when normal ____ are not sufficient - ✔️ ✔️ fire prevention precautions

first choice to reduce or eliminate hazard is - ✔️ ✔️ engineering controls

first step in developing comprehensive safety and health program including personal protective equipment is to - ✔️ ✔️ perform hazard assessment

fixed ladders without cages or wells must have 15 inch clear width to nearest permanent object on each side of centerline - ✔️ ✔️ true

fixed, power driven woodworking tools not required to be provided with disconnect switch that can be locked or tagged in off position - ✔️ ✔️ false

flagger not need to be clearly visible to first approaching road user at all times - ✔️ ✔️ false

following classified as confined space - ✔️ ✔️ A and C

footwear designed to be electrically conductive or non conductive - ✔️ ✔️ safety shoes

for quick closing, valves of fuel gas cylinders should not be opened more than 1 and 1/ turns - ✔️ ✔️ true

for workers on scaffolds, fall protection provided if working _____ above lower level - ✔️ ✔️ 10 feet

fuel gas and oxygen hoses must - ✔️ ✔️ be easily distinguishable

general requirements do not apply to slings used in conjunction with other material handling equipment for movement of material by hoisting - ✔️ ✔️ false

gloves offer pliability and protection against harmful elements such as hydraulic fluids, gasoline, and alcohols - ✔️ ✔️ neoprene

gong or effective audible warning signal provided for - ✔️ ✔️ gantry cranes

hazards specific to confined space categorized as - ✔️ ✔️ all of above

helicopter cranes used to - ✔️ ✔️ all of above

how high must top guardrail be above working surface - ✔️ ✔️ 42 inches plus or minus 3 inches

if employee needs eye protection wears prescription lenses, should - ✔️ ✔️ A and B

if employee provides own protective equipment, employee responsible for - ✔️ ✔️ none of above

if employee uses respirator, employer should have - ✔️ ✔️ written respiratory program

if hard hat sustains heavy blow from falling or flying object you ____ - ✔️ ✔️ must replace immediately

if hard hat sustains impact, should - ✔️ ✔️ be replaced

if ladder used where worker exposed to energized electrical equipment, required that ladder has ____ and is in proper position to avoid possible electrical hazard - ✔️ ✔️ non conductive siderails

if prime contractor subcontracts work on construction project to another firm, which firm is responsible for "employer obligations" in 1926 Subpart B - ✔️ ✔️ prime contractor

if total length of climb on fixed ladder equals or exceeds 24 feet, fixed ladders must be equipped with - ✔️ ✔️ ladder safety device

if you feel OSHA inspection is needed to get hazards corrected, which is best option - ✔️ ✔️ submit written, signed complaint with specific hazard info

impact tools, such as chisels, with ____ heads should be removed from use - ✔️ ✔️ mushroom

incompliant tools must be which - ✔️ ✔️ all of above

indoor storage of flammable materials requires - ✔️ ✔️ all of above

industrial hygienist identifies exposures, problems, tasks, and risks of workplace by performing - ✔️ ✔️ worksite analysis

inspect scaffolds and components for visible defects before work shift and after occurrence that could affect scaffolds integrity - ✔️ ✔️ true

installation of live booms on hoists recommended - ✔️ ✔️ false

interior hung suspension scaffold consists of platform suspended from ceiling or roof by fixed length supports - ✔️ ✔️ true

it is permissible to enter excavation to get soil sample - ✔️ ✔️ false

it's ok to use extension cords with worn insulation - ✔️ ✔️ false

jacks must be inspected - ✔️ ✔️ all of above

jointers fitted with which types of guards - ✔️ ✔️ point of operation guards

ladders can be tied or fastened to create longer sections even if not designed for that purpose - ✔️ ✔️ false

lead exposure can cause all of following except - ✔️ ✔️ skin burns

lifting inserts embedded or otherwise attached to precast concrete members, other than tilt up members, be capable of supporting at least ____ times maximum intended load applied or transmitted to them - ✔️ ✔️ four

limited access zone of masonry wall must be which - ✔️ ✔️ all of above

log of work related injuries and illnesses referred to as form number - ✔️ ✔️ OSHA 300

main responsibilities employers have under OSHA is to - ✔️ ✔️ provide training required by OSHA standards

make sure all loads carried by equipment are stable and ____ - ✔️ ✔️ secured

masonry saw must be guarded with semicircular enclosure over blade - ✔️ ✔️ true

maximum safe load limits of ____ must be posted in buildings and structures - ✔️ ✔️ floors

means of access must be provided to scaffold platform if no existing access within ____ feet - ✔️ ✔️ 2

minimum clearance between crane and power line rate at 50 kV or below must be 10 feet - ✔️ ✔️ true

more ____ killed from falls than any other construction occupation - ✔️ ✔️ ironworkers

non self supporting and self supporting portable ladders should support at least ____ times max load - ✔️ ✔️ 4

not every walking or working surface can be potential fall hazard - ✔️ ✔️ false

occupations where exposure to ionizing radiation, time, distance, and ____ are important in worker safety - ✔️ ✔️ shielding

one capable of identifying existing and predictable hazards in surroundings and has authorization to take corrective measures to eliminate them is - ✔️ ✔️ competent person

OSHA requires employers pay for required PPE including - ✔️ ✔️ hard hats

OSHA standards for construction and general industry also known as - ✔️ ✔️ part 1926 and part 1910

OSHA's mission is to - ✔️ ✔️ protect safety and health of America's workers

overreaching is factor that contributes to falls or fatalities involving ladders - ✔️ ✔️ true

person capable of identifying existing and predictable hazards in surroundings or working conditions which are unsanitary, hazardous, or dangerous, and has authorization to take corrective measures to eliminate them is - ✔️ ✔️ competent person

personal fall arrest system consists of - ✔️ ✔️ anchorage, lanyard and connectors, and full body harness

personal fall arrest system of worker on personnel platform must be attached to - ✔️ ✔️ any of above

personal fall arrest systems inspected for damage ____ each use - ✔️ ✔️ before

platform must be fully planked and at least 18 inches wide - ✔️ ✔️ true

powder actuated tools should never be used on ____ materials - ✔️ ✔️ brittle

precautions taken to prevent exposure to atmospheres less than 19.5% oxygen - ✔️ ✔️ true

preservative coatings considered highly flammable when scrapings burn with rapidity - ✔️ ✔️ true

primary types of protective systems are sloping, benching, shoring, and shielding - ✔️ ✔️ true

protective systems selected and constructed by employer, who is free to choose any design, regardless of required performance criteria - ✔️ ✔️ false

providing worker training on safe use of equipment being operated is responsibility of - ✔️ ✔️ employer

rated load capacities, recommended operating speeds, and special hazards or instructions must be posted - ✔️ ✔️ on all equipment

regulatory signs inform road users of ____ - ✔️ ✔️ all of above

repaired wire rope is acceptable for use on suspended scaffolds - ✔️ ✔️ false

respiratory protection equipment approved by - ✔️ ✔️ NIOSH

rigging equipment must be inspected ____ each lift - ✔️ ✔️ prior to

right of workers to seek safety and health without fear of punishment is in - ✔️ ✔️ section 11(c) of OSH act

safe lifting training includes - ✔️ ✔️ all of above

safety nets absorb force of 400 lb bag of sand dropping onto net referred to as - ✔️ ✔️ drop test

scaffold accidents attributed to factors like planking or support giving way or lack of guardrails or fall protection - ✔️ ✔️ true

scaffold and component must be capable of supporting own weight and at least ____ times maximum intended load applied - ✔️ ✔️ 4

SDS gives info about - ✔️ ✔️ hazardous chemicals

secondary irritant atmosphere is - ✔️ ✔️ one that may produce toxic effects on body

section 1926.21, safety training and education, states OSHA must create programs that apply to employers and employees - ✔️ ✔️ true

silica exposure in form of dust particles only harmful if worker exposed for long periods of time - ✔️ ✔️ true

spoil piles and equipment kept at least ____ feet back from edge of excavation - ✔️ ✔️ 2

stairrails installed after March 15, 1991 must be no less than 36 inches - ✔️ ✔️ true

stairways must be installed at least ____ degrees, but no more than ____ degrees from horizontal - ✔️ ✔️ 30,

struck by ____ object hazards exist when something is propelled, hurled, or thrown - ✔️ ✔️ flying

struck by hazard described as anytime worker ____ - ✔️ ✔️ is hit by falling, swinging, flying, or rolling object

stuck by injuries produced by forcible contact or impact between injured person and ____ - ✔️ ✔️ object or piece of equipment

Subpart C, how often should combustible scrap and debris be removed from site - ✔️ ✔️ regular intervals

subpart q, which personal protective equipment required when employee applies cement/sand/water mixture through hose - ✔️ ✔️ head and face equipment

support for precast concrete removed when permanent connections are completed - ✔️ ✔️ true

temporary traffic control signs divided into three categories - ✔️ ✔️ true

test performed on abrasive wheels - ✔️ ✔️ ring test

these types of contaminants result from welding, cleaning, or painting - ✔️ ✔️ gas or vapor

to control traffic flow and protect workers near roadways and moving equipment you could use - ✔️ ✔️ all of above

to decrease likelihood of fire hazard, employers implement non mandatory precautions including - ✔️ ✔️ fire watch and hot work permits

to prevent being pinned between equipment or other objects, would should avoid ____ - ✔️ ✔️ placing themselves between moving vehicles and immovable structure, vehicle, or stacked materials

to protect against caught in or between hazards worker should avoid wearing loose clothing or jewelry and - ✔️ ✔️ working with equipment/machinery that has not been locked out

tools that run on liquid fuel are powered by - ✔️ ✔️ gasoline

top of ladder must extend ____ above surface you're climbing onto - ✔️ ✔️ 3 feet

torches must be - ✔️ ✔️ all of above

transferring by means of air pressure on container or portable tanks is prohibited - ✔️ ✔️ true

traveling on forklift, carried load must be at highest position during travel - ✔️ ✔️ false

type c soil is least stable - ✔️ ✔️ true

type III barricades used to close or partially close road - ✔️ ✔️ true

type of confined space used for storage of water and chemicals - ✔️ ✔️ tank

type of correctional program used to plan best way to control or prevent hazards in event of emergency - ✔️ ✔️ emergency preparation

type of OSHA inspection conducted when immediate death or serious harm is likely - ✔️ ✔️ imminent danger

used lumber must have what withdrawn before stacking - ✔️ ✔️ nails

using crane to suspend workers on personnel platform, loaded platform and rigging must not exceed 50% of rated capacity for crane - ✔️ ✔️ true

ways employer can protect workers from falls - ✔️ ✔️ guardrails, safety net systems and personal fall arrest systems

webbing used for lifeline and lanyard harness ropes and straps must be made of ____ fibers - ✔️ ✔️ synthetic

wet or damp conditions worsen electrocution hazards - ✔️ ✔️ true

what type of soil cannot be benched - ✔️ ✔️ type c

when controls used to reduce level of atmospheric contaminants to acceptable levels, testing conducted ____ to ensure atmosphere remains safe - ✔️ ✔️ as often as necessary

when cylinders transported by powered vehicles, must be secured in ____ position - ✔️ ✔️ vertical

when difficult for operator to determine power line clearance by visual means, observer not necessary - ✔️ ✔️ false

when disposal materials dropped more than 20 feet to exterior location, enclosed chute must be used - ✔️ ✔️ true

when employer receives OSHA citation it must be - ✔️ ✔️ posted for 3 days or until violation is fixed

when energized conductor made contact with ladder, path to ground included worker's body resulting in death, which contributed to electrocution - ✔️ ✔️ all of above

when should OSHA annual summary be posted - ✔️ ✔️ between Feb 1 and April 30 of next year

when standard orange flags or flashing warning lights used in conjunction with signs, must not block sign face - ✔️ ✔️ true

when using industrial forklifts, load must be at lowest position for traveling, and truck manufacturer's operational requirements must be followed - ✔️ ✔️ true

when ventilation cannot be obtained without blocking means of access, employees in confined space protected by ____ - ✔️ ✔️ air line respirators

when ventilation cannot be obtained without blocking means of access, employees protected by - ✔️ ✔️ airline respirator

which are employer requirements for safety training and education - ✔️ ✔️ all of above

which are part of PPE that prevent electrocution - ✔️ ✔️ all of above

which are preventative measures taken to protect from electrocution hazards - ✔️ ✔️ a and c only

which are required to use fabricated frame scaffolds - ✔️ ✔️ all of above

which are ways employers protect employees on job sites - ✔️ ✔️ all of above

which can reduce commons hazards found in welding and cutting operations - ✔️ ✔️ thoroughly training employees and supervisors

which determines when formwork can be removed from cast in place concrete - ✔️ ✔️ employer

which is best place to store flammable and combustible liquids - ✔️ ✔️ both b) and c)

which is not requirement for open yard storage driveways - ✔️ ✔️ driveways must be made of sand

which is principal source of compensable injuries in American work force - ✔️ ✔️ manual material handling

which is proper way to move cylinder by hand - ✔️ ✔️ tilt and roll along bottom edge

workers should not work in unprotected trench 5 feet deep or more, type of protection installed may be sloping or benching, trench box or shield, and ____ - ✔️ ✔️ shoring

workers should wear ____ if required, to avoid being thrown from vehicle and crushed as vehicle tips - ✔️ ✔️ seatbelt

working over dangerous equipment and machinery, fall protection provided ____ - ✔️ ✔️ regardless of distance

which is required for inclusion on synthetic webbing label - ✔️ ✔️ all of above

which must employees be trained on - ✔️ ✔️ all of above

which procedure helps ensure equipment doesn't accidentally reenergize when being repaired or worked on - ✔️ ✔️ lockout/tagout

which types of hard hats are not ANSI approved - ✔️ ✔️ bump hats

wire rope sling with strength 10,000 pounds and total working load 2,000 pounds has design factor (multiplier) of ____ - ✔️ ✔️ 5

worker was removing metal antenna when received fatal shock, which measures could have been taking to prevent accident - ✔️ ✔️ both of above could have prevented accident

which is not category of electrical burns - ✔️ ✔️ shock

which is not OSHA standard for proper use of scaffolds - ✔️ ✔️ scaffolds can be loaded in excess of maximum intended rated capacity

which is not part of fire tetrahedron - ✔️ ✔️ carbon dioxide

which is not required of management when developing and maintaining safety program

  • ✔️ ✔️ instruct all employees about confined spaces even if it is not part of their duties