Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA 510 Exam Questions and Answers: A Comprehensive Guide to Workplace Safety, Exams of Workplace Safety

A comprehensive set of questions and answers related to osha 510 regulations, covering key aspects of workplace safety and health. It explores topics such as accident prevention, personal protective equipment, hazard identification, and emergency procedures. Designed to help individuals prepare for osha 510 exams and gain a deeper understanding of workplace safety standards.

Typology: Exams

2023/2024

Available from 12/16/2024

Nursingtutor1
Nursingtutor1 🇺🇸

402 documents

Partial preview of the text

Download OSHA 510 Exam Questions and Answers: A Comprehensive Guide to Workplace Safety and more Exams Workplace Safety in PDF only on Docsity!

OSHA 510 Exam Questions and Answers

100% Correct.

The results of workplace injuries and illnesses may include - ANSWER-lower morale and increased costs to train replacement workers. OSHA's mission is to - ANSWER-protect the safety and health of America's workers. The right of workers to seek safety and health on the job without fear of punishment can be found in - ANSWER-Section 11(c) of the OSH Act. Horizontal standards apply when - ANSWER-a condition is not covered by a specific industry standard. The purpose of OSHA Directives, including Enforcement and Compliance Directives (CPL), is to - ANSWER-ensure consistent enforcement of OSHA regulations. OSHA requires that employers certify that abatement is complete - ANSWER-for each cited violation. Creating employer failed to inform employees, other than its workers, of the damaged guardrail - ANSWER-would result in a "creating" employer receiving a citation under OSHA's multi-employer citation policy for damaging a guardrail exposing all employees to a fall hazard. In addition to the presentation of credentials, the inspection process includes - ANSWER-the opening conference, the walk around inspection, and the closing conference. As a result of a work-related illness or injury, _____ , would be classified as restricted work activity (not including the day the illness or injury began. - ANSWER-days the employee was only able to work a partial work shift In OSHA Recordkeeping, an incidence rate is - ANSWER-the number of recordable injuries and illnesses per 100 full-time workers. Managers should _____ to demonstrate management leadership and commitment to safety and health. - ANSWER-be an example by knowing and following the rules employees are expected to follow The two main components of an employer's accident prevention responsibilities required by 1926.20(b) a - ANSWER-safety and health program and jobsite inspections by a competent person.

The maximum travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed - ANSWER-75 feet Accident prevention signs such as; danger, caution and exit signs shall be _____ when work is being performed - ANSWER-visible When stopping a fall, a personal fall arrest system shall bring an employee to a complete stop and limit the maximum deceleration distance to - ANSWER-3.5 feet All hand and power tools, whether paid for by the employer or employee, shall be - ANSWER-maintained in a safe condition A person who has a recognized degree, certificate, or professional standing or who has demonstrated his/her ability to solve problems relating to specific work is a - ANSWER- qualified person Whenever practicable, all arc welding and cutting operations shall be _____ to protect employees and other persons working in the vicinity. - ANSWER-shielded Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of oxygen can - ANSWER-result in fire or explosion Personal fall arrest systems, when stopping a fall, shall be rigged such that - ANSWER- an employee cannot free fall more than 6 feet or contact any lower level. When mechanical equipment is being used perpendicular to the roof edge, the warning lines cannot be closer than - ANSWER-10 feet It is the _____ responsibility to initiate and maintain accident prevention programs to comply with all applicable standards. - ANSWER-employers An "Assured equipment grounding conductor program" deals with the cord-set and receptacles which are - ANSWER-not part of the permanent wiring of the building or structure. _______ is the maximum voltage before guarding is required against accidental contact by cabinets, other forms of enclosures, or by location in a room or enclosure accessible only to qualified persons (electricians). - ANSWER-50 Volts or greater The practice of connecting two metallic objects to prevent static sparks is called - ANSWER-bonding Before the start of any work covered under Subpart V - Power Transmission and Distribution, - ANSWER-existing conditions are determined by an inspection or a test.

OSHA requires that scaffolding being erected, moved, dismantled or altered be supervised by - ANSWER-competent person According to 1926.502(b)(1), the top rail of a guardrail system must be a height of ____ inches +/- 3 inches above the walking/ working level - ANSWER- A material chute used during demolition operations must be enclosed when its angle is equal to or greater than ______ degrees from the horizontal - ANSWER- ______ is a "Type B" Soil. - ANSWER-Sandy clay loam having unconfined compressive strength of 1.2 TSF ______ is the trigger height when the masonry walls must be braced? - ANSWER-8 feet On temporary stairs, handrails (to provide adequate handholds for employees grasping to prevent falling) shall have a minimum clearance of _____ inches between the handrail and the walls - ANSWER- When a masonry wall is being constructed, a limited access zone at least the height of the wall plus a minimum of _____ tall shall be established on the side of the wall without scaffolding. - ANSWER-4 feet Except for extra-heavy-duty metal or plastic portable ladders, all portable ladders must support _____ times the maximum intended load. - ANSWER- A controlled decking zone can only be used as fall protection up to a maximum height of

  • ANSWER-30 feet Type A soil can be sloped at a 1⁄2:1 ratio if the excavation is open less than 24 hours and is less than_____ in depth. - ANSWER-12 feet Portable ladders with structural defects such as, broken or missing rungs or split rails shall be - ANSWER-removed from service until repaired. Cross bracing on a scaffold is only acceptable as a mid-rail when the crossing point of the two braces is between ______ inches above the work platform and end points are less than 48 inches apart. - ANSWER-20 and 30 Rigging equipment for material handling shall be inspected - ANSWER-prior to use on each shift and as necessary during use. ______ must have the authority to stop and refuse to handle crane loads until a qualified person has determined that safety has been assured? - ANSWER-Cran operator

During crane operations when signaling is required, if the signals are interrupted the crane operator should - ANSWER-safely stop operations requiring signals until they are reestablished. _____ is responsible to train signal persons to meet the 1926.1428 standard. - ANSWER-The employer The material used in rollover protection structures must have the capability of performing at - ANSWER-0 degrees F The operator training requirements for rough-terrain industrial trucks used in the construction industry are covered under OSHA standard - ANSWER-1910.178 Powered Industrial Trucks Eye and face protection equipment used to protect against hazards shall meet the requirements specified in - ANSWER-ANSI Z87. The correct hierarchy for controlling overexposure to chemical hazards is - ANSWER-1. Engineering controls,

  1. Administrative controls, 3. Personal protective equipment. Respirators used in the construction industry are covered under OSHA standard - ANSWER-1910.134. In the absence of an infirmary, clinic, hospital, or doctor that is reasonably accessible in terms of time and distance from the worksite, the employer shall make sure a _______ is available at the worksite. - ANSWER-person with a valid certificate in first aid training According to OSHA, portable containers used to provide drinking water shall be - ANSWER-tightly closed and equipped with a tap. ______ contaminants is toxic to both male and female reproductive systems and can create significant exposures to workers removing paint from bridges, renovating residences, and demolishing or salvaging structures. - ANSWER-Lead