Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA Basic Orientation Plus| 100 Questions with Answers 100% Correct| Updated 2024, Exams of Environmental Science

OSHA Basic Orientation Plus| 100 Questions with Answers 100% Correct| Updated 2024 a system designed to minimize injury from falling when the work height is 6 feet or greater Answer: OSHA Occupational Safety & Health Administration Answer: Hazard Prevention and Control Which of the following is a key element to recognizing hazards Answer: Management Commitment and Employee Involvement Which of the following is a key element to recognizing hazards Answer: Worksite Analysis Which of the following is a key element to recognizing hazards Answer: Safety and Health Training Which of the following is a key element to recognizing hazards Answer: Clarifying a problem or doubt You are encouraged to ask your supervisor for information whenever you have a problem or are in doubt about what to do on a job Answer: Safety Regulation It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition; report all injuries (no matter how minor they seem); and wea

Typology: Exams

2023/2024

Available from 01/18/2024

paul-marks
paul-marks 🇺🇸

3.7

(31)

976 documents

Partial preview of the text

Download OSHA Basic Orientation Plus| 100 Questions with Answers 100% Correct| Updated 2024 and more Exams Environmental Science in PDF only on Docsity!

OSHA Basic Orientation Plus| 100 Questions

with Answers 100% Correct| Updated 2024

Answer: Fall Protection a system designed to minimize injury from falling when the work height is 6 feet or greater Answer: OSHA Occupational Safety & Health Administration Answer: Hazard Prevention and Control Which of the following is a key element to recognizing hazards Answer: Management Commitment and Employee Involvement Which of the following is a key element to recognizing hazards Answer: Worksite Analysis Which of the following is a key element to recognizing hazards Answer: Safety and Health Training Which of the following is a key element to recognizing hazard s Answer: Clarifying a problem or doubt You are encouraged to ask your supervisor for information whenever you have a problem or are in doubt about what to do on a job Answer: Safety Regulation

It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition; report all injuries (no matter how minor they seem); and wear the proper personal protective equipment Answer: PPE Personal Protective Equipment Answer: Danger Signs Used only where an immediate life threatening hazard exists Answer: Barricade Obstacles that discourage the passage of persons or vehicles Answer: Warning Signs Used where immediate non-life threatening hazards exist Answer: Barriers Physical devices that are designed to prevent entry into an area where hazards are present Caution Signs Used to warn against potential hazards or to caution against unsafe practices Bending Whan lifting or setting down a load, bend at the knees Injury

If you experience pain or discomfort as a result sof your work activities, you should report it to your supervisor as soon as possible Human Immunodeficiency virus (HIV) common disease caused by bloodborne pathogens in the workplace Hepatitis B virus (HBV) common disease caused by bloodborne pathogens in the workplace Hepatitis C virus (HCV) common disease caused by bloodborne pathogens in the workplace Universal Precautions an infection control approach where you treat all blood and body fluids as if they are known to be infectious for bloodborne pathogens GHS Globally Harmonized System of Classification and Labeling of Chemicals GHS 5 Least severe rating GHS 1 Most severe rating Fire (NFPA) Red Health (NFPA)

Blue Reactivity (NFPA) Yellow Other hazards and special precautions (NFPA) White HMIS Hazardous Material Identification System NFPA National Fire Protection Association Health (HMIS) Blue Red (HMIS) Flammability Orange (HMIS) Physical Hazard White (HMIS) Required personal protective equipment SDS Safety Data Sheet Personal Protective Equipment (PPE)

Gear to protect workers from hazards Administrative controls Change how employees do their jobs Engineering Controls Change the actual work environment Rotating Machinery drill presses, circular saws, fans, shafts, belts PPE - Personal Protective Equipment eye, face, head, hand, body foot protection FRC Fire-retardant clothing PPE Must fit properly, be comfortable, provide a greater level of protection than is necessary PPE not to use Never use damaged or defective PPE Oxygen deficient An atmosphere that oxygen level falls below 19.5% White Cartridge used for Acid gases Black Cartridge

used for organic vapors Yellow Cartridge used for acid and organic vapors Magenta (purple) cartridge used for Ammonia gas Air-purifying respirators (APRs) Supply clean breathing air from an external source Atmosphere-supplying respirators Filter out particulates or chemically absorb relatively small amounts of toxic vapors or gases, but are only effective against a specific chemical or class of chemical Respirator Wear and Use Before wearing respiratory protection you must have a medical evaluation and fit test. Respirator Maintenance and Care Clean respirator after each use, properly store your respirator, inspect and repair when necessary SCBA (Scenario) A chlorine leak was reported from a gas cylinder, weighing about 650 kg, which affected laborers, port workers, and fire fighters

Filtering Facepiece (scenario) An employee in a grain mill is exposed to dust generated from wheat, oats, and barley. Grain dust is a complex mixture of husk particles, cellulose hairs and spikes, starch granules, spores of fungi, insect debris, pollens, and rat hair. Supplied Air (SAR) (scenario) An employee applying a primer that contains 1,1,1-trichloroethane to the inside concrete walls of a 5'x5' planter boxes with varying depths of 8', 12' and 16' Gas and Vapor (scenario) An employee was exposed to anhydrous ammonia at the permissible exposure limit from a pressure relief valve while working from a scaffold on a corridor outside of a building NIHL Noise-Induced Hearing Loss is a temporary hearing impairment resulting from prolonged exposure to high levels of noise. Hearing Protection required when you are exposed to noise over 85 decibels Ear Plugs Hearing Protection Device Ear muffs Hearing Protection Device

Non-Qualified Person (electrical) has little or no training in identifying electrical hazards Qualified Person (electrical) has received training in and has proven skills and knowledge in the construction and operation of electric equipment Arc Flash occurs when a flashover of electric current leaves its intended path and travels through the air to ground or from one conductor to another Current (electrical) The factor that determines the severity of electrical shock Ground Fault Circuit Interrupter (GFCI) Monitors the amount of current flowing from hot to neutral and trips the circuit if an imbalance happens Grounding Safety measure that provides a continuous pathway for electrical energy to travel from a conductor or source of energy to the earth Bonding Provides a continuous pathway for electrical energy to travel from one conductor to another GFCI's (requirements)

Electricity is used near water, the user of electrical equipment is not grounded, circuits are providing power to portable tools or outdoor receptacles, temporary wiring or extension cords are used lockout/tagout a safe work practice intended to protect you from the accidental start up of machinery or equipment or unexpected release of hazardous energy Hazardous Energy hydraulic, chemical, electrical Authorized employee (lockout/tagout) Person who locks or tags out machines or equipment in order to perform service or maintenance on that machine or equipment Affected employee (lockout/tagout) Worker who operates the equipment being serviced or maintained or works in an area where the servicing or maintenance takes place Other employee (lockout/tagout) Those whose work operations are or may be in an area where energy control procedure are being used Lockout/ tagout order (step 1) Preparation for shutdown lockout/tagout order (step 2)

Machine or equipment isolation lockout/tagout order (step 3) Machine or equipment shutdown lockout/tagout order (step 4) lockout or tagout device application lockout/tagout order (step 5) release stored energy lockout/tagout order (step 6) verification of isolation Group Lockout each authorized employee will apply a personal lockout/tagout device to a group lockbox and remove it once the maintenance/repair work is complete. Floor Hole Opening in the floor, platform or pavement measuring less than 12 inches, but more than 1 inch through which materials, but not people may fall Floor Opening Opening in the floor, platform or pavement measuring 12 inches or more, and through which people may fall Standard Railing

vertical barrier erected along exposed edges of a floor opening, wall opening, ramp, platform, or runway to prevent falls of persons Toe Board Vertical barrier at floor level erected along exposed edges of a floor opening, wall opening, platform, runway, or ramp to prevent falls of materials Metal Ladders Never use near electrical equipment 4: angle ratio of a non-self supporting ladder Minimize Falls when climbing a ladder always maintain three points of contact Basic Fall Arrest System includes anchorage, a full-body harness, and a connecting device Scaffold user worker who performs work from a scaffold scaffold erector worker who is trained to erect, modify, and dismantle scaffolding competent person (scaffold) one who is capable of identifying existing and predictable hazards in the surroundings or working conditions, which are unsanitary, hazardous to

employees, and who has the authorization to take prompt corrective measures to eliminate them qualified person (scaffold) someone who has a recognized degree, certificate or professional training, or who has extensive knowledge, training and experience and who has demonstrated his or her ability to solve problems related to the subject matter or work In an emergency, you should call emergency response with the: exact location of the incident, number of victims, and any special hazards at the location JSA Job Safety Analysis Emergency Evacuation always travel downwind and crosswind from any release Everyone has a responsibility to read and understand the Emergency Action Plan Fire Elements Heat, Fuel, Oxygen Explosive substance that has a tendency to explode, resulting in a sudden and violent release of energy that can be extremely destructive

Olfactory refers to the sense of smell Pyrophoric a chemical that is capable of self-ignition (spontaneously) when it is exposed to air Toxic substance that is harmful to human health, poisonous