OSHA Basic Orientation Plus (52 Questions and Correct Answers) Latest 2024/2025, Exams of Nursing

Download OSHA Basic Orientation Plus (52 Questions and Correct Answers) Latest 2024/2025 and more Exams Nursing in PDF only on Docsity!

OSHA Basic Orientation Plus

1. What is the most frequently cited OSHA violation? ANSWER : Fall Protection
2. What key elements are essential to recognizing hazards and reducing or eliminating workplace hazards? ANSWER : Management commitment and employee involvement
3. You are encouraged to ask your coworkers/supervisor for information whenever you have a problem or are in doubt about what to do on a job? ANSWER : True
4. It is your responsibility to follow all safety regulations, inform your employer of any unsafe condition; report all injuries no matter how minor they seem and wear the proper personal protective equipment? ANSWER : True
5. The OSHA standard that addresses the requirements for preventing and lessening the results of a bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process ANSWER : Process safety management Standard
6. The process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are used to identify and evaluate major processes and ensure they are ANSWER : Evaluated, Controlled, and Identified
7. In the PSM standard OSHA states employees must be trained if they work with highly hazardous chemicals. ANSWER : True
8. Facilities are not permitted to control your entrance and exit in covered process areas. ANSWER : False
9. What should be your first concern from the moment you enter the work site? ANSWER : Safety
10. Under the Stop Work Authority, you have the right and obligation to stop a work activity if you have reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is not clearly established or understood. ANSWER : True
11. What's needed in order to operate a plant owned vehicle or mobile equipment while at a facility ANSWER : qualified only authorized only

12. What type of work permits you may encounter on the job ANSWER : safe work permits confined space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout permits
13. if you are replacing a piece of equipment the new one should be the same as the one being removed. If its not you should find out whether the change was on purpose. what is this called ANSWER : Management of change
14. Used only where an immediate life threatening hazard exists ANSWER : Danger
15. Used where immediate non life threatening hazards exist ANSWER : Warning Sign
16. Used to warn against potential hazards or to caution against unsafe practices ANSWER : Caution signs
17. Physical devices that are designed to prevent entry into an area where hazards are present. ANSWER : Barriers
18. Obstacles that discourage the passage of persons or vehicles ANSWER : Barricade
19. When lifting or setting down a load, bend at the ANSWER : Knees
20. If you experience pain or discomfort as a result of your work activities, you should do what? ANSWER : report it to your supervisor as soon as possible
21. What are the most common diseases caused by bloodborne pathogens in the workplace ANSWER : Human Immunodeficiency, Hepatitis B, Hepatitis C
22. Universal precautions is an infection control approach where you treat all blood and body fluids as if they are known to be infectious for bloodborne pathogens only if the injured person is sick ANSWER : False
23. What is the least severe rating in the GHS classification system ANSWER : Four
24. What is the most severe rating in the GHS classification system ANSWER : One

39. narrow excavation made below the surface of the ground in which the depth is usually greater than the width and the width does not exceed how many fee? ANSWER : 15
40. What are the main methods for protecting workers from a cave in ANSWER : Shielding, Sloping, shoring
41. In an emergency you should call emergency response with the ANSWER : Exact location, number of victims
42. Excavation measurements, special hazards at the location
43. What elements are required in order for a fire to happen? ANSWER : Heat, fuel, oxygen
44. What color does white represent under the NFPA label ANSWER : Other hazards and special precautions
45. what is used on scaffolding after inspections are completed ANSWER : Scaffold tags
46. what are base plates and mudsills used for? ANSWER : Distribute scaffold load weight
47. What is performed regularly at job sites ANSWER : Inspections
48. What are four main types of scaffolds ANSWER : Frame, rolling, tube, system
49. A vertical barrier at floor level erected along exposed edges of a floor opening wall opening, platform, runway, or ramp to prevent falls of materials. ANSWER : Toe board
50. what is an opening in the floor, platform or pavement measuring 12 inches or more and through which people may fall? ANSWER : Floor hole
51. What is an opening in the floor, platform or pavement measuring less than 12 inches but more than one inch through which materials, but not people may fall called? ANSWER : Floor opening
52. what is the first step in lockout/tagout to prevent the unexpected release of energy ANSWER : Preparation for shutdown