PADI Open Water Diver Certification questions with answers 2024, Exams of Physics

Download PADI Open Water Diver Certification questions with answers 2024 and more Exams Physics in PDF only on Docsity!

PADI Open Water Diver Certification

SCUBAcorrect answerSelf contained underwater breathing apparatus What is the pressure change for each 10m/33ft of depth change?correct answer1 bar/1 ata/ atmosphere What is the relationship between my depth in water and the pressure?correct answerThe deeper you go in water, the more the pressure increases Pressure is expressed as the weight of air What is the relationship between pressure, and the volume and the density of air?correct answerAs pressure increases, the gas volume decreases and the gas density increases If I take a volume of air from one depth to another depth, how much will the volume and density change?correct answerVolume will be 1/ata# Density will be ata# What 3 major body air spaces does increasing pressure affect as I descend?correct answerEars, sinuses, mask What is a "squeeze"?correct answerThe discomfort caused by pressure imbalance pulling tissue into the air space What is "equalization"?correct answerThe addition of air to your air spaces as you descend How do I equalize as I descend?correct answerFor ears and sinuses, pinch your nose and blow gently, or wiggle your jaw and swallow For mask, blow into it with nose

How often should I equalize?correct answerEvery meter/few feet, BEFORE you feel discomfort What should I do if I can't equalize?correct answerStop your descent, signal problem and point to your ear, ascend a bit, and try again What can happen if I don't or can't equalize gently and keep descending?correct answerFluid can rupture the eardrum Bruising around the face can occur Why does a congestion from a cold or allergy temporarily keep me from diving?correct answerCongestion might block normal air flow, making equalization difficult or impossible Why should I never dive with earplugs?correct answerThey create air spaces that you can't equalize What other body air spaces are affected by increasing pressure? How do I equalize them?correct answerIn filled teeth - go to a dentist In a dry suit - learn from an instructor Lungs - breathe normally and continuously What is the most important rule in scuba diving?correct answerBreathe continuously and never hold your breath What can happen if I don't follow the most important rule in scuba diving?correct answerYour lungs will over expand and rupture What is a "reverse block"?correct answerWhen expanding air becomes trapped in your body air spaces as you ascend What should I do if I feel discomfort in my ears, sinuses, stomach, intestines, or teeth while ascending? correct answerStop your ascent and descend a meter/few feet to reduce discomfort and give trapped air time to work its way out

How does depth affect how long my air supply lasts?correct answerThe deeper you are, the more dense air you breathe, and the faster you use the air in your cylinder. Compared to the surface, air supply lasts 1/#ata as long along with other factors What's the most efficient way to breathe dense air underwater?correct answerTake slow, deep breaths How do I breathe to reduce anxiety when under stress?correct answerDo NOT breathe faster - keep breathing slowly What are my 4 breathing rules as a scuba diver?correct answer1. Breathe continuously and never hold your breath

2. Breathe slowly and deeply
3. Don't allow yourself to get winded or out of breath
4. If faced with a problem, stop, and reduce anxiety by breathing slowly and deeply What is buoyancy?correct answerAn upward force acting on an object in the water, canceling the pull of gravity What causes buoyancy?correct answerThe upwards force is caused by the water displaced by the object, and is equal to the weight of displaced water positive buoyancycorrect answerThe object weighs less than the water it displaces, so it floats neutral buoyancycorrect answerThe object weighs the same as the water it displaces, neither sinking nor floating negative buoyancycorrect answerThe object weighs more than the water it displaces, so it sinks Why does salt water cause more buoyancy than fresh water?correct answerIt has dissolved minerals in it, so a given volume weighs more than fresh water

What 2 pieces of equipment do I normally use to control buoyancy?correct answerThe weight system and the BCD (buoyancy control device) How does descending affect my buoyancy?correct answerThe volume decreases, reducing buoyancy, so you ADD air to the BC How does ascending affect my buoyancy?correct answerThe volume increases, adding buoyancy, so you RELEASE air from the BC How does breathing affect my buoyancy?correct answerInhaling adds, exhaling reduces What is the buddy system?correct answerDiving with another diver What are the 3 most important considerations in choosing scuba equipment?correct answerSuitability, fit, and comfort How do I generally care for scuba equipment?correct answerRinse everything in fresh water and dry it in the shade and store in a cool, dry place Why do I need a mask?correct answerIt provides an air space so your eyes can focus because light behaves differently underwater Why does my mask need to enclose my nose?correct answerBecause the mask creates an air space, you need your nose to blow in it to equalize it Why do I need a snorkel?correct answerIt saves your air supply while your face is in the water What are 2 basic fin styles?correct answerFull-foot and adjustable strap What consists of your scuba kit?correct answerBuoyancy control device, regulator, air cylinder, weight system

What 5 components make up a BCD?correct answerInflatable bladder, harness/jacket and cylinder band, low pressure inflator (LPI) mechanism, overpressure/quick dump exhaust valve, weight system inflatable bladdercorrect answerControls buoyancy harness/jacket and cylinder bandcorrect answerHolds cylinder on back low pressure inflator (LPI) mechanismcorrect answerInflates bladder with air from your cylinder with the touch of a button overpressure/quick dump exhaust valvecorrect answerVents air if the bladder is overfilled weight systemcorrect answerContain weight pockets that you release and drop in case of emergency What 2 special maintenance considerations do BCDs have?correct answerRinse the inside of the bladder with fresh water, and store them partially inflated to keep the bladder from sticking together What 5 components make up a regulator?correct answerFirst stage, second stage, alternate air source, low pressure inflator (LPI) hose, submersible pressure gauge (SPG) first stagecorrect answerSupplies air to all the other components, connecting to the cylinder valve by screw or clamp, reduces cylinder pressure to intermediate pressure (above surrounding pressure) alternate air sourcecorrect answerAn extra second stage you use for sharing air with a buddy Attaches in triangle area between chin and hips second stagecorrect answerReduces pressure to surrounding pressure, delivers air upon inhalation, vents exhalation Goes over right shoulder low pressure inflator (LPI) hosecorrect answerSupplies air to your BCD inflator

submersible pressure gauge (SPG)correct answerHose that tells you air pressure remaining in your cylinder Goes under left arm What is the most important consideration in choosing a regulator?correct answerThe ease of breathing yoke systemcorrect answerHolds first stage to cylinder with a clamp DIN systemcorrect answerRegulator screws into valve What 3 special maintenance considerations do regulators have?correct answerRinse first stage individually, run water through second stage, have professional overhaul it about every year What 2 components make up a scuba cylinder?correct answerThe aluminum/steel container and the valve to control air flow What is a burst disk?correct answerA safety device that relieves overpressure by rupturing and releasing air What is the most important feature in my weight system?correct answerA quick release that will enable you to float with an uninflated BC Why use more than 1 weight system?correct answerIt will help distribute weight trimcorrect answerThe orientation and balance of a swimmer in the water - the ideal is horizontal danger/hazardcorrect answer okaycorrect answer

go up/end divecorrect answer something's wrongcorrect answer down/descendcorrect answer low on aircorrect answer okaycorrect answer distress/in troublecorrect answer How does being underwater affect the apparent size or distance of things?correct answerRefraction occurs, where light changes direction, and things are magnified by 1/ How does water affect light intensity and color?correct answerIt reflects, scatters, and absorbs light in the roygbiv order As you go deeper, it gets darker How does hearing differ underwater?correct answerIt travels faster and longer How does water's density affect moving in water?correct answerIt takes more energy the faster you try to swim What is "airway control"?correct answerThe skill of breathing past remaining water without drawing any into your throat after clearing your regulator/snorkel What are 2 techniques for airway control?correct answerInhaling slowly, looking down, and touching your tongue to the roof of your mouth as you inhale

What are 8 symptoms of overexertion while diving?correct answerFatigue, labored breathing, a feeling of suffocation, weakness, anxiety, headaches, muscle cramping, and a tendency to panic What should I do if I think I'm becoming overexerted at the surface and underwater?correct answerStop all activity, signal your buddy, and rest What points should a dive plan normally include?correct answerAgree on best entry/exit techniques, decide what course you'll follow, agree on maximum time and depth, review underwater signs, determine when you will head back, agree on how you'll stay together during the dive, establish what you'll do if you become separated, discuss emergency procedures How do we conduct the predive safety check?correct answerUsing Begin With Review And Friend (BWRAF) BWRAFcorrect answerBCD, weight, releases, air, final check What do I do if I get separated from my buddy on a dive?correct answerLook for each other for no more than 1 minute, and then ascend to the surface if you can't find them How do my buddy and I manage our air supply together while diving?correct answerPlan your dive around who breathes air the fastest. Subtract your reserve/ascent supply from your starting pressure to find out how much pressure you have for the main part of the dive To be safe, plan to use half your air coming down, and half coming back What are the 5 steps for a proper descent with scuba?correct answer1. Confirm that your buddy is ready

2. Orient yourself to something
3. Switch from your snorkel to your regulator
4. Check your dive computer/timer
5. Signal "descend" and slowly deflate your BCD

What are the 5 steps for a proper ascent with scuba?correct answer1. Signal "up" and confirm that your buddy is ready

2. Check your dive computer/timer to be sure you're within dive limits
3. Look up and hold your BCD deflator hose
4. Ascend no slower than your dive computer's maximum rate
5. Look up, turn as you ascend, and stay with your buddy What is the maximum ascent rate?correct answer18 m/60 ft//min What is a safety stop?correct answerA pause in your ascent between 6 m/20 ft and 3 m/10 ft to give your tissues extra time to release dissolved gases for at least 3 minutes When would I not make a safety stop?correct answerWhen you're assisting a diver who has an air supply problem or if you're low on air dive computercorrect answerTells you your time and depth underwater and guides you in keeping dissolved nitrogen in your body within accepted limits How do I measure/define visibility as a diver?correct answerThe distance you can see horizontally underwater What 4 principles affect visibility?correct answerWater movement, weather, plankton, bottom composition When diving in a mild current, in what direction would I normally go?correct answerSwim slowly into the current so that when you turn the dive, the current will push you back to your exit point What do I do if I'm caught in a current and am carried downstream from where I planned to dive or exit the water?correct answerSwim perpendicular to the current What two things in the water affect a diver?correct answerThe waves and current

What is assessing conditions based on?correct answerThe weather, season, water motion, water appearance, reports online and from other divers, and dives made at similar sites What should I do if I see a potentially aggressive animal underwater?correct answerRemain still and calm. Swim away if you become uncomfortable In what depth water do waves break?correct answerIn the surf zone, in water only slightly deeper than their height surgecorrect answerA back-and-forth motion caused by waves passing overhead undertowcorrect answerThe water of waves flowing back to sea under incoming waves rip currentcorrect answerWhen waves push water over a long obstruction and the water underneath funnels back to sea through an available opening What should I do if I get caught in a rip current?correct answerEstablish buoyancy and swim at a sustainable pace parallel to the shore upwellingcorrect answerUsually caused by wind blowing from shore, pushing surface water away, resulting in cooler, deeper water rising towards the surface to replace it What 3 environmental conditions does tide generally affect?correct answerThe current, depth, and visibility bowcorrect answerThe front of the boat sterncorrect answerThe back of the boat portcorrect answerThe left side of the boat as you face forward

starboardcorrect answerThe right side of the boat as you face forward leewardcorrect answerThe side away from the wind windwardcorrect answerThe side toward the wind The bridge/wheelhousecorrect answerThe portion of the boat where the controls are headcorrect answerThe boat's toilet facilities galleycorrect answerThe boat's kitchen area swim stepcorrect answerA platform on the stern that is close to water level What are characteristics of a responsive diver?correct answerThey are breathing, alert, and active What are the 4 basic steps for assisting a responsive diver at the surface?correct answer1. Help reestablish breathing control

2. Have the diver take slow, deep, breaths
3. Give the diver a chance to rest and recover
4. Assist the diver to the boat or shore What are the 4 basic steps for assisting an unresponsive diver at the surface?correct answer1. Establish buoyancy for the victim and yourself
5. Call for help
6. Check for breathing and begin rescue breaths as you tow the diver
7. Continue rescue breathing and get the victim out of water

How should I breathe from a freeflowing regulator?correct answerDON'T seal your mouth on the mouthpiece. Hold the second stage and press the mouthpiece outside your lips, or insert one end of the mouthpiece into your mouth and "sip" breaths. Begin ascent immediately In order of priority, what are my four options if I run out of air underwater?correct answer1. Take lighter breaths and don't attempt a safety stop as you ascend

2. Use an alternate air source from your buddy
3. Make a controlled emergency swimming ascent (CESA)
4. Make a buoyant emergency ascent How do I make a controlled emergency swimming ascent (CESA)?correct answerWhen you have no air and are approximately 6-9 m/20-30 ft from the surface, look up and swim to the surface making a continuous ahhhhh sound into your regulator How do I make a buoyant emergency ascent?correct answerWhen you have no air and are very deep, ditch your weights, look up and swim to the surface making a continuous ahhhhh sound into your regulator How should I assist an unresponsive diver underwater and what is the priority?correct answerYou want to get the diver to the surface. Hold the diver's regulator in their mouth and try to ascend at a safe rate At a minimum, how many surface signaling devices should I have with me on a dive?correct answerAt least 2 - one audible and one visual How close am I supposed to stay to a dive flag?correct answerWithin 15 m/50 ft How far away are boaters supposed to stay from a dive flag?correct answerAt least 30-60 m/100-200 ft For what 4 purposes might I carry a slate or wet book?correct answerCommunication, to note dive plan limits, to record information during the dive, and for the unexpected What information do I typically record, at a minimum, regardless of what I choose?correct answerDate, dive site name/location, dive buddy, dive depth and duration, objective and description

What can I do with dive planning software?correct answerEstimate how long your air supply will last and estimate the time your dive computer will allow on a dive What is the composition of air to divers?correct answer79% nitrogen and 21% oxygen To what 4 diving related issues does the makeup of air relate?correct answerOxygen toxicity, contaminated air, decompression sickness, and gas narcosis How do I prevent oxygen toxicity?correct answerThe higher the oxygen content, the shallower the depth limit for using it while diving. Don't exceed 40 m/130 ft when diving recreationally What are 5 possible signs/symptoms of contaminated air?correct answerHeadache, nausea, cherry-red lips and fingernail beds, dizziness, and unconsciousness/unresponsiveness What are the 2 primary factors that influence how much nitrogen dissolves into my body tissues during a dive?correct answerDepth and time What is decompression sickness (DCS), or "the bends"?correct answerWhen excess nitrogen in your body tissues is too high when you surface, so nitrogen comes out of solution faster than your body can eliminate it. Nitrogen bubbles will form within your blood and body tissues. What are 9 signs/symptoms of decompression sickness?correct answerParalysis, dizziness, tingling, joint and limb pain, shock, numbness, difficulty breathing, weakness and prolonged fatigue, unconsciousness and death When do symptoms of DCS occur?correct answerUsually 15 minutes to 12 hours after a dive How does a dive computer or dive table estimate the amount of nitrogen I absorb during a dive?correct answerBy using your dive time and depth information to calculate the theoretical amount of nitrogen in your body

What is no stop diving?correct answerWhen you can swim directly to the surface without unacceptable risk of decompression sickness What is a no stop limit?correct answerThe maximum time you can spend at a given depth and still ascend to the surface What do I have to do if I exceed a no stop limit?correct answerI must make an emergency decompression stop What is an emergency decompression stop?correct answerStops at specific depths for prescribed times to allow your body to release dissolved nitrogen before you ascend further What is the relationship between depth and my no stop limits?correct answerThe deeper you dive, the shorter your no stop limits What is the difference between a decompression stop and a safety stop?correct answerSafety stops keep you well within limits, whereas emergency decompression stops return you from outside limits Why is residual nitrogen important?correct answerIt shortens your no stop limits if you make another dive What is a repetitive dive?correct answerA dive made while you still have residual nitrogen How do dive tables work?correct answerTable 1 assigns a Pressure Group letter that represents the theoretical amount of residual nitrogen based on your dive time and depth. Table 2 gives you credit for nitrogen leaving your body during a surface interval. Table 3 provides reduced no stop times for a repetitive dive What is a surface interval?correct answerThe time you spend at the surface between dives. During this, the residual nitrogen declines as it dissolves How do I be a SAFE diver?correct answerYou slowly ascend from every dive

What is finding a minimum surface interval?correct answerDetermining how long to wait after the first dive to have the no stop time you want at the planned depth of the repetitive dive What relationship is shown through dive computers?correct answerDepth and no stop time What are 3 ways I can find a minimum surface interval with a dive computer without using dive tables? correct answerWait and check your no stop time until it matches your planned repetitive dive depth, use the dive computer's plan mode, or use a tablet or smart phone app Why is going to a higher altitude after diving a potential issue?correct answerIt lowers the pressure around you at the surface, so dissolved nitrogen in body tissues comes out of solution faster than at sea level, therefore increasing your risk of DCS How do you fly or ascend to altitude after diving?correct answerYou start and end your dive at sea level, and then go to lower surface pressure at altitude How do you altitude dive?correct answerYou start and end your dive at lower surface pressure at altitude What are the current recommendations for flying after a single dive?correct answerA minimum surface interval of 12 hours What are the current recommendations for flying after repetitive dives or multiday dives?correct answerA minimum surface interval of 18 hours What are the current recommendations for flying after dives requiring emergency decompression stops? correct answerA minimum surface interval greater than 18 hours Why are being cold and/or exerting myself strenuously issues with respect to decompression sickness risk?correct answerYou may end up with more dissolved nitrogen than calculated by your dive computer What should I do if I am cold or exert myself strenuously on a dive?correct answerPlan dives as though they are 4 m/10 ft deeper than their actual depth

What is the first aid for a diver with suspected DCI?correct answer1. Stop all diving

2. Check for breathing and provide CPR as needed
3. Contact emergency medical care
4. Keep the diver lying down and provide emergency oxygen
5. Monitor the diver and take steps to prevent shock
6. Lay the diver level, left side down, head supported, breathing oxygen What treatment is usually required for DCI?correct answerBeing put in a recompression chamber, where the pressure put on the diver helps the body absorb the gas bubbles present What is gas narcosis?correct answerAn intoxicating effect when many gases are put under pressure What are signs/symptoms of gas narcosis?correct answerFeeling drunk/high, loss of coordination, slowed thinking, slowed reactions, inappropriate laughter, depression, false sense of security, ignoring or disregard for safety, anxiety or panic when you're under stress at depth How do I avoid gas narcosis and what do I do if it occurs?correct answerDon't dive too deep and immediately ascend to a shallower depth What is a lubber line on a compass?correct answerA straight line through the center of the compass face or along the side from the 6 o'clock to the 12 o'clock positions that is your direction of travel How should I hold a compass when navigating with it underwater?correct answerRelatively level, aligning the lubber line with the center line of your body, locking your arms, and looking over the compass, not down on it How should I set a compass to navigate a straight line from one point to another?correct answer1. Hold the compass so the lubber line is pointed in desired travel direction
7. Let the north needle settle on magnetic north, then rotate bezel until index marks straddle the needle
8. Swim along the lubber line keeping the needle within the index marks