Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

TCFP Inspector's Class II Exam With 100% Correct And Verified Answers, Exams of Advanced Education

Which of the following are a type of sprinkler? A) ESFR B) EC C) AF D) A and B - Correct Answer-A and B Foam water system design and installation requirements are regulated by ___________. A. NFPA 13 B. NFPA 13R C. NFPA 25 D. NFPA 16 - Correct Answer-NFPA 16 True or False, NFPA 72 allows only manual pull stations and water flow detection devices to be used on shunt systems. Fire detection devices are not permitted. - Correct Answer-True The fire alarm control panel (FACP) is essentially the _____ of the system. - Correct Answer-Brain Heat sensing fire detector color coding has a RED extra high temperature rating of? A.) 0-99f B.)175-249f C.) 325-399f D.) 500-575f - Correct Answer-325-399f

Typology: Exams

2023/2024

Available from 07/12/2024

Qualityexam
Qualityexam 🇰🇪

2.5

(4)

2.9K documents

Partial preview of the text

Download TCFP Inspector's Class II Exam With 100% Correct And Verified Answers and more Exams Advanced Education in PDF only on Docsity!

TCFP Inspector's Class II Exam With

100% Correct And Verified Answers

Which of the following are a type of sprinkler? A) ESFR B) EC C) AF D) A and B - Correct Answer-A and B Foam water system design and installation requirements are regulated by ___________. A. NFPA 13 B. NFPA 13R C. NFPA 25 D. NFPA 16 - Correct Answer-NFPA 16 True or False, NFPA 72 allows only manual pull stations and water flow detection devices to be used on shunt systems. Fire detection devices are not permitted. - Correct Answer-True The fire alarm control panel (FACP) is essentially the _____ of the system. - Correct Answer-Brain Heat sensing fire detector color coding has a RED extra high temperature rating of? A.) 0-99f B.)175-249f C.) 325-399f D.) 500-575f - Correct Answer-325-399f According to NFPA, travel distances to a manual pull station should not exceed _____ feet. A. 100 B. 200 C. 300 D. 400 - Correct Answer- What color tag is used to indicate that an alarm system is impaired? A. White B. Yellow C. Blue D. Red - Correct Answer-Red About _____ % of fire deaths are attributed to smoke inhalation and not to burns. A. 55%

B. 60%

C. 65%

D. 70% - Correct Answer-65% When performing maintenance inspections of occupancies with alarm systems, the first step will be to: A) Check for green light indicating normal operation B) Confirm monitoring status with alarm company C) Confirm panel is locked and inaccessible to public D) Confirm system has been tested by licensed alarm contractor and has a current inspection tag - Correct Answer-Confirm system has been tested by licensed alarm contractor and has a current inspection tag Most people are well aware of the dangers of fire but less aware of the dangers of smoke inhalation. About ___% of of fire deaths are attributed to smoke inhalation and not to burns. A) 65 B) 80 C) 92 D) 75 - Correct Answer- If required, pull stations should be placed within ___ feet of every exit. a) 4 b) 5 c) 10 d) does not matter what distance, as long as it is not blocked - Correct Answer- T or F: The development of clean-agent fire-extinguishing systems began in the late 1940s. - Correct Answer-True NFPA 10 has assigned a maximum travel distance of __ feet from the hazard to a Class K extinguisher? A) 30 B) 50 C) 75 D) 100 - Correct Answer- If an extinguisher is suitable for use on a particular class of fire, the picture-symbol background is what color? A.) Red B.) Light Blue C.) Black D.) Grey - Correct Answer-Light Blue Which one of the following is not considered a proper placement of a fire extinguisher? A. Visible and marked with legible signage.

B. Near Points of egress or ingress. C. Sitting on top of a work bench with no mount. D. Near formal paths of travel. - Correct Answer-Sitting on top of a work bench with no mount. Foam extinguishes a fire by one or more of the four following methods except: A. Smothering B. Seperating C. Suppressing D. Blanketing - Correct Answer-Blanketing In regards to carbon dioxide fire-extinguishing systems, total flooding systems are designed to deliver at least ___ percent concentration of CO into and enclosed area. A. 21 B. 19 C. 34 D. 15 - Correct Answer- What is the fuel classification for combustible metals? A. Class A B. Class B C. Class C D. Class D - Correct Answer-Class D Most fire-extinguishing foam concentrates in use today are of the _____ type, which means they must be proportioned with water and mixed with air (aerated) before they can be used. A. mechanical B. electrical C. slippery D. bubbly - Correct Answer-mechanical A properly placed fire extinguisher will result in all of the following except: A. Visible, signage not necessary B. Not be blocked by storage or equipment C. Near points of egress and ingress D. Near normal paths of travel - Correct Answer-Visible, signage not necessary A dry chemical extinguishing system is used wherever rapid fire extinguishment is required and where ________ of the burning material is unlikely. A) exploding B) oxidation C) smothering D) reignition - Correct Answer-reignition NFPA 10 establishes a Class B flammable liquid fire with depth at____

A. 1/2"

B. 1/4"

C. < 1/4"

D. > 1/2" - Correct Answer-1/4" What percentage of fire deaths is attributed to smoke inhalation? A) 65% B) 50% C) 42% D) 15% - Correct Answer-65% True/False A critical feature and limitation of special-agent fire-extinguishing systems is the quality of agent available in the system. - Correct Answer-False - "quantity" High expansion foam fire extinguishing systems typically have the following expansion rates: A) 7:1 to 20: B) 20:1 to 200: C) 200:1 to 1,000: D) 1,000:1 to 2,500:1 - Correct Answer-200:1 to 1,000: The most serious problem involving CO2 systems, especially total flooding systems, is __________? A. pre-activation B. personnel safety C. exploding actuating mechanisms D. lack of nozzle lubrication - Correct Answer-personnel safety Which is not considered a foam expansion rate? A. Low B. Medium C. High D. Fast - Correct Answer-Fast In addition to foam concentrate and mechanical agitation, what other two elements are necessary to produce high-quality fire fighting foam: a) borosilicate ketone and muriatic acid b) water and air c) 3% hydrocarbon and a polar solvent d) sodium bicarbonate and potassium chloride - Correct Answer-water and air Foam Fire-extinguishing systems extinguish the fire by one or more of the following ways Except_____. A. Smothering B. Separating

C. Compressing D. Cooling - Correct Answer-Compressing Class K extinguishing agents turn fats and oils into a soapy form that extinguishes the fire through a process known as __________. A. ozonification B. ionization C. saponification D. lubrication - Correct Answer-saponification NFPA ______ is the Standard on Carbon Dioxide Extinguishing Systems. a. NFPA 10 b. NFPA 14 c. NFPA 12 d. NFPA 2001 - Correct Answer-NFPA 12 Sprinklers can be omitted from the following areas in one and two family dwellings except: A. Garages B. Entrance hallways C. Porches D. Bedrooms not over 55 square feet - Correct Answer-Bedrooms not over 55 square feet Considered by many to be the first line of defense against fires, automatic sprinkler systems, in their basic forms, have been in use for over _____ years. A. 60 B. 70 C. 85 D. 100 - Correct Answer- According to the IFSTA Manual for Fire Inspector & Code Enforcement (7th Edition), the hydrant clearance between the bottom of the butt (discharge outlet) and the grade should be at least? a. 10 inches b. 12 inches c. 15 inches d. 18 inches - Correct Answer-15 inches Most fires in sprinkler equipped structures are controlled by the operation of _________. a) 5-8 sprinklers b) 5 or fewer sprinklers c) fewer than 10 sprinklers d) 10-15 sprinklers - Correct Answer-5 or fewer sprinklers

Where pressure at the hose outlet exceeds 100psi, NFPA 14 requires a pressure- regulating device to limit the pressure to _____ PSI , unless otherwise approved by the fire dept. A. 50 B. 75 C. 100 D. 125 - Correct Answer- A _____ consists of a network of pipes, storage tanks, control valves, and hydrants. A. water facility B. fire protection system C. distribution system D. water park - Correct Answer-distribution system The purpose of ____________ is to block the vertical spread of fire through a building and in stairwells to protect the means of egress. A. Fire Walls B. Enclosure Walls C. Curtain Walls D. Fire Partitions - Correct Answer-Enclosure Walls Large pipes with relatively wide spacing which carry large quantities of water to various points in a distribution system are called A. primary feeders B. secondary feeders c. distributors D. dead end mains - Correct Answer-primary feeders Application, review, issuance and expiration are the elements in the process for obtaining a/n : A. code B. standard C. permit D. inspector - Correct Answer-permit The effectiveness of evacuation plans should be tested on a regular basis by conducting __________________________. A. Skills testing. B. Emergency evacuation drills. C. Fire response drills. D. Written tests. - Correct Answer-Emergency evacuation drills? The duties assigned to an inspector will vary based on the type and size of the inspections organization. True or False - Correct Answer-True

As with any vertical opening in a building, pipe chases can spread ______________ to other floors of the building if not properly protected. A. Smoke and fire. B. Sound and vibrations C. Trash and odors. D. Rats, roaches and other vermin. - Correct Answer-Smoke and fire. T or F: Wired glass is not effective as a fire barrier, it is strictly for security. - Correct Answer-F The ability of occupants to evacuate a structure rapidly and safely in the event of a fire or other emergency is a __________ aspect of building design. A. non-issue B. primary C. secondary D. tertiary - Correct Answer-primary The means of egress must terminate in a public way or an area of refuge. A public way must have a minimum width and height of? a. 15 feet b. 5 feet c. 12 feet d. 10 feet - Correct Answer-10 feet The ____ is one of the most important factors to be considered in determining whether the design and construction of a structure can be considered safe. A. means of egress system B. fire department connection C. building construction type D. Alarm system - Correct Answer-means of egress system The _____ is based on the type of occupancy, type of building construction, and whether the building has an automatic sprinkler system or not. A. fire-resistance-rating B. fire load C. flammability rating D. fire code - Correct Answer-fire-resistance-rating A means of egress through a fire barrier or firewall to an area of refuge in the same building is a/n A. exit discharge B. exit C. horizontal exit D. protect in place - Correct Answer-horizontal exit Which of the following is NOT a type of dead-end access road.

T or hammerhead cul-de-sac alley dock three point turn around - Correct Answer-three point turn around Cooking equipment must have a clearance of at least __ inches from any combustible material unless it is specifically designed for a lesser clearance. A) 12 B) 18 C) 36 D) Dependant on AHJ - Correct Answer- Following a welding of thermal cutting operation, a fire watch must be maintained for at least ______ after any job is completed. A. 60 minutes B. 30 minutes C. 20 minutes D. 15 minutes - Correct Answer-30 minutes Dead end fire department access roads longer than 150 ft. must be provided with a: A. Turnaround B. Grass pave fire lane C. Knox key switch D. 13% road grade - Correct Answer-Turnaround The presence of a nonflowing electrical charge that may develop on almost any surface. a) Alternating current b) static electricity c) arcing electricity d) direct current - Correct Answer-static electricity Following a welding or thermal cutting operation (also called hot work), a fire watch must be maintained for at least _____ minutes after any job is completed. A. 60 B. 15 C. 30 D. 120 - Correct Answer- Three primary storage methods? a. pallet storage b. rack storage c. solid piling d. all of the above - Correct Answer-all of the above Inspectors should check all material-handling equipment within recycling facilities. These include all of the following except:

A) Waste chutes and handling systems B) Shredders C) Extruders D) Incinerators - Correct Answer-Incinerators When certain high-hazard commodities such as vehicle tires, plastics, flammable liquids, unused pallets, and the like are stored over ___ ft in and height and combustible materials are stored over __ft, the storage is considered_____. A.8, 12, high hazard storage B.12, 20, high piled storage C. 12, 20 high hazard solid stack storage D. 6, 12, high piled storage - Correct Answer-6, 12, high piled storage T or F: Dust explosions occur in series. The first explosion usually is not as severe as subsequent explosions. - Correct Answer-True A _______ is a brief spike in voltage, usually lasting millionths of a second, and one form of electrical power disturbance that can create a fire hazard. a) spark b) arc c) power surge (also known as voltage and transient surge) d) ground fault - Correct Answer-power surge (also known as voltage and transient surge) For Recreational Fires, the fire itself should be no more than _____ feet from a structure unless it's contained in a BBQ pit.

  1. 15 feet
  2. 20 feet
  3. 25 feet
  4. 12 feet - Correct Answer-25 feet How does a power surge enter a building? A) Electrical Service Lines B) Telephone Lines C) Cable Television Lines D) Satellite Dishes E) All the Above. - Correct Answer-All the above __________ is the movement of a current between two electrodes or conductors and may result also result in a fire. A. Voltage B. Amperage C. Arcing D. Static electricity - Correct Answer-Arcing Which of the following is a type of fire lane turnaround? A) Oval Face

B) Ladder Dock C) Hammerhead D) Cobra - Correct Answer-Hammerhead Code requirements for regulating "open burning" include the following: Uncontained fires should not be allowed within feet of a structure? A. 15 B. 10 C. 25 D. 50 - Correct Answer- According to the IFC Chapter 3 power point presentation , hot ashes and combustible ignition sources are not supposed to be placed within ___ft of combustibles (including walls), or within ____ft of building openings. A) 10, 2 B) 100, 20 C) 1000, 200 D) 1, 2000 - Correct Answer-10, 2 __________ feet is the minimum unobstructed height above fire lanes or fire apparatus access roads. A. 12 B. 13 C. 13. D. 20 - Correct Answer-13. The cause of most failures in Industrial furnaces and ovens can be traced to: A) Inadequate training of operators B) Lack of proper maintenance C) Improper application of equipment D) all the the above - Correct Answer-all the the above Foam extinguishes a fire by one or more of the following methods: A. Smothering B. Separating C. Cooling D. Suppressing E. All of the above - Correct Answer-All of the above Fire-extinguishing agents used in fixed dry-chemical systems are generally the same types that are used in portable fire extinguishers. a. True b. False - Correct Answer-True

Wet chemical fire-extinguishing agents are typically composed of water and either one of three agents. Which of the following is not one of the three listed in the book? A Potassium carbonate B Potassium bicarbonate C potassium acetate D potassium ctrate - Correct Answer-Potassium bicarbonate The proper mounting height of a multipurpose dry chemical fire extinguisher, weighing less than 40 pounds, is between _______ inches and _______ inches. A. 2 and 48 B. 4 and 44 C. 2 and 60 D. 4 and 60 - Correct Answer-4 and 60 There are 5 kinds of special-agent fire-extinguishing systems. Which one listed below is INCORRECT. A. Dry Chemical B. Wet Chemical C. Dirty Agent D. Carbon Dioxide - Correct Answer-Dirty Agent When conducting an acceptance test for a paint booth the first nozzle in the exhaust duct must be located just inside the duct entrance. The remaining nozzles must be spaced how far apart? A. Within 5 feet of each other B. Within 10 feet of each other C. Within 12 feet of each other D. Within 15 feet of each other - Correct Answer-Within 12 feet of each other Regarding fire extinguisher ratings, extinguishers undergo 3 tests to determine their Class A rating. Which of the following tests DOES NOT occur?

  1. Wood Panel
  2. Wood Trim
  3. Wood Crib
  4. Excelsior - Correct Answer-Wood Trim NFPA 72 also requires that pull stations be placed within __________ of every exit so that facility occupants can activate an alarm while they are exiting the facility. a. At the door b. 5 feet c. 10 feet d. 15 feet - Correct Answer- The secondary power supply must be able to make the fire detector and alarm system fully operational within _____ seconds of main power supply failure. A. 10 sec

B. 20 sec C. 30 sec D. 60 sec - Correct Answer-30 sec A secondary power supply must be provided for a fire detection and alarm system, so that the system will be operational even if the main power supply fails. The secondary system must be able to make the fire detection and alarm system fully operational within ____ seconds of the main power supply's failure. A. 10 B. 20 C. 30 D. 45 - Correct Answer- Manual pull stations can be single-action or ______ -action? A. married B. double C. multiple D. single - Correct Answer-double A secondary power supply must be provided for a fire detection and alarm system. The secondary system must be able to make the fire detection & alarm system fully operational within __ seconds of the main power supply's failure. A. 15 B. 20 C. 30 D. 60 - Correct Answer- Which of the following is true concerning an ionization smoke detector: A) Ionization smoke detectors will not work for flaming fires B) Ionization smoke detectors respond to flaming fires but slower than photoelectric detectors C) Ionization smoke detectors are best suited for rooms that contain highly combustible materials D) None of the above are true concerning ionization smoke detectors - Correct Answer- Ionization smoke detectors are best suited for rooms that contain highly combustible materials About _____ percent of fire deaths are attributed to smoke inhalation and not to burns. A. 65 B. C. D.95 - Correct Answer- _______ smoke detectors respond the quickest to smoldering fires.

A. Ionization B. Projected beam C. Air sampling D. Photoelectric - Correct Answer-Photoelectric Nonrestorable fixed-temperature detectors are not required to be tested until ___ years after initial installation. At that time ___% of the detectors must be removed and laboratory tested. A. 10, 3 B. 20, 5 C. 15, 2 D. 5, 4 - Correct Answer-15, 2 Which item is NOT required for a detector test A. Test date B. Model number C. Location D. Detector type - Correct Answer-Model number Typically, rate of rise heat detectors are designed to send a signal when the rise in temperature exceeds _______ A. 3 to 7 F B. 12 to 15 F C. 10 to 15 F D 7 to 12 F - Correct Answer-12 to 15 F A smoke detector has stopped working. What type signal will the alarm panel display? A. Alarm B. Supervisory C. Trouble D. Skynet has become self aware and is taking over - Correct Answer-Trouble According to NFPA 72, which of the following is NOT true regarding manual pull stations? A) Travel distance between pull stations must not exceed 200 feet. B) Pull stations must be located within 5 feet of every exit. C) Only single-action pull stations that require a single motion to activate are allowable. D) Pull stations should be mounted between 3 1/2 and 4 1/2 feet above the floor. - Correct Answer-Only single-action pull stations that require a single motion to activate are allowable. Which is NOT one of the two types of manual pull stations? a) lever-action b) single-action c) double-action d) none of the above - Correct Answer-none of the above

How many sources of power are required for fire alarm control panels? A) 1 B) 2 C) 3 D) 4 - Correct Answer- Hazardous materials that are manufactured, stored, processed, or used at a particular site are subject to regulations of the _______________. a. state building and fire codes b. federal building and fire codes c. department of transportation d. local building and fire codes - Correct Answer-local building and fire codes The NFPA 704 system uses a rating system of numbers from ______ to ______. A. 1, B. 1, C. 0, D. 0,5 - Correct Answer-0, True or False: A pressure-relief device should be installed on every length of pipe between two shutoff valves for pipes carrying cryogenic liquids. - Correct Answer-True Loading and unloading stations for Classes IA through IC liquids must be located no closer than ____ from storage tanks, property lines, or adjacent buildings. A) 1/6 the diameter of the tank B) 12 Feet C) 25 Feet D) 50 Feet - Correct Answer-25 Feet Storage areas must be graded so that spills have at least a ______ curb, and some provision for removing rain or spilled liquids that accumulate must be in place. A. 4 inch B. 6 inch C. 8 inch D. 10 inch - Correct Answer-6 inch According to the NFPA 704 Marking System, the four colors utilized in the categorizing of materials are: A) red, purple, khaki, and magenta B) blue, cream, olive, and lavender C) blue, red, yellow, and white D) yellow, beige, silver and pewter - Correct Answer-blue, red, yellow, and white According to page 680 in the text, the Plan Review Process goes in the following order:

A) Apply, Submerge, Review, Change, Accept, Authorize B) Apply, Submit, Redo, Change, Accept, Authorize C) Apply, Submit, Review, Change, Accept, Authorize D) Appease, Submit, Review, Change, Accept, Authorize - Correct Answer-Apply, Submit, Review, Change, Accept, Authorize A site plan would include all of the following except: a. exterior building materials b. north direction c. areas to be landscaped d. utility lines - Correct Answer-exterior building materials Inspectors and plans examiners from the fire department play an important role in the plans review and field verification process. A. True B. False - Correct Answer-True Acids turn litmus paper to what color? - Correct Answer-red T or F: Vehicles that are transporting over 1,001 pounds of flammable solids are required by DOT to have placards? - Correct Answer-True A common marking system to identify the general hazard present is the: A. NFPA 704 diamond B. NFPA 704 circle C. NFPA 704 rectangle D. NFPA 704 triangle - Correct Answer-NFPA 704 diamond Which pressure relief device, on a cryogenic container, ruptures should the pressure relief valve malfunction, or the pressure rise within the container is excessive? A. Pressure-relief valve B. Frangible disk C. Frangible bulb D. Safety vent in the insulation space - Correct Answer-Frangible disk Which type of storage magazine provides the highest level of safety and security? A. Type 1 B. Type 2 C. Type 3 D. Type 4 - Correct Answer-Type 1 Which answer below is NOT true of oxidizers? a) They support combustion and increase the intensity of burning b) Capable of causing a fire through friction, absorption of moisture, spontaneous chemical reaction, or retained heat c) Initiate or promote combustion in other materials

d) When exposed to heat, can decompose, releasing oxygen that accelerates any fire that may be present - Correct Answer-Capable of causing a fire through friction, absorption of moisture, spontaneous chemical reaction, or retained heat Toxic or highly toxic materials may enter the body through which of the following ways? A. Inhalation B. Ingestion C. Absorption (contact) D. Injection E. All of the above - Correct Answer-All of the above The UN system servers as the basis for DOT regulations. The UN system enables an inspector to quickly recognize most hazardous materials or goods. Which of the following is NOT one of standard system? A. DOT label B. NFPA 407 system C. DOT marking D. DOT placard - Correct Answer-NFPA 407 system Which form of ionizing radiation has high energy photons that can easily pass through the human body or be absorbed by tissue and requires lead or concrete to shield against the rays? A. Alpha B. Beta C. Gamma D. X-ray - Correct Answer-Gamma The hazard rating system regarding hazardous material is identified as NFPA: a. 210 b. 1500 c. 704 d. 1004 - Correct Answer- Corrosives are those chemicals that cannot cause visible destructive or irreversible harm to skin tissue. A.) T B.) F - Correct Answer-F as it does cause irreversible damage In North America, UN numbers are usually found on the following container packages: A) Rail tank cars B) Cargo tank cars C) Portable tank cars D) All of the above - Correct Answer-All of the above

Inspectors who are assigned to inspection and permitting operations involving explosives must receive ________ from local, or federal authorities before participating in these operations. a) specialized training in these procedures b) a blue ribbon c) a major award d) a helmet with eye protection - Correct Answer-specialized training in these procedures Non-bulk packaging for storing flammable and combustible liquids come in several forms, including all of the following except: A. Safety cans B. Polystyrene containers C. Metal containers D. Polyethylene containers - Correct Answer-Polystyrene containers Ordinary combustibles are what fuel classification? A. Class A B. Class B C. Class C D. Class D - Correct Answer-Class A Hoses used for local application of clean agent fire extinguishing systems must be pressure tested: A. Annually B. Every 5 years C. Every 6 years D. Every 12 years - Correct Answer-Annually Pull stations are allowed to have protective covers to prevent false activations. The covers must be ____ or ____ in color, and have clear instructions. A. Clear B. Red C. Both A and B D. Orange - Correct Answer-Both A and B The heat-sensing fire detector color code of red designates the _____________ temperature classification. A.) Very Extra High B.) Ordinary C.) Intermediate D.) Extra High - Correct Answer-Extra High Which device is Not part of a fire alarm initiating devices in operation today: A. Automatic Pull station B. Heat Detector

C. Flame Detector D. Smoke Detector - Correct Answer-Automatic Pull station With regards to asphalt kettles, an attendant must be within how many feet when the heat source is on? A. 50 B. 100 C. 150 D. 200 - Correct Answer- When inspecting tire storage facilities, weeds and vegetation must be cleared within ___ ft. of any tire pile. A. 25 B. 40 C. 50 D. 75 - Correct Answer- Any Portable heater must be listed by an accredited testing agency such as? A.) UL Underwriters Laboratories Inc. B.) Canada Testing corp. C.) NFPA D.) NONE - Correct Answer-UL Underwriters Laboratories Inc. Following welding or thermal cutting operations, how long is a fire watch required after the job has been completed? A) No fire watch is required if there are no combustibles within a 35ft. radius of the job site. B) 15 minutes C) 30 minutes D) 1 hour - Correct Answer-30 minutes In recycling facilities, materials stored may not be stacked closer than ___ feet from the ceiling in the building without automatic sprinkler systems or at least ___ inches below sprinklers in buildings that have sprinkler systems. a. 2 & 20 b. 3 & 15 c. 2 & 10 d. 2 & 18 - Correct Answer-2 & 18 In order for a dust explosion to occur, four conditions must be met at the same time. Which is not one of the conditions? A) The dust must be in a confined space. B) The dust particles must be smaller than .5 microns in size. C) The dust must be within it's explosive range. D) An ignition source must be present.

E) Combustible dust must be suspended in the air. - Correct Answer-The dust particles must be smaller than .5 microns in size. NFPA ____ is the Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures. A. 101 B. 102 C. 2001 D. 1031 - Correct Answer- True or False-- The elevation view is a three- dimensional view of the building as seen from the exterior. - Correct Answer-False The pressure test of the fire main that provides water to the on-ground hydrants and fire protection system riser is the: A. Shell Permit B. Underground Hydrostatic Test C. Alarm Test D. Fire-Smoke Damper Test - Correct Answer-Underground Hydrostatic Test When a building is to be completed in phases, and the designation N.I.C. appears on plans or partial plans, it means what A. Noted in Contract, meaning the infrastructure of the unapproved plans are laid during the first phase of construction. B. Not in Contract, however the infrastructure of the project is always laid during the first phase of construction. C. Not in Contract, and has been approved, but is not part of the current project. D. Not In Contract, and has not been approved and is not part of the current project. - Correct Answer-Not In Contract, and has not been approved and is not part of the current project. The process of listing the construction materials is referred to as ____________ the materials. A. disclosing B. verifying C. calling up D. membering - Correct Answer-calling up Which of the following is the correct order of the Plans Review Process? A. Review, Apply, Submit, Change, Accept, Authorize B. Authorize, Apply, Accept, Submit, Change, Review C. Apply, Submit, Review, Change, Accept, Authorize D. Apply, Accept, Review, Change, Submit, Authorize - Correct Answer-Apply, Submit, Review, Change, Accept, Authorize Which of the following is considered a component of a fire alarm system:

a) signal initiation devices b) power supply c) signal notification devices d) fire pumps e) all of the above - Correct Answer-all of the above Fire detection and alarm systems are designed to the requirements found in NFPA ____ , National Fire Alarm Code. A. 72 B. 82 C. 13R D. 1001 - Correct Answer- Which of the following main views of plans and specifications are found on working drawings? A. Plan B. Elevation C. Sectional D. Detailed E. All the above - Correct Answer-All the above Mechanical, electrical, plumbing and sprinkler are all example of what type of plan? A. System Plans B. Detail Plans C. Floor Plans D. Sectional View - Correct Answer-System Plans Which of the plans is usually one of the first sheets of a set of construction drawings? A Plan views B Site plan or plot C Floor Plan D Your moms plan - Correct Answer-Site plan or plot