Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Community
Ask the community for help and clear up your study doubts
Discover the best universities in your country according to Docsity users
Free resources
Download our free guides on studying techniques, anxiety management strategies, and thesis advice from Docsity tutors
What does SHRP2 stand for? - ACCURATE ANSWERS✔✔ Strategic Highway Research Program 2 How many areas of focus does SHRP 2 have? what are they? - ACCURATE ANSWERS✔✔ 4 areas of focus: 1. Safety 2. Renewal 3. Reliability 4. Capacity National Unified The TIM training program was designed to? - ACCURATE ANSWERS✔✔ Establish the foundation for and to promote consistent training of all responders to achieve the three objectives of the TIM goal What are the three objectives of the TIM National Unified Goal (NUG)? - ACCURATE ANSWERS✔✔ 1. Responder Safety 2. Safe, Quick Clearance 3. Prompt, Reliable, Interoperable Communications What are D Drivers? - ACCURATE ANSWERS✔✔ Drunk Drugged Drowsy Distracted Dumb Who suffers the most deaths by being struck each year? - ACCURATE ANSWERS✔✔ Tow truck drivers (Average 60)
Typology: Exams
1 / 18
TIMS EXAM 2024
TIMS EXAM 2024\2025 WITH GUARANTEED ACCURATE ANSWERS |VERIFIED What does SHRP2 stand for? - ACCURATE ANSWERS✔✔ Strategic Highway Research Program 2 How many areas of focus does SHRP 2 have? what are they? - ACCURATE ANSWERS✔✔ 4 areas of focus: 1. Safety 2. Renewal 3. Reliability 4. Capacity National Unified The TIM training program was designed to? - ACCURATE ANSWERS✔✔ Establish the foundation for and to promote consistent training of all responders to achieve the three objectives of the TIM goal What are the three objectives of the TIM National Unified Goal (NUG)?
What are D Drivers? - ACCURATE ANSWERS✔✔ Drunk Drugged Drowsy Distracted Dumb Who suffers the most deaths by being struck each year? - ACCURATE ANSWERS✔✔ Tow truck drivers (Average 60) On average, how many police officers die by being struck by traffic each year? - ACCURATE ANSWERS✔✔ Average of 12 per year over 24 years Crashes that occur within the incident scene or within the queue or backup, including the opposite direction, resulting from an original incident. - ACCURATE ANSWERS✔✔ Secondary crashes Effective TIM reduces and does what? - ACCURATE ANSWERS✔✔ Reduces the duration and impacts of traffic incidents -Improves the safety of motorists, crash victims, and emergency responders. Goods that have been imported or exported illegally into the dormitory, and are not allowed? (i.e. testosterone supplements) - ACCURATE ANSWERS✔✔ Contraband Goal of TIM is to? - ACCURATE ANSWERS✔✔ Shorten the time duration between when the incident occurs, and when traffic resumes as normal.
Three standards that TIM performance measures? - ACCURATE ANSWERS✔✔ 1. Roadway clearance time 2. Incident clearance time 3. Number of secondary crashes The practice of rapidly, safely, and aggressively removing temporary obstructions from the roadway? - ACCURATE ANSWERS✔✔ Safe, quick clearance What does safe, quick clearance help to do? - ACCURATE ANSWERS✔✔ 1. Minimizing exposure to adjacent passing traffic 2. Reduce the probability of secondary crashes 3. Relieve overall congestion and delay. Nationally, there are three types of laws that facilitate TIM, what are they? - ACCURATE ANSWERS✔✔ 1. Move Over Laws 2. Driver Removal Laws 3. Authority Removal Laws Law that provides authority (and immunity from liability in general) for designated public agencies to remove vehicles and/or spilled cargo from the roadway to restore traffic flow. - ACCURATE ANSWERS✔✔ Authority Removal Laws Law that require motorists involved in minor crashes (where there are no serious injuries and the vehicle can be driven) to move their vehicles out of the travel lanes to the shoulder or other safe area? - ACCURATE ANSWERS✔✔ Driver Removal Laws
Law that requires drivers approaching a scene where emergency responders are present to either change lanes when possible and/or reduce vehicle speed? - ACCURATE ANSWERS✔✔ Move Over Laws National standard that was first published in 1935, and it has been maintained by FHWA since 1971? - ACCURATE ANSWERS✔✔ MUTCD - Manual on Uniform Traffic Control Devices Purpose of MUTCD - ACCURATE ANSWERS✔✔ Promotes the uniformity of traffic control signs, signals, and markings from state to state. Lane Designation Terminology? - ACCURATE ANSWERS✔✔ Plain English When describing highway lanes... - ACCURATE ANSWERS✔✔ left is analogous with inside and right with outside, from the perspective of the flow of traffic. A numbering system that assigns numbers 1, 2, 3, etc. from the left to right lane, again from the perspective of the flow of traffic, can be used.
True or False: TIM terminology is not just applicable to urban roads and freeways, the techniques apply to local streets and rural roadways too. - ACCURATE ANSWERS✔✔ True Traffic that is entering or approaching the incident scene is considered? - ACCURATE ANSWERS✔✔ Upstream traffic Traffic that is departing or past the incident is considered? - ACCURATE ANSWERS✔✔ Down stream traffic Departing traffic is? - ACCURATE ANSWERS✔✔ Downstream Approaching traffic is? - ACCURATE ANSWERS✔✔ Upstream The backup of traffic that results from an incident or blocked lanes? - ACCURATE ANSWERS✔✔ A traffic queue True or False: A queue may form in either direction of travel because of rubberneckers. - ACCURATE ANSWERS✔✔ True Who is typically the first to receive notification of an incident? - ACCURATE ANSWERS✔✔ Dispatcher Dispatchers are responsible for? - ACCURATE ANSWERS✔✔ - Providing a basic assessment of the situation -Dispatching an appropriate response based on their knowledge of available resources
Steps to the notification and verification process? - ACCURATE ANSWERS✔✔ 1. Detection 2. Verification 3. Notification The discovery of an incident and the first step in the TIM process. - ACCURATE ANSWERS✔✔ Detection Involves collecting as much information as possible from the individual(s) reporting the incident including the exact location, the make, model, and color of the involved vehicles, and a call back number in case more information is needed - ACCURATE ANSWERS✔✔ Verification When the communications center will dispatch the appropriate response? - ACCURATE ANSWERS✔✔ Notification Whats a TMC? - ACCURATE ANSWERS✔✔ Transportation Management Center Whats a TOC? - ACCURATE ANSWERS✔✔ Traffic Operations Centers Serves as the hub for the collection and dissemination of incident information? - ACCURATE ANSWERS✔✔ Traffic Operations Centers
Monitoring traffic conditions using? - ACCURATE ANSWERS✔✔ - (CCTV) cameras -Roadway detectors and congestion maps -Public safety contacts via phone and/or computer-aided dispatch (CAD) links TMCs are usually responsible for? (5) - ACCURATE ANSWERS✔✔ - Monitoring traffic conditions -Providing real-time traveler information - Providing traffic and incident info notification to other traffic management/communication centers, public safety partners and the news media -Monitoring traffic management devices to ensure they are functioning properly -Controlling traffic management devices, including ramp meters, traffic signal systems, etc. Providing real-time traveler information using? - ACCURATE ANSWERS✔✔ -511 - phone systems, websites and social media - Dynamic message signs (DMS) -Portable changeable message signs (PCMS) -Highway advisory radio (HAR) Initial arrival/windshield size-up report should include? - ACCURATE ANSWERS✔✔ -Unit identification -Exact location of incident -Number and type of vehicles involved -Degree of damage -Number of lanes closed -Hazards or problems -Establishment of command Detailed and accurate size-up should be provided after the responder has? - ACCURATE ANSWERS✔✔ More fully assessed the scene. How should reporting go? (timeline) - ACCURATE ANSWERS✔✔ 1. Initial/ Windshield Size-Up Report 2. 15-Minute Detailed Size-Up Report 3. Regular Progress Reports
The following information should be provided during the detailed size- up report and/or during subsequent progress reports? - ACCURATE ANSWERS✔✔ -Location -Vehicles - number/type -Injured Persons - Incident Duration Classification (Minor, Intermediate, or Major) -On- Scene Conditions -Hazardous Materials -Traffic Conditions -Towing and Recovery -Additional Resources Needed MUTCD Chapter 6I divides traffic incidents into three general incident classes based on the anticipated duration. What are they, and what are the time limits? - ACCURATE ANSWERS✔✔ -Minor: < 30 minutes - Intermediate: 30 minutes to 2 hours -Major: > 2 hours Refers to moving vehicles involved in an incident to a secondary location before being worked - ACCURATE ANSWERS✔✔ "Move It" Describes a situation where the vehicles involved cannot be moved to a secondary location before being worked. - ACCURATE ANSWERS✔✔ "Work It" Safe-positioned, as defined by the MUTCD, is the positioning of emergency vehicles at an incident in a manner that attempts to? - ACCURATE ANSWERS✔✔ 1. Protect the responders performing their duties 2. Protect road users traveling through the incident scene 3. Minimize, to the extent practical, disruption of the adjacent traffic flow True or False: The shoulder of a highway is considered a lane when establishing a block? - ACCURATE ANSWERS✔✔ True
A responder vehicle positioned to block a single lane or the shoulder is referred to as? - ACCURATE ANSWERS✔✔ Linear Block When the responder vehicle is positioned to block multiple involved lanes it is called? - ACCURATE ANSWERS✔✔ Multi-lane Block 2 ways a blocking vehicle can be positioned on the roadway? - ACCURATE ANSWERS✔✔ 1. Angled 2. Parallel Meaning the vehicle is positioned at an angle with respect to the travel lanes? - ACCURATE ANSWERS✔✔ Angled Block Meaning the vehicle is positioned parallel to the travel lanes or the shoulder? - ACCURATE ANSWERS✔✔ Parallel Block True or False: Turning a blocking vehicle's wheels so that they are not facing the incident space is a recommended practice referred to as critical wheel angle? - ACCURATE ANSWERS✔✔ True During initial incident response, it is typical for law enforcement, fire, and DOT or Safety Service Patrol vehicles to position? - ACCURATE ANSWERS✔✔ Upstream
During initial incident response, it is typical for ambulances, tow trucks, and other support units to position - ACCURATE ANSWERS✔✔ Downstream To ensure responder and motorist safety, it may be necessary to close additional lanes for a short time, a practice referred to as? - ACCURATE ANSWERS✔✔ Lane +1 Blocking Every block creates an area of danger between the blocking vehicle and moving traffic, commonly referred to as the? - ACCURATE ANSWERS✔✔ Zero buffer The use of a what during a traffic stop can reduce law enforcement exposure to the hazard of being in the zero buffer? - ACCURATE ANSWERS✔✔ Non-traffic side approach The ability of a vehicle to draw attention to its presence, even when other road users are not actively looking for it? - ACCURATE ANSWERS✔✔ Conspicuity Markings on responder vehicles are passive treatments that complement emergency lighting by using? - ACCURATE ANSWERS✔✔ - Contrasting colors that make the vehicle stand out -Fluorescent colors to increase daytime visibility -Retroreflective materials to maximize nighttime visibility
True or False: While an important tool for warning drivers, most emergency lighting does little to augment traffic control or guide drivers, therefore more is not always better where emergency lighting is concerned? - ACCURATE ANSWERS✔✔ True True or False: The use of too many lights at an incident scene can be distracting and can create confusion for approaching road users (and other responders), especially at night. - ACCURATE ANSWERS✔✔ True When multiple responder vehicles are present, only the rear-most (upstream) vehicles and blocking vehicles should continue the use of? - ACCURATE ANSWERS✔✔ emergency (warning) lights after appropriate traffic control is in place. All workers, including emergency responders, within the right-of-way of a roadway who are exposed either to traffic (vehicles using the highway for purposes of travel) or to work vehicles and construction equipment SHALL wear? - ACCURATE ANSWERS✔✔ high-visibility safety apparel True or False: Law enforcement personnel are exempt from MUTCD high-visibility safety apparel requirements when engaged in potentially confrontational law enforcement activities such as traffic stops and searches? - ACCURATE ANSWERS✔✔ True True or false: Police are required to wear high-visibility apparel any other time they are afoot near a roadway including directing traffic,
investigating crashes, or assisting other officers. - ACCURATE ANSWERS✔✔ True What does ICS stand for? - ACCURATE ANSWERS✔✔ Incident Command System Goals of ICS? - ACCURATE ANSWERS✔✔ 1. Safety of responders and others 2. Achievement of tactical objectives 3. Efficient use of resources When one individual is designated as Incident Commander and has complete responsibility for incident management. - ACCURATE ANSWERS✔✔ Single Command A joint management and authority structure in which two or more individuals share the role of Command. - ACCURATE ANSWERS✔✔ Unified Command Unified Command is most appropriate for major incidents involving? - ACCURATE ANSWERS✔✔ Multiple agencies Unified Command works together to develop and implement what? - ACCURATE ANSWERS✔✔ An Incident Action Plan (IAP)
An IAP identifies: - ACCURATE ANSWERS✔✔ 1. How the objectives will be accomplished 2. The resources needed to achieve those objectives For large-scale incidents, physical organization of a scene involves the establishment of what 4 things? - ACCURATE ANSWERS✔✔ 1. Traffic Incident Management Area 2. Incident Command Post 3. Staging Area(s) 4. Diversion routes if necessary A location where resources can be placed while awaiting tactical assignment, allow for the organization of personnel and equipment for immediate use at the incident scene as soon as they are needed? - ACCURATE ANSWERS✔✔ Staging Area The 4 main components of a Traffic Incident Management Area are? - ACCURATE ANSWERS✔✔ 1. Advance Warning Area 2. Transition Area 3. Activity Area 4. Termination Area Area that is established upstream of the incident to alert drivers of the upcoming incident scene. All advance warning devices should be placed so that they will provide enough warning for vehicles to slow before reaching the incident and any traffic queue that might form. - ACCURATE ANSWERS✔✔ Advance Warning Area Section of roadway where drivers are redirected out of their normal path. Usually involve the strategic use of tapers, which can be set up using cones or flares. - ACCURATE ANSWERS✔✔ Transition Area
Section of the roadway where incident response activities take place and is comprised of the buffer space and incident space. - ACCURATE ANSWERS✔✔ Activity Area Area used to notify drivers that the Traffic Incident Management Area is ending and they may resume normal driving. Includes the downstream buffer space and taper, which is in place to protect emergency responders working at the end of the Incident Space. - ACCURATE ANSWERS✔✔ Termination Area Separates the Transition Area from the Incident Space and provides a recovery area for errant vehicles. No vehicles should be positioned within this area. - ACCURATE ANSWERS✔✔ Buffer Space (Upstream) Location where the incident has occurred and emergency responders are working. A blocking vehicle should be positioned at the upstream end of this area to protect workers from impacts by errant vehicles. - ACCURATE ANSWERS✔✔ Incident Space True or False: Additional or extended advance warning may be necessary during adverse weather conditions, such as rain, fog, and/or snow. - ACCURATE ANSWERS✔✔ True Channelizing devices used to establish a taper are typically placed? - ACCURATE ANSWERS✔✔ No further apart in feet than the speed limit (i.e., in a 35 mph zone the cones would be placed 35 feet apart).
How far is the distance between striped traffic lines? - ACCURATE ANSWERS✔✔ 10 feet Traffic Cone Deployment Technique? - ACCURATE ANSWERS✔✔ 1. The responder retrieves available cones from the trunk placing one at the rear of the responder vehicle on the edge line 2. Walking along the shoulder, facing traffic, a cone is subsequently placed on the edge line at each skip line (alternatively, they can be placed every 10 paces) 3. When the last cone has been placed on the edge line, the responder begins walking backwards until the next cone is reached 4. The responder takes one lateral step into the travel lane and places the cone, immediately returning to the shoulder - facing traffic 5. The responder again walks backwards until the next cone is reached and then takes two lateral steps into the travel lane to place the cone, immediately returning to the shoulder 6. The steps are repeated until all cones are deployed Never turn your back....? - ACCURATE ANSWERS✔✔ On traffic The two types of buffers that may be established as part of the Traffic Incident Management Area are? - ACCURATE ANSWERS✔✔ - Longitudinal buffer spaces -Lateral buffer spaces. This buffer space covers the distance between the transition area and the incident Space, basically the space up to the blocking vehicle. By definition, it is a recovery area for errant vehicles, so no responder vehicles should be parked in the buffer space. - ACCURATE ANSWERS✔✔ longitudinal buffer space
This buffer space is the area between the incident space and the adjacent travel lanes, and can be beneficial because it allows more room for responders to work. It can be increased through the use of Lane + blocking when necessary. It is recommended that the entire lane be closed and that partial lane closures be avoided. - ACCURATE ANSWERS✔✔ Lateral Buffer Space This presents a danger zone that specifically includes the area directly in front of and behind the vehicle where projectiles, like gas-charged struts and pistons, may launch from the vehicle - ACCURATE ANSWERS✔✔ Vehicle Fire Where should you avoid, and remain during a vehicle fire incident? - ACCURATE ANSWERS✔✔ Avoid all sides. Remain uphill and upwind of the incident. Hazardous materials (hazmat) can be identified through? - ACCURATE ANSWERS✔✔ labels, markings, or placards. Where should placards be placed on transport vehicles? - ACCURATE ANSWERS✔✔ Each side and each end of the transport vehicle Placards are based on? - ACCURATE ANSWERS✔✔ Color-code based on the class of hazardous material being transported and contain a 4 digit number that can help to identify the material being transported
Steps to do once a HAZMAT spill has been identified as a vehicle fluid that does not meet reportable quantity thresholds: (5) - ACCURATE ANSWERS✔✔ 1. Stop leaking material at the source 2. Contain and limit the spill from spreading 3. Apply available absorbents 4. Remove material from travel lanes 5. Gradually restore traffic flow The foundation of traffic crash investigations involves? - ACCURATE ANSWERS✔✔ 1. the collection of info that ultimately helps understand when, where, and why crashes occur. 2. Investigations also help to identify who is at fault, enabling vehicle repairs and other compensation. Remember, all debris should be considered evidence until? - ACCURATE ANSWERS✔✔ law enforcement personnel indicates otherwise. Evidence which will most likely be lost, destroyed, or compromised once the scene has been cleared. Can disappear when walked on by responders, flushed away with water, or unintentionally swept away with a broom. - ACCURATE ANSWERS✔✔ Short-lived Evidence Tow operator responsibilities include? - ACCURATE ANSWERS✔✔ 1. Loading vehicles and departing the scene as quickly as possible. 2. Transporting occupants from towed vehicles to a safe location away from the incident. 3. Handling financial negotiations off-site. Final stage of incident response? - ACCURATE ANSWERS✔✔ Termination.
Termination includes? - ACCURATE ANSWERS✔✔ Demobilizing and removing all equipment, personnel and response vehicles, and restoring traffic flow to normal. Major activities during termination include: - ACCURATE ANSWERS✔✔ 1. Recovering the roadway from any damage caused by the incident 2. Removing temporary traffic control devices from the incident scene 3. Lifting the alternate route or detour restrictions 4. Informing drivers of the return to normal traffic flow conditions 5. Departure of the responders from the incident scene. Termination Checklist: - ACCURATE ANSWERS✔✔ 1. Let other responders know when you're leaving 2. Protect towers while they finish up 3. Check with Incident Commander prior to leaving 4. Make sure all personnel are accounted for 5. Let the TMC know that lanes are open.