STSC Practice Exam Questions with 100% Correct Answers | Verified | Updated 2024, Exams of Advanced Education

Download STSC Practice Exam Questions with 100% Correct Answers | Verified | Updated 2024 and more Exams Advanced Education in PDF only on Docsity! STSC Practice Exam Questions with 100% Correct Answers | Verified | Updated 2024 Which is an approach to infection control that states all human blood and certain human bodily fluids are treated as containing infectious pathogens? - Universal Precautions - Collection methods - Exposure control plans - Infectious disease Which is an example of an element in the Exposure Control Plan? - Materials handling procedures - Injury reporting procedures - Evacuation route determinations - Exposure determinations According to ANSI Z308.1, which are supplies that are required in a first aid kit? - Glucose meter, bandages, alcohol wipes, and gloves - Bandages, adhesive tape, cold packs, and CPR barriers - Gloves, respirator, coveralls, and thermometer pg. 1 professoraxe l - Bandages, respirator, coveralls, and gloves Which is the rate of compressions per minute that is required during CPR? 200-220 100-120 50-100 5-10 It is a BEST practice to gather what information when a worker is injured? - Worker’s name, medication employee is currently taking, and date of reporting - Worker’s name, body part injured, and date of injury. - Worker’s name, body part injured, and how the injury occurred - Worker’s name, date of injury, and worker’s activities prior to starting shift Which is a reasonable response time for a life-threatening injury? 5-10 minutes 15-20 10-12 3-4 pg. 2 professoraxe l Which position must the carriage of a forklift be while in motion? - Approximately two feet off the ground so the load can clear any debris in the path - As close to the ground as possible to reduce the chance of material falling - Above the cab so the operator can see clearly under the load - As high as the masts of the forklift will raise to move the load away from pedestrians When vehicles are parked, which can be used to prevent them from moving? Pry bar Preventers Chocks Stoppers When material is stacked on a pallet, which is the MOST stable pattern? Herringbone Overlapping Crossed Checkered pg. 5 professoraxe l _____ is the overall physiological response resulting from heat stress. Heat Strain _____ is often a precursor to heat stroke. Heat Exhaustion _____ is the dizziness and fainting caused by overheating, and usually occurs after prolonged standing or sudden rising from a sitting position. Heat Syncope The body's natural way to keep the ore body temperature from rising to unhealthy levels is through an increase in_____and_____. Heart Rate and Sweating _____and_____ are caused by the body's dehydration and depletion of salts from excessive sweating. Heat Cramps and Muscle Spasms _____ or WBGT measurements are used to determine when heat exposure hazards are present in the workplace. Wet Bulb Globe Temperature _____ is the most accurate tool for adjusting the temperature for heat stress factors including humidity, air movement, radiant heat, and temperature. pg. 6 professoraxe l WBGT Meter _____ has a matte black finish to measure the radiant energy from direct sunlight or other sources, like machinery and hot structures near the workplace. Black Globe Thermometer There are _____ different heat stress formulas depending on the environment. Two _____ is typically used by engineers to determine heating, ventilation, and air conditioning and mechanical needs by plot points that represent the exterior air conditions. Psychrometric Chart Safety professionals can also use the _____ produced by the National Oceanic and Atmospheric Administration (NOAA) to assess the heat related risk factor. Heat Index Chart The red area of the Heat index chart indicates_____. Extreme Danger _________ is a condition in which the body uses up its stored energy and can no longer produce heat. Hypothermia Internal body temperature is also known as_____. pg. 7 professoraxe l Generation X Millennials _____ is the process of enabling groups to work cooperatively and effectively. Mentoring Facilitation Management Policy Statement Multidisciplinary team work T/F? Multidisciplinary teams are valuable due to the expanded knowledge and competencies that team members can bring to discussions. True T/F? Positive, immediate feedback is an example of an effective leader. True Different cultural perspectives on safety, beliefs, opinions, values, experiences, poor communication, change of the status quo, and limitations are all potential reasons for _____. Education Conflict Incidents Violence pg. 10 professoraxe l Which method seeks to find a mutually effective solution to a problem or challenge by including both parties; solutions? Compromising Accommodating Withdrawing Collaborating Compromising, collaborating, avoiding or withdrawing, accommodating, and forcing or competing are all primary methods of _____. Resolving conflict Effective Management Effective Leadership Communicating Which is the most productive management technique? Preventing conflict Accommodation Compromising Active listening T/F? Pre-employment screening practices must, however, be consistent with privacy protections and anti-discrimination laws. pg. 11 professoraxe l True T/F? A defensive, hostile attitude and a tendency to blame others for problems is a red flag when hiring a new employee. True T/F? Employees should be trained in identifying hazardous situations, relevant policies, security equipment, diffusion of threatening situations, and how to get help. True T/F? Management should only share workplace violence prevention evaluation reports with their director. False Which is offered to victimized and traumatized employees? Time off Medication Meditation Centers Employee Assistance Programs How long should workers acclimatize themselves by gradually increasing the duration and magnitude of their work when working in hot or tropical environments? 8-10 Days Which is the MINIMUM clearance for cranes for 50 kV or lower power lines? pg. 12 professoraxe l Which is the PRIMARY purpose of a sliding trench shield or portable trench box? A safe area for workers Which is considered the best safety practice to protect a user of electric power tools from shock, burns, and electrocution? Use a ground fault circuit interrupter device A worker approaches you complaining of a constant ringing in the ears and temporary hearing loss. Which is the BEST course of action? Conduct a work site inspection to determine whether noise hazards are present and if other workers are adequately protected. Which is the FIRST step in the process of developing a fall- rescue plan for work at height? Fall-hazard survey Which is the MOST serious hazard associated with fuel- powered tools? Flammable vapors Which terms best describes the analysis by managers and employees for the purpose of identifying and eliminating existing or potential hazards? Hazard Analysis pg. 15 professoraxe l Which type of working platform is built using rigid, load- bearing members, such as poles, legs, frames, and outriggers? Supported Which type of respiratory protection equipment removes contaminants from air PRIOR to it entering a worker's respiratory system? Air purifying device After an incident has occurred, which is the PRIMARY purpose for the investigation? To prevent recurrence of the incident At a minimum which length of an extension ladder should be used to access the top of a 25 ft. tank? (ANSI A14.2-1990, Table 23) 30 ft. (9.1 m) Who has the PRIMARY responsibility for effectively communicating the hazards and hazard control measures associated with a new hazardous chemical when it is introduced for use in a work area? Supervisor Which hearing protection would be the BEST choice for a worker who performs tasks in a noisy environment considering their hands are routinely soiled by those work tasks? pg. 16 professoraxe l Foam ear plugs Earth-moving or material-handling equipment should be fitted with structures that protect their operator. From which hazard does a protective structure on mobile equipment protect employees? Being crushed Which is included in the pre-task inspection for a fire watch? Fire watch is present. When working at a heights on a project, where would a worker find information on fall protection procedures for the task being performed? Site safety plan Which of these topical areas are both included in safety data sheets? First-aid measures and hazard identification Which is a major factor in decreasing slips, trips, and fall injuries? Good housekeeping If an electrical component cannot be locked out due to its physical construction, which method should be used to ensure that it presents a de-energization boundary for work? A tagout program and components pg. 17 professoraxe l Metal fume fever Which is the MINIMUM permissible oxygen level for workers? 19.5% Which characteristic describes an ergonomically designed job that could be performed without excessive stress by a majority of workers? Workers follow strict movement patterns designed by accredited engineering staff and systems designers. Which statement is TRUE regarding a confined space? It is not designed for continuous employee occupancy. Which position is ultimately responsible for the safe operation of a motor vehicle? Mechanic Driver Employer Supervisor A worker recently brought a safety hazard to the attention of their supervisor. The supervisor conducted a job risk assessment and determined that there were several hazards associated with the worker's job that had the potential to cause injury. What is this an example of? Recognizing and controlling hazards pg. 20 professoraxe l What is considered Type 3 workplace violence? Assault of a manager from a recently terminated employee Which group/function should be included on the team conducting site construction audits? Employee representatives Which is a good assumption for supervisors to make concerning employees? Never expect employees to do jobs they are not trained to do. Which method is used to reduce the rick of struck-by injuries caused by powered industrial trucks? Providing more clearance at passageways and corners Which action should a worker take when operating a crane that comes in contact with live power lines? Stay in the cab Which is a precaution taken to prevent rollout when using a snap hook? Only attach one snaphook to a horizontal lifeline When teaching CPR, which personal protective equipment should workers be trained to use? Face masks Which term BEST describes the concept of designing the workplace to match body dimensions? pg. 21 professoraxe l Ergonomics Which hazard control is best described when work rotations, policies, and directives are being used? Administrative Who is responsible for all training, hazard communications, and approved equipment for welding and cutting activities? Management personnel Which are symptoms of heat stroke? Hot, red, dry skin; confusion; loss of consciousness When using a platform to hoist personnel, which MINIMUM design safety factor must the platform have? 5:1 Which signal word is for the LESS severe chemicals hazards under the globally harmonized system (GHS) for classifying chemicals? Warning According to the BCSP Code of Ethics, how and when should certificants provide public statements? Only in an objective and truthful manner and only when founded upon the knowledge of the facts and competence in the subject matter. pg. 22 professoraxe l In order to secure the upper end of a ladder's side members to a scaffold landing place, how far should the ladder rise above the landing place? A minimum of 3.3 feet (1 m.) When are employees required to complete training in the operation of powered industrial trucks? Before being assigned to drive a powered industrial truck How should compressed gas cylinders be stored? Upright and secured, with protective caps Which is the one-on-one observation method used to complete a job hazard analysis (JHA)? The supervisor selects the job they wish to analyze and then chooses the worker to collaborate with on the JHA. Which statement is true in a supervisory relationship in regards to safety? You get the behavior you accept. According to the BCSP Code of Ethics, which action is taken if any professional misconduct is witnessed? Take steps to bring that misconduct to the attention of the Board of Certified Safety Professionals. Which type of stress can occur when work stations, tools, or equipment do not fit the worker or task well? pg. 25 professoraxe l Physical According to the BCSP Code of Ethics, when should public statements be made? Only when provided in an objective and truthful manner Which is the FIRST step an employee should take when preparing to work on or around energized equipment? Become familiar with the specific lockout/tagout procedures for the equipment. Which is the distance of the fall from the point of the attachment to the activation of the fall protection equipment called? Free-fall distance Which type of hard hat is best used by workers in the electrical industry? Class E At a minimum, which of the following should be included in incident investigation reports? Date of incident, description of incident, factors contributing to the incident, and recommendations resulting from the incident. Solid particles generated by handling, crushing, or grinding materials describes which airborne material? Dust pg. 26 professoraxe l When should a hardhat be replaced? When it shows signs of cracks, deformed brim/shell, or deteriorate suspension system Protective helmets are required when there is a danger from impact or falling or flying objects, and in which other situation? There is a risk of electric shock and electrical burns. Which signal word is for the LESS severe chemical hazards under the globally harmonized system (GHS) for classifying chemicals? Caution The BCSP Code of Ethics requires certificants to seek opportunities to be of constructive service in civic affairs and work for the advancement of the safety, health, and well- being of their community and their profession by sharing their knowledge and skills. Which action aligns with this principle? Mentoring a younger EHS leader in your organization Which physical agent is a hazard in the form of a vibration that can pass through solids, liquids, or gases? Noise Which devices de-energizes a circuit when a current to ground is higher than a predetermined level? Ground-fault circuit interrupter pg. 27 professoraxe l