Download 2021 Construction Cost Sheet and more Study notes Construction in PDF only on Docsity!
All Cost Listed are Maximum Allowable Cost SOFT COST DESCRIPTION & MATERIAL COST SPECIFICATIONS / OTHER INFORMATION Building Permits (^) Per Job Site Local Cost Posted on job site. DEMO DESCRIPTION COST OTHER INFORMATION Floor Per Square Foot of floor $2.35 Demo floor down to floor joist. Ceiling Per Square Foot of ceiling $1.75 Demo ceiling to ceiling joist. Walls Per Square Foot of wall $1.50 Demo wall down to Studs. Floor, Walls and Ceiling Per Square Foot of floor area $4.15 Demo floor, walls and ceilings down to joist and studs. Bath Room Floor Per Square Foot of floor $6.50 Demo floor down to floor joist. Bath Room Per Square Foot of floor area $10.00 Demo floor, walls and ceiling down to joist and studs. EXTERIOR DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION
Three Tab Roofing Shingles Per Square 2/12 to 8/12 pitch $250.
Complete roof system. Includes complete tear off, Synthetic Felt, Drip Edge, Valley Lining/ Ice & Water, Ridge Vent, Pipe Boots, Penetration Flashings and Dump/ Disposal Fees. Racking Application of Shingles is Prohibited. IKO Shingles Prohibited.
Architectural Roofing Shingles Per Square 4/12 to 8/12 pitch $280.
Complete roof system. Includes complete tear off, Synthetic Felt, Drip Edge, Valley Lining/ Ice & Water, Ridge Vent, Pipe Boots, Penetration Flashings and Dump/ Disposal Fees. Architectural style shingles prohibited on pitches less than 4/12. Racking Application of Shingles is Prohibited. IKO Shingles Prohibited. Underlayment / Felt Per Square 2/12 up to 4/12 pitch $7.00 Double synthetic underlayment for roof pitch 2/12 up to 4/12. Additional Layers of shingles Per Square $17.75 Per additional layer, includes dump/disposal. Additional for Steep Pitch Per Square 9/12 to 10/12 pitch $12. Additional for Steep Pitch Per Square 11/12 to 12/12 pitch $24.
Additional for Steep Pitch Per Square 13/12 plus pitch $35.
Masonry Chimney Flashing, Large Per Chimney 49" Wide and up $300.
Step and Counter Flashing to be factory painted 0.019 " thickness minimum, 4"h X 4"w X 8"L minimum step. Counter flashing to be cut in 1" deep crimped over and sealed with roof caulk. Includes Ice & Water on deck and up sidewall.
Masonry Chimney Flashing, Small Per Chimney up to 48" wide $200.
Step and Counter Flashing to be factory painted 0.019 " thickness minimum, 4"h X 4"w X 8"L minimum step. Counter flashing to be cut in 1" deep crimped over and sealed with roof caulk. Includes Ice & Water on deck and up sidewall.
Step / Continuous Flashing Per Linear Foot $1.
Factory painted 0.019 " thickness minimum, 4"h X 4"w X 8"L minimum step. Includes Ice & Water on deck and up sidewall. Step and Counter Flashing Per Linear Foot $3.60 Factory painted 0.019 " thickness minimum, 4"h X 4"w X 8"L minimum step, Counter flash to be cut in 1" deep crimped over and sealed with roof caulk. Includes Ice & Water on deck and up sidewall. Cricket Small Each $175.00 Complete installation up to 48" wide.
2021 Construction Cost Sheet
Cricket Large Each $250.00 Complete installation 49" wide and up.
Chimney Removal Each Detailed Quote
Must permanently cap in attic and permanently close off in home. Inspector to review all details and approve costs. Estimates required. Retro Pipe Boot Each $60. Modified Bitumen Per Square 0/12 to 2/12 $475.00 Complete system, includes dump/disposal.^ NO TORCH DOWN^. EPDM Per Square 0/12 to 2/12 $590.00 Complete system, includes dump/disposal. Gaco Roof 100% Silicone Roof Coating Per Square $355.00 Complete system includes pressure washing roof deck
Metal Roofing Per Square Detailed Quote
Only with approval of inspector. Must include all trims. Inspector to review all details and approve costs. Estimates required
Other Roofing TPO, Hydostop, etc. Detailed Quote
Only with approval of Inspector to review all details and approve costs. Estimates required Roof Decking/ OSB, Plywood Per Sheet (4' X 8') $65. Roof Decking/1X Material Per Linear Foot $2. Rain Diverter 10' Section $30. Shingle Molding Per Linear Foot $2.75 Painting included. Gutters and Downspouts Per Linear Foot $10.00 6" Seamless. Wood Fascia Per Linear Foot $6.80 Finished. Wood Soffit Per Linear Foot $9.15 Finished, includes ventilation. Soffit Vents Each, 4" Round or 16" X 8" $11.80 For use with existing wood soffits. Metal Fascia Wrap Per Linear Foot $7.10 Includes replacement of damaged lumber. Vinyl Soffit Per Linear Foot $9.45 Includes replacement of damaged lumber. Complete Vinyl Boxing, Fascia and Soffit Per Linear Foot $14.25 Includes replacement of damaged lumber. Vinyl Siding Per Square .040 or Better $220.00 Complete siding system. Excludes Fanfold Insulation. Fanfold Insulation Per Square $41.00 Backing for vinyl installation. T-111 (5/8) Installed (per 4' X 8' sheet) $88.50 Complete installation. Exterior Painting Per Square Foot $5.00 Primed with two coats of paint. HVAC 14 SEER MINIMUM DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION Split System Per Ton, New Installation $3,100.00 All new components ducts, boots, registers, grills, return, thermostat, etc. Split System Per Ton, Equipment Replacement $2,100.00 All new equipment including digital thermostat. Packaged System Per Ton, New Installation $2,800.00 All new components ducts, boots, registers, grills, return, thermostat, etc. Packaged System Per Ton, Equipment Replacement $1,900.00 All new equipment including digital thermostat. Duct Replacement Per Ton, Duct Replacement $1,000.00 All new duct work, boots, registers, grills and return. Cross Over Duct Per Linear Foot $12.00 Cross over duct in mobile homes. Sealing off Deleted Boots Each $23.50 Capped tapped and mastic. When moving system from floor to ceiling. Duct Repair Detailed Quote Inspector to review all details and approve costs. Estimates required Return New Return $300.00 New return when needed with equipment replacement. Mini Split System Per Ton, New Installation $3,100.00 New Mini Split system, minimum 15 seer, removal of existing system. DOORS and WINDOWS DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION
Shower Slide Bar with Head Delta, American Standard, Moen $180.00 No plastic, complete installation. ADA approved. WaterSense approved. Hand Held shower Head Delta, American Standard, Moen $120.00 No plastic, complete installation. ADA approved. WaterSense approved. ADA Shower Chair Free Standing $95.00 ADA approved. Grab Bars Each $90.00 ADA approved. Shower Head Replacement $48.00 WaterSense approved. 24" Vanity Vanity with Top and Side Splashes, as needed $295.00 Complete installation of unit, all new plumbing. Add faucet. 30" Vanity Vanity with Top and Side Splashes, as needed $360.00 Complete installation of unit, all new plumbing. Add faucet. 36" Vanity Vanity with Top and Side Splashes, as needed $415.00 Complete installation of unit, all new plumbing. Add faucet. Vanity Faucet Delta, American Standard, Moen, New Components $180.00 No plastic, complete installation. ADA approved. WaterSense approved. Medicine Cabinet Recessed or Surface Mounted $60. Exhaust Fan Replacement $120.00 70 CFM minimum, vented to exterior. Exhaust Fan New installation $220.00 70 CFM minimum, complete installation, vented to exterior. Towel Bars and Paper Holders Each $30. Toilet Each, New Components $360.00 Complete installation, ADA approved, WaterSense approved. KITCHEN DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION Kitchen Faucet Delta, American Standard, Moen, New Components $210.00 No Plastic, complete installation, ADA approved Kitchen Sink Stainless, 8" Deep, Strainers, New Components $360.00 Complete installation. Add Faucet. Base Cabinets Per Linear Foot, Prefinished $200.00 Complete installation. Includes demo. Wall Cabinets Per Linear Foot, Prefinished $175.00 Complete installation. Includes demo. Counter Top Per Linear Foot $50.00 Complete installation, including all endcaps. Includes demo. Range Hood Vented Replacement $200.00 250 CFM minimum unit. Range Hood Vented New Install includes Electrical and Ducting $425.00 250 CFM minimum unit. Range Hood Non-Vented Replacement $200. Range Hood Non-Vented New Install includes Electrical $350. ELECTRICAL DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION Rewire Whole House Everything New, Including Fixtures per 2018 IRC Detailed Quote Inspector to review all details and approve costs. Estimates required
200 AMP Service Upgrade Wire, Mast, Meter Base, Panel Box, Breakers Detailed Quote
With 200 Amp disconnect. Inspector to review all details and approve costs. Estimates required. Sub Panel Complete Install $325.00 Sub panel for HVAC install. Panel Box Complete Install $600.00 Replacement of existing panel box and breakers Branch Circuit / Home Run 15 or 20 Amp with Arch Fault Breaker $180.00 New circuit from panel box for smokes, lighting or receptacles. Branch Circuit / Home Run 30 to 60 Amp with Breaker and Disconnect $240.00 New circuit from panel box for water heaters and HVAC equipment. Service Disconnect Disconnect for HVAC or Water Heater $60.00 For use with existing wiring. GFCI Exterior Unit with Weather Proof Components $90.00 Upgrade an existing receptacle to GFCI. GFCI Interior Unit $55.00 Upgrade an existing receptacle to GFCI. Switches and Receptacles New Devices with Cover Plates $20.00 Swap out. Light Fixture Small, Single Bulb $60.00 Swap out, Energy Star.
Light Fixture Large, Two or Three Bulb $90.00 Swap out, Energy Star. Light Fixture Fluorescent 4', Two or Four Bulb, Wrapped Fixture $120.00 Swap out, Energy Star. Ceiling Fan 52" 52" with Light Kit $210.00 Swap out, Energy Star. No cheap fans. Fan allowance $125.00. Smoke Detector Device Replacement $30.00 Replacement of out of date or missing hardwired detector. Smoke and Carbon Monoxide Detector Device Replacement $60.00 Replacement of out of date or missing hardwired detector. Smoke Detector Each, Hardwired $120.00 New install includes all electrical. Per 2018 IRC. Smoke and Carbon Monoxide Detector Each, Hardwired $150.00 New install includes all electrical. Per 2018 IRC. Wireless Smoke and Carbon Monoxide Detector Each $100.00 With Inspector approval only. Must be interconnected with 10 yr. battery. PLUMBING DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION Replumb Whole House Water and or Sewer Lines Quote Inspector to review all details and approve costs. Estimates required Stop Valves, Ball Valves or Boiler Valves Each $45.00 Complete installation with escutcheon or flange as required. Metal Braided Supply Lines Each $20.00 Metal Braided Supply Line Water Heater Electric 38-40 Gal., 6 Year Minimum Warranty $900.00 Swap out complete installation with all new components. Water Heater Gas 40 Gal., 6 Year Minimum Warranty $950.00 Swap out complete installation with all new components. Thermal Expansion Tank Each $90.00 Complete installation with all new components. Gas Line Gas Line Replacement $95.00 Complete installation with new components. Heater Hut Insulated Hut, Use Proper Model Gas or Electric $500.00 Complete installation with pad. Add $75.00 for gas heater with stack. Relocate (^) Electric Water Heater Relocation $120.00 With inspector approval only. Relocate Gas Water Heater Relocation $240.00 With inspector approval only. Tankless Gas Water Heater 5.5 GPM Minimum, Swap Out from Tank to Tankless $2,000.00 Complete installation with all components. Septic System Complete System, Tank and Drain Field QUOTE Inspector to review all details and approve costs. Estimates required. Septic Drain Field Drain Field QUOTE Inspector to review all details and approve costs. Estimates required. Septic Tank Pump Out Pumping of Tank for Repairs QUOTE Inspector to review all details and approve costs. Estimates required. Water Well Complete New Well System. Post Test Results QUOTE Inspector to review all details and approve costs. Estimates required. Water Well Repair of Existing Well System. Post Test Results QUOTE Inspector to review all details and approve costs. Estimates required. INSULATION DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION R-13 Fiberglass Batt Per Square Foot $1.20 Wall insulation. R-19 Fiberglass Batt Per Square Foot $1.30 Floor insulation. R-30 Fiberglass Batt Per Square Foot $2.40 Attic or Ceiling insulation where blown-in will not work, or for a repair. R-30 Blown-In Per Square Foot $1.50 Attic insulation. R-value card must be installed, signed and dated. Attic Stair Insulator Each $110.00 Attic Stair Insulator / Tent. Vapor Barrier Per Square Foot $0.75 Crawl space. FOUNDATION DESCRIPTION & MATERIAL M&L COST OTHER INFORMATION Automatic Foundation Vents Each $40. Foundation Vent Each $30. Foundation Vent Well Each $35. Jack Post Each, Steel Detailed Quote Inspector to review all details and approve costs. Estimates required.
