ASNT Level III Study Guide Basic
Which of the following statements is true concerning the usage of SNT-TC-1A? - SNT-TC-1A
is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The
inquiry must be: - Written and stated in general terms
With regard to the training of NDT personnel, the employer: - May engage an outside
service but is, nevertheless, responsible for the certification of the company's NDT
personnel
SNT-TC-1A is intended as a guideline for employers: - To establish their own written
practice that must be used as a strict specification.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not
be appropriate for certain employers; circumstances and / or applications." What should
be done if the guidelines are not appropriate? - The employer should review the detailed
recommendations and modify them as necessary to meet its particular needs.
Who should be responsible to assess whether or not an individual should be qualified and
certified who does not perform NDT, but monitors and evaluates NDT? - The individual's
employer.
To which of the following NDT methods is SNT-TC-1A currently not applicable -
Holographic testing
ASNT intended that the recommendations of SNT-TC-1A be applied - With flexibility and
reason
Of the following, which is most appropriate to determine the needs to qualify and certify
personnel whose only NDT function is to operate digital thickness equipment. - The
employer.
Certification is - Written testimony of qualification.
Use of SNT-TC-1A is mandatory when: - It has been specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are: - Level I, II, III.
Should personnel that operate ultrasonic digital thickness measurement equipment to
qualified and certified - Weather any NDT personnel should be qualified and certified
depends solely upon the needs of the employer and the requirements of the employer's
customers or clientele.
