Download BMW Associate Level ASE Test Exam Questions & Answers (PDF) | 2026 Prep and more Exams Engineering in PDF only on Docsity!
BMW ASSOCIATE LEVEL ASE TEST EXAM WITH ACCURATE
QUESTIONS AND ANSWERS
- a lifting pad must be in place to lift a BMW vehicle, T or F?>ANS True
- Under which section in TIS is the User Manual for the DEUTRONIC battery charger located?>ANS Tools and Equipment
- Regarding BMW instrument cluster test function.
Tech A states the cluster can be unlocked, and a test function can be used to display fuel level reading in liters.
Tech B states current BMW instrument clusters are unlocked by using sum of the last 5 digits of the VIN>ANS Both A and B
- Which BMWVehicles use LI-Ion Battery?>ANS F80 / F82 / F
- When using a floor jack to lift a vehicle, the technician is permitted to lift the rear axle from the Diff Cover, T or F?>ANS False
- Regarding emergency release of park to neutral on 2015 BMW automatic trans.
Tech A says it can be released Manually
Tech B says it can be released Electrically>ANS Both A and B
- Material safety data sheet are documents that contain info of potential hazards.
Tech A says they contain info on health, fire, reactivity and environmental effects.
Tech B states the CBS reset plan can also be found in functions structure tab.>ANS Neither A or B 1 2. What does AZD stand for?>ANS Torque Specifications 1 3. What kind of documents can typically be found under the trouble shooting tab?>ANS SSP and FUB 1 4. Tech A says that checking Teileclearing is not the responsibility of the Tech
Tech B says that is teileclearing is an authorization list to replace the part>ANS
Neither A or B 1 5. The warranty procedure and policy manual can be found in center net. tech A says you can use the multi search in the menu tab to find it tech B says you can use the service information tab in TIS>ANS Both A and B 1 6. BMW recommends replacing tire at least every 6 years
what resource can you use to determine that the above statement is correct?- >ANS Owners ManuaI 1 7. Under which TIS Tab can you find and oil capacity chart>ANS TechnicaI Docu- mentation
1 8. Information on which of the following can be found in the AIR user guide?
Filtering the hitlist
Tech A says that the digital compass and clock need to be set/calibrated
Tech B says that you need to activate and verify optional series xm satellite radio (option 655)>ANS Both A and B
- New Vehicle Prep can be found under the main group: Maintenance and general info Warranty After sales Information Systems>ANS Maintenance and general info
- BMW special took 83 30 0 492 467 can be used during an inspection to measure; Coolant level Coolant concentrate Brake pad thickness and tire thread depth Air pressure>ANS Brake pad thickness and tire thread depth
- Tech A states that during a Quality Certification 1 on a G05 X5 it is necessary to press the 'AUTO' button in the light switch cluster.
Tech B states that during a Quality Certification 1 on a G05 X5 you can use the same QC1 inspection sheet as a G02.>ANS Both A and B
- If the vehicle is placed in transport mode and the vehicle battery voltage drops below 12 volts (approximately 30% State of Charge), the "Replace Battery" message will be displayed in the instrument cluster.
BMW center prior to customer delivery, the DOT numbers from the accessory tires must be recorded on an individually printed QC1 checklist.>ANS Both A and B
- Vehicle history on a specific vehicle can be retrived from DCSnet.
Technician A says that the whole VIN number is required to access the infor- mation.
Technician B says that only the last 7 of the VIN are required to access the information.
Who is correct?>ANS B Only
- According to MSDS warning symbols, the warning symbol with a skull and cross bones shown represents>ANS Acute toxicity
- All of the following are true concerning the Roundtable, EXCEPT :There are 1 2 shows each year. Each Roundtable has a bulletin describing the topics. The Roundtable is accessed through AIR. Each Roundtable has a quiz>ANS The Roundtable is accessed through AIR.
- The TeileClearing list is updated if needed on : The last day of the month. The 25th of each month. The 1 st day of the month.
The 1 st day of each quarter>ANS The 1 st day of the month.
- Technician A says that SIBs can be found in TIS under Service Information.
Technician B says that SIBs can be found in TIS under Technical Documenta- tion.
Who is correct?>ANS A only
- In TMSi, what is the path to check the progress of your BMWTechnical Levels?
Technician A states that you can click on the Navigation Menu, select learning, view your transcript, find the tab that says BMWTechnical Levels Learning Path.Then, you can either select the title BMWTechnical Levels Learning Path or the Open Curriculum tab to view your transcript.
Technician B states if you want to learn about finding your transcript and progress watch the 'Tech Training Graphical Learning Path' video.
- All BMW special tools are autoship to the dealer.
True or False?>ANS False
- Technician A states that there is a complete autoship tool report of what BMW special tools autoship to the dealer.
Technician B states that there is a complete tool report of all the BMW special tools including the ones that autoship to the dealer.
Who is correct?>ANS Both A and B
- WAF1 1 is shown in the thread section of an AZD. What does WAF stand for?>ANS Width Across the Flats
- In an AZD, the thread section shows M1 2-1 g.9, what does 1 g.9 represent?- >ANS Grade
- CPO inspections require a minimum tread depth of 3 mm, as measured from the lowest area in the tread. T or F?>ANS False (from top of wear indicators)
- A technician should consider which of the following questions for a quality control process after performing service work to a vehicle?
Technician B says that on a G series vehicle; activate the vehicle by pressing the start/stop button. Then deactivate the vehicle by pressing the start/stop button again within 3 seconds. Then hold the wiper stalk in the up position.
Who is correct?>ANS A only
- Engine oil Top-up services may be reimbursed under the terms of the BMW Maintenance Program when it is "active" on the vehicle.>ANS True
- During a CPO inspection, a front brake pad measurement is taken of 4mm on the left inner pad and 7mm on the left outer pad.
Technician A says the pads are within specifications.
Technician B says the inner pad is at the minimum allowed specifications.
Who is correct?>ANS Neither A or B
- During a CPO inspection, which of the following will irreversibly disqualify a vehicle from the CPO program: Modified suspension Aftermarket windshield
circult?>ANS Voltage Drop
- When performing a voltage drop test, the meter is measuring:>ANS The
differ- ence in voltage between the two points.
