CHAPTER 7 RIGGING EQUIPMENT MAINTENANCE OVERVIEW |, Exams of Automobile Engineering

Download CHAPTER 7 RIGGING EQUIPMENT MAINTENANCE OVERVIEW | and more Exams Automobile Engineering in PDF only on Docsity!

CHAPTER 7 RIGGING EQUIPMENT

MAINTENANCE OVERVIEW |LATEST

QUESTIONS WITH VERIFIED ANSWERS

Rigging - correct-answer - All rigging slings, attachments, hardware, and fittings must be inspected before each use. Inspection before use - correct-answer - A(n) inspection is a rigging equipment inspection performed before the equipment is placed into service in which a designated person ensures that the equipment meets the applicable government regulations and industry standards. Inspection records - correct-answer - Written records of the use and inspection of all rigging equipment should be created for each new item.

Periodic inspections - correct-answer - Periodic inspections are performed on at least a (n) designated person under normal service conditions. Frequent inspection - correct-answer - A(n) inspection is a rigging equipment inspection performed at the beginning of each workday or shift by the user of the equipment. Inspection interval - correct-answer - Periodic inspections are only performed if the equipment has been used during the inspection interval. Inspection basis - correct-answer - Periodic inspections are performed on at least a semiannual basis.

Inspection types - correct-answer - Periodic inspections are performed at least annually. Inspection by user - correct-answer - A(n) frequent inspection is performed at the beginning of each workday or shift by the user of the equipment. Hardware components - correct-answer - Hardware components are typically less durable than most slings and are much smaller, so they should be stored individually. Degradation of synthetic fiber - correct-answer - Synthetic fiber slings are vulnerable to degradation from ultraviolet light, so they should be stored out of sunlight and away from areas used for chemical treatment.

Wear inspection - correct-answer - As part of frequent or periodic inspections, all rigging hardware should be inspected for wear exceeding 10% of the original cross section dimensions. Hook throat inspection - correct-answer - A hook throat should be inspected to ensure the opening has not increased by more than 5% or 1/4". Repair guidelines - correct-answer - When repairs are feasible, they must be performed by a qualified person using the guidelines of the manufacturer or the appropriate standard. Inspection frequency - correct-answer - A(n) inspection is a thorough rigging equipment inspection performed at regular intervals.