Conduit – Study Guide and Test, 2026 – Reference and practice material-5.docx, Exams of Advanced Education

Conduit – Study Guide and Test, 2026 – Reference and practice material-5.docx

Typology: Exams

2025/2026

Available from 04/01/2026

Toperthetop
Toperthetop 🇬🇧

3

(6)

27K documents

1 / 5

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Conduit – Study Guide and Test, 2026 –
Reference and practice material
Which NEC Article covers Intermediate Metal Conduit (IMC) - correct answer
✔✔ Art. 342
Which NEC Article covers Electrical Metallic Tubing (EMT) - correct answer ✔✔
Art. 358
Which NEC Article covers Rigid Polyvinyl Chloride Conduit (PVC) - correct
answer ✔✔ Art. 352
Which NEC Article covers Rigid Metal Conduit (RMC) - correct answer ✔✔ Art.
344
Article ? of the NEC states that RMC shall be supported every ? , and within ?
of each junction box - correct answer ✔✔ 344 / 10' / 3'
Match the conduit/size with the appropriate protective cap. - correct answer
✔✔
1/2" Rigid Metal Conduit (RMC) - correct answer ✔✔ Black
3/4" Rigid Metal Conduit (RMC) - correct answer ✔✔ Red
1" Rigid Metal Conduit (RMC) - correct answer ✔✔ Blue
1/2" Intermediate Metal Conduit (IMC) - correct answer ✔✔ Yellow
pf3
pf4
pf5

Partial preview of the text

Download Conduit – Study Guide and Test, 2026 – Reference and practice material-5.docx and more Exams Advanced Education in PDF only on Docsity!

Conduit – Study Guide and Test, 2026 –

Reference and practice material

Which NEC Article covers Intermediate Metal Conduit (IMC) - correct answer ✔✔ Art. 342 Which NEC Article covers Electrical Metallic Tubing (EMT) - correct answer ✔✔ Art. 358 Which NEC Article covers Rigid Polyvinyl Chloride Conduit (PVC) - correct answer ✔✔ Art. 352 Which NEC Article covers Rigid Metal Conduit (RMC) - correct answer ✔✔ Art. 344 Article? of the NEC states that RMC shall be supported every? , and within? of each junction box - correct answer ✔✔ 344 / 10' / 3' Match the conduit/size with the appropriate protective cap. - correct answer ✔✔ 1/2" Rigid Metal Conduit (RMC) - correct answer ✔✔ Black 3/4" Rigid Metal Conduit (RMC) - correct answer ✔✔ Red 1" Rigid Metal Conduit (RMC) - correct answer ✔✔ Blue 1/2" Intermediate Metal Conduit (IMC) - correct answer ✔✔ Yellow

3/4" Intermediate Metal Conduit (IMC) - correct answer ✔✔ Green 1" Intermediate Metal Conduit (IMC) - correct answer ✔✔ Orange Which types of conduit are available in sizes of up to six inches in diameter?

  • correct answer ✔✔ RMC, PVC Rigid metal conduit may be constructed of which of the following materials? - correct answer ✔✔ Stainless steel, Steel, Red brass, Aluminum Choose the smallest and largest trade sizes of the following raceways. - correct answer ✔✔ Electrical Metallic Tubing (EMT) - correct answer ✔✔ 1/2" - 4" Rigid Metal Conduit (RMC) - correct answer ✔✔ 1/2" - 6" Rigid Polyvinyl Chloride Conduit (PVC) - correct answer ✔✔ 1/2" - 6" Intermediate Metal Conduit (IMC) - correct answer ✔✔ 1/2" - 4" PVC Coated Conduit - correct answer ✔✔ 1/2" - 6" The trade name for PVC-coated conduit is?. - correct answer ✔✔ Robroy What is the thickness on the PVC coating on PVC-coated conduit? - correct answer ✔✔ 40 mils

What is the take-up for a Bender size 1/2"? - correct answer ✔✔ 5" What is the take-up for a bender size 3/4"? - correct answer ✔✔ 6" What is the take-up on a Bender size 1"? - correct answer ✔✔ 8" What is the take-up for Bender size 1 1/4" ? - correct answer ✔✔ 11" Distance Multiplier for 5°? - correct answer ✔✔ 11. Distance Multiplier for 10°? - correct answer ✔✔ 5. Distance Multiplier for 15°? - correct answer ✔✔ 3. Distance Multiplier for 22 1/2°? - correct answer ✔✔ 2. Distance Multiplier for 30°? - correct answer ✔✔ 2. Distance Multiplier for 45°? - correct answer ✔✔ 1. Shrink Constant for 5°? - correct answer ✔✔ 0. Shrink Constant for 10°? - correct answer ✔✔ 0. Shrink Constant for 15°? - correct answer ✔✔ 0.

Shrink Constant for 22 1/2°? - correct answer ✔✔ 0. Shrink Constant for 30°? - correct answer ✔✔ 0. Shrink Constant for 45°? - correct answer ✔✔ 0. The most common method for making an offset is the multiplier method. - correct answer ✔✔ True Shrink is determined by multiplying the? by the offset rise. - correct answer ✔✔ Shrink constant Which benchmark on the bender is typically used when making offsets? - correct answer ✔✔ The arrow