CTSP Practice test UPDATED, Exams of Nursing

CTSP Practice test UPDATED with questions and answers

Typology: Exams

2025/2026

Available from 04/30/2026

nurse-polly
nurse-polly 🇺🇸

342 documents

1 / 9

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
CTSP PRACTICE TEST UPDATED WITH QUESTIONS
AND ANSWERS
1. When your work obstructs any part of the roadway , advance - warning signs are required . The
closest sign should be about how many feet away on low - speed roads ? - ANSWERS-B. 200
2. Which of the following is the most important skill for a safety leader to have ? - ANSWERS-B.
Interpersonal skill to understand people and to motivate others
3. The XYZ Tree Company is well known for its production tree trimming . They treat their people well ,
training everyone from scratch on the job . Most of the climbers have been with the company a long
time . They had two recordable accidents but no lost - time accidents in the last two years . Because of
the type of pruning , they do and trees they work in , their climbers routinely run chain saws one -
handed , with no reported injuries . Is this a safe culture ? - ANSWERS-C. No , because the culture
accepts and even expects exposure so that it can maintain a certain level of production and a certain
image
4. Leaders can effectively improve their organization by applying which of the following characteristics
of leadership ? - ANSWERS-D. Create and sustain an environment where others can reach their full
potential
5. For a job hazard analysis to be as productive as possible while encouraging employee involvement , -
ANSWERS-B. Employees with exposure to the hazard should participate
6. Root cause analysis consists of identifying the following three causes - ANSWERS-C. Direct Indirect
Root
The Occupational Safety and Health Act of 1970 created both - ANSWERS-B. OSHA and NIOSH
8. Most accidents are rooted in - ANSWERS-B. Behavior
pf3
pf4
pf5
pf8
pf9

Partial preview of the text

Download CTSP Practice test UPDATED and more Exams Nursing in PDF only on Docsity!

CTSP PRACTICE TEST UPDATED WITH QUESTIONS

AND ANSWERS

  1. When your work obstructs any part of the roadway , advance - warning signs are required. The closest sign should be about how many feet away on low - speed roads? - ANSWERS-B. 200
  2. Which of the following is the most important skill for a safety leader to have? - ANSWERS-B. Interpersonal skill to understand people and to motivate others
  3. The XYZ Tree Company is well known for its production tree trimming. They treat their people well , training everyone from scratch on the job. Most of the climbers have been with the company a long time. They had two recordable accidents but no lost - time accidents in the last two years. Because of the type of pruning , they do and trees they work in , their climbers routinely run chain saws one - handed , with no reported injuries. Is this a safe culture? - ANSWERS-C. No , because the culture accepts and even expects exposure so that it can maintain a certain level of production and a certain image
  4. Leaders can effectively improve their organization by applying which of the following characteristics of leadership? - ANSWERS-D. Create and sustain an environment where others can reach their full potential
  5. For a job hazard analysis to be as productive as possible while encouraging employee involvement , - ANSWERS-B. Employees with exposure to the hazard should participate
  6. Root cause analysis consists of identifying the following three causes - ANSWERS-C. Direct Indirect Root The Occupational Safety and Health Act of 1970 created both - ANSWERS-B. OSHA and NIOSH
  7. Most accidents are rooted in - ANSWERS-B. Behavior
  1. What are the four categories of hazards in the workplace? - ANSWERS-A. Materials , equipment , environment , and people
  2. The main action recommended in worksite safety analysis is : - ANSWERS-D. Analysis of injury and illness trends over time so that patterns with common causes can be identified and prevented
  3. Root causes are the system weaknesses that produce the surface cause for the accident. Root causes include which of the following : - ANSWERS-C. Inadequacies in management procedures , standards , and controls
  4. When you arrive at a job site and inspect the property , the types of things you look for should include - ANSWERS-• A. Any condition that could create a potential hazard for you or your co-workers
  • B. Property such as landscaping and buildings that you need to protect
  • C. How to set up the work site for optimum efficiency
  • D. All the above—
  1. According to TCIA , which of the following is the leading cause of lost time due to injury in arboriculture? - ANSWERS-D. Struck - by's from falling branches
  2. When assessing site hazards , what is the significance of a tree with no root flare : ie , one that looks like a telephone pole? - ANSWERS-A. It indicates that fill has been added around the tree , possibly killing roots and weakening the tree structurally
  3. Which of the following is not specifically addressed by a job briefing? - ANSWERS-. D. How long the job is supposed to take
  4. Which of the following does this describe? " The communication of at least the following subjects for arboriculture operations : hazards associated with the job , work procedures involved , special precautions , electrical hazards , job arrangements and personal protective equipment. " - ANSWERS-A. Job briefing
  5. When controlling traffic , your goals are to - ANSWERS-A. Create a safe and efficient work site
  • B. Hinder traffic as little as possible
  1. Company A has 12 full - time employees. In the previous year , they worked an average of 1, hours each. Among them all , there were four recordable injuries , including two lost workday injuries and a total of five lost workdays. What is their incidence rate? - ANSWERS-C. 37.
  2. You want to set up a " zero - exposure " safety incentive plan , making it somewhat competitive between the crews you supervise. Which of the following would be the fairest and most accurate measure of hazard exposure to use for comparison? - ANSWERS-C. Accident Investigation reports
  3. If you wanted to setup a " less than zero " safety program , where would you focus your attention? - ANSWERS-B. Non - serious accidents and near misses ( close calls , simply because there is more of them and your efforts here can result in faster improvement. )
  4. Which of the following is NOT an acceptable practice for safe lifting? - ANSWERS-B. Keeping your head , shoulders and back bent forward , over the load as you lift
  5. What PPE is required by Z133 for operating a chain saw on the ground? - ANSWERS-A. Work boots , helmet , eye protection , leg protection , hearing protection
  6. What PPE is required for operating a chipper? - ANSWERS-C. Work boots , helmet , eye protection , hearing protection
  7. Struck - by hazards can be minimized by - ANSWERS-A. Setting up a work zone with proper cones, signs, and flags
  • B. Making sure the work zone is free of trip hazards
  • C. Staying out from under trees where limbs are being dropped D. Both A and C—
  1. If you are using a helmet with a face screen or shield , which of the following is correct? - ANSWERS- C. Separate eye protection is needed
  2. " ANSI Z133 : Workers engaged in arboricultural operations shall wear head protection that conforms to ANSI Z89.1 " " Face protection shall comply with ANSI Z87.1 " Respiratory protection shall comply with ANSI Z88.2 " " Eye protection in accordance with ANSI Z87.1 shall be worm when engaged

in arboricultural operations " From the ANSI Z133 statements above , which PPE is required to be worn for all tree - care related activities? - ANSWERS-D. Hardhats and eye protection

  1. According to ANSI Z133 , a " qualified arborist trainee " must be under the direct supervision of a qualified arborist. Which of the following is a correct application of this requirement? - ANSWERS-C. A qualified person must actually " Keep an eye on " the trainee while the trainee is training
  2. To make sure that employees are aware of the unique hazards associated with a specific job , which of the following is the most effective form of communication? - ANSWERS-C. Job briefing
  3. What is the key differences between a " qualified personnel " and a " qualified trainee "? - ANSWERS-A. The qualified person has a recognized degree or certification; the trainee does NOT
  • B. The qualified person has certain demonstratable skills or competencies, and the trainee is still undergoing training to build those skills
  • C. The qualified person can work independently, and the trainee must be supervised
  • D. Both B and C—
  1. While working in an insulated aerial lift , the qualified arborist shall maintain a minimum approach distance of from energized electrical conductors. The reason for this is , it is consistent with minimum separation distances found in ANSI 2133. - ANSWERS-C. 10 feet ( 3.05 meters ) ; The vehicle's insulating ability cannot be relied upon and cannot provide complete protection anyway ; Table 1
  2. According to ANSI Z133 , the person specifically responsible for the work shall only authorize the use of a crane for hoisting an arborist into position when they have determined that - ANSWERS-B. It is the safest most practical way to perform the work or gain access to the tree
  3. What is the OSHA standard protocol regarding personal protection equipment ( PPE )? - ANSWERS- A. Company performs a hazard assessment , company provides PPE to the employee , employee receives training in why and how PPE is used , company enforces PPE use and re - trains as needed
  4. Learning to run a chainsaw by watching a demonstration would be an example of what kind of learning? - ANSWERS-A. Visual ( seeing )
  5. Which of the following is NOT an essential element of emergency preparedness? - ANSWERS-C. Know how to climb
  1. Closed - ended questions most often begin with which one of these words? - ANSWERS-D. Does?
  2. Who should make a summary at the end of a lesson? - ANSWERS-A. The instructor
  3. During a demonstration , a trainer completes these steps in a specific order. Of the steps listed ( A , B , C , D ) which is the FIRST one that is NOT in the correct order? - ANSWERS-C. Make a summary of important steps in the task
  4. Negative demonstrations are not recommended for any type of safety classes , particularly when the learner's language isn't English , because : - ANSWERS-A. You want to create a positive learning environment
  5. The average trainer waits only 2-5 seconds for an answer to a question. To give learners time to prepare an answer to a question , do the following : - ANSWERS-B. Repeat or rephrase a question
  6. Which of the following is NOT a principle of adult learning? - ANSWERS-A. Adults learn best from their own experiences
  7. In a tailgate meeting , you are teaching your crew the correct use of a flag and hand signs when directing traffic around a work zone. You have just demonstrated the correct procedure and want to have crew members react to what they have seen in the demonstration. To accomplish this , it would be BEST for you to : - ANSWERS-B. Ask questions about what occurred during the demonstration
  8. Open - ended questions usually begin with which one of these words? - ANSWERS-C. What?
  9. Breaking a task down into its teachable parts can be difficult for instructors to do well because : - ANSWERS-A. They know the task so well they may leave out critical steps/skills
  • B. There are a number of acceptable methods for accomplishing the task
  • C. The task is complex and has a number of steps
  • D. All the above—
  1. Which question by a learner is an example of a " Kinesthetic - touching and doing " style of communicating? - ANSWERS-C. Can you walk me through it one more time?
  1. The first step in adult learning is to set up the learning activity. During this step it is appropriate for the instructor to : - ANSWERS-A. Explain the learning objective
  • B. Identify the benefit of the learning activity
  • C. Describe the learning activity
  • D. All the above—
  1. You have just taught your team how to start a cold chain saw by conducting a demonstration with discussion and practice. Which of the following questions would be the BEST to ask team members to help them figure out the safety concepts behind the demonstration? - ANSWERS-B. What did this demonstration teach you about safely starting a chainsaw?
  2. You are preparing to teach new employees about PPE - what to wear , how to wear it , and why. As you think about your employee profile , which of the following is NOT important? - ANSWERS-C. Whether or not the learners have their own PPE
  3. When creating a task analysis like " starting a chain saw " , which step ought to be done FIRST to be able to figure out how to teach a task in a standardized manner? - ANSWERS-A. Write down all the steps in the task
  4. You are breaking down the task of setting up a road side work zone into its teachable parts , to task analysis , so you can teach it to your crew. To be most useful , the task breakdown should list the steps and how difficult the steps are for which type of employee? - ANSWERS-B. Typical employee
  5. Learning objective. Given a selection of PPE , the employee will demonstrate its correct use , while operating a stump grinder , according to section 4.2 of the ANSI Standard. The words " __ according to section 4.2 of the ANSI Standard " are which characteristic of a learning objective? - ANSWERS-B. A behavioral specific verb
  6. Which part of the following learning objective is missing? " At the end of training , the green climber will be able to safely climb a tree according to ANSI Standard " - ANSWERS-C. A condition or circumstance