Lab Report: Superposition Theorem Verification in EEE141L/ETE141L, North South Univ., Lab Reports of Electrical Engineering

A lab report from the department of electrical & computer engineering at north south university, detailing the verification of the superposition theorem through experiments conducted in eee141l/ete141l. The report includes the list of equipment used, circuit diagrams, procedure for data collection, and tables for recording and calculating the values of various voltages and currents. The objective of the lab is to verify the superposition theorem by measuring the individual effects of each voltage source and then adding them up to obtain the total effect.

Typology: Lab Reports

2020/2021

Uploaded on 02/19/2021

bossbaby-gaming
bossbaby-gaming 🇧🇩

5 documents

1 / 2

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
NORTH SOUTH UNIVERSITY
DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING
EEE141L/ETE141L Updated By: Maria Moosa
Lab 5: Verification of Superposition Theorem.
Objective:
To verify Superposition Theorem.
List of Equipment
Trainer Board
DMM
1 x 3.3kΩ resistor
1 x 4.7kΩ resistor
1 x 1KΩ resistor
Circuit Diagram
Circuit 1 Circuit 2
Circuit 3
Procedure:
1. Set up Circuit 1.
2. With both the voltage source connected to the circuit, measure ,
,
,
 and record the values in
appropriate tables.
3. Setup Circuit 2. Measure and record ′, ′, ′ , ′.
4. Setup Circuit 3. Measure and record ′′, ′′, ′′ , .
pf2

Partial preview of the text

Download Lab Report: Superposition Theorem Verification in EEE141L/ETE141L, North South Univ. and more Lab Reports Electrical Engineering in PDF only on Docsity!

NORTH SOUTH UNIVERSITY

DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING

EEE 1 41L/ETE141L (^) Updated By: Maria Moosa

Lab 5 : Verification of Superposition Theorem.

Objective:

 To verify Superposition Theorem.

List of Equipment  Trainer Board  DMM

 1 x 3.3kΩ resistor  1 x 4.7kΩ resistor  1 x 1KΩ resistor

Circuit Diagram

Circuit 1 Circuit 2

Circuit 3

Procedure:

  1. Set up Circuit 1.
  2. With both the voltage source connected to the circuit, measure , , , and record the values in appropriate tables.
  3. Setup Circuit 2. Measure and record ′ (^) , ′ (^) , ′ (^) , ′ (^) .
  4. Setup Circuit 3. Measure and record ′′ (^) , ′′ (^) , ′′ (^) , ^ ′ (^) .

NORTH SOUTH UNIVERSITY

DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING

EEE41L/ETE141L Updated By: Maria Moosa

Data Collection for Exp 4:

Group No. ________ Instructor’s Signature __________

Table 1:

I 2 I’2^ I”2^ I’2 + I”

Table 2: VR1 V’R1 V’’R1 V’R1 + V’’R

Table 3: VR2 V’R2 V’’R2 V’R2 + V’’R

Table 4: VR3 V’R3 V’’R3 V’R3 + V’’R

Report:

  1. What is Superposition Theorem?
  2. Theoretically Calculate all values of Table 1 to Table 4. Show all the steps in details.
  3. Find the %Error between each value.
  4. Show that your circuit followed superposition theorem.