Electrical Safety and Code Requirements, Exams of Electrical and Electronics Engineering

A wide range of topics related to electrical safety and code requirements in the construction industry. It provides information on proper ladder setup, osha regulations, electrical equipment handling, blueprint interpretation, lighting calculations, and the use of various electrical tools and materials. The document also delves into specific code requirements for electrical installations, such as grounding, conduit support, cable types, and service entrance specifications. By studying this document, readers can gain a comprehensive understanding of the essential electrical safety practices and code compliance measures necessary for safe and effective electrical work in construction projects.

Typology: Exams

2024/2025

Available from 10/18/2024

Holygrams
Holygrams 🇺🇸

3.4

(5)

4.3K documents

1 / 6

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
the proper angle for setting up a ladder is to place the base at an ( the working length
of the ladder ) ✔✔quarter
The government organization whose purpose is to set and enforce work site safety and health
standards is ✔✔OSHA
In General, a beginning trades person with little or no experience in the electrical field is know as
✔✔An apprentice
All electrical equipment must be considered before working on it ✔✔energized
If the scale on a blueprint indicates 1/8 inch equals 1´ then a line that measures 10 inches would
indicate a site measurement ✔✔80 feet
if the lighting requirement is 3 volt amps per square foot and a home is 40 feet by 90 feet the
required volt-amps for lighting would be ✔✔LwA = the answer so 10,800 volt-amps
Nocti study for electrical latest update 2025/with certified questions
and answers graded A+
pf3
pf4
pf5

Partial preview of the text

Download Electrical Safety and Code Requirements and more Exams Electrical and Electronics Engineering in PDF only on Docsity!

the proper angle for setting up a ladder is to place the base at an ( the working length of the ladder ) ✔✔quarter The government organization whose purpose is to set and enforce work site safety and health standards is ✔✔OSHA In General, a beginning trades person with little or no experience in the electrical field is know as ✔✔An apprentice All electrical equipment must be considered before working on it ✔✔energized If the scale on a blueprint indicates 1/8 inch equals 1´ then a line that measures 10 inches would indicate a site measurement ✔✔80 feet if the lighting requirement is 3 volt amps per square foot and a home is 40 feet by 90 feet the required volt-amps for lighting would be ✔✔LwA = the answer so 10,800 volt-amps

Nocti study for electrical latest update 202 5/with certified questions

and answers graded A+

Which of the following hammers is most commonly used in electrical construction ✔✔claw what are industrial screwdriver blades made of ✔✔Tempered Steel All power tools should be grounded and must have a 3 prong cord unless they are approved ✔✔double insulated tools power tools should be carried by the ✔✔Handle when working on a construction site power tools should only be used if they are plugged into an ✔✔GFCI an ohmmeter is used to measure ✔✔resistance which of the following is used to measure current ✔✔Ammeter

Non-metallic sheathed cable must be supported ______ from every outlet or junction box ✔✔ 12 inches What kind of special screws are sued when attaching receptacles and switches to a box ✔✔captive Outlet boxes that are the sole support for paddle fans must be able to support fans that weigh up to ✔✔70 pounds In order to control a light from four locations, which of the following switches must be use? ✔✔two 3 - ways and two 4 - way Which of the following green technology utilizes wind to produce electricity ✔✔Wind Mill The NEC requires two grounding electrode rods to be driven into the ground a minimum of apart ✔✔ 6 feet What is the minimum distance between straps on service entrance conductors ✔✔ 30 inches

What is the minimum working space width required at the service panel? ✔✔ 30 inches A surface type meter base mounted in a wet location must be mounted so that there is an air space between the meter base and mounting surface. What is the minimum air space? ✔✔1/ Service conductors installed as open conductors should have a clearance of not less than from doors or windows designed to open? ✔✔36 inches A minimum clearance of must be maintained between overhead service conductors and residential properties, driveways, and commercial areas not subject to truck traffic ✔✔12 feet Fora one family dwelling the service disconnecting means should have a minimum rating of or greater ✔✔ 100 amps The NEC is based on ✔✔NFPA According the to NEC, continuous load is where the maximum current is expected current is expected to continue for or more ✔✔3 hours