Download Email Protocols | Web Development and more Lecture notes Web Design and Development in PDF only on Docsity!
E-mail Protocols
E-mail Protocols are set of rules that help the client to properly transmit the information to or from the mail server. Here in this tutorial, we will discuss various protocols such as SMTP, POP, and IMAP.
SMPTP
SMTP stands for Simple Mail Transfer Protocol. It was first proposed in 1982. It is a standard protocol used for sending e-mail efficiently and reliably over the internet.
Key Points:
SMTP is application level protocol.
SMTP is connection oriented protocol.
SMTP is text based protocol.
It handles exchange of messages between e-mail servers over TCP/IP network.
Apart from transferring e-mail, SMPT also provides notification regarding incoming mail.
When you send e-mail, your e-mail client sends it to your e-mail server which further contacts the recipient mail server using SMTP client.
These SMTP commands specify the sender’s and receiver’s e-mail address, along with the message to be send.
The exchange of commands between servers is carried out without intervention of any user.
In case, message cannot be delivered, an error report is sent to the sender which makes SMTP a reliable protocol.
SMTP Commands
The following table describes some of the SMTP commands:
S.N. Command Description
1
HELLO
This command initiates the SMTP conversation.
EHELLO
This is an alternative command to initiate the conversation. ESMTP indicates that the sender server wants to use extended SMTP protocol.
MAIL FROM
This indicates the sender’s address.
RCPT TO
It identifies the recipient of the mail. In order to deliver similar message to multiple users this command can be repeated multiple times.
5
SIZE
This command let the server know the size of attached message in bytes.
DATA
The DATA command signifies that a stream of data will follow. Here stream of data refers to the body of the message.
7
QUIT
This commands is used to terminate the SMTP connection.
VERFY
This command is used by the receiving server in order to verify whether the given username is valid or not.
EXPN
It is same as VRFY, except it will list all the users name when it used with a distribution list.
IMAP
IMAP stands for Internet Message Access Protocol. It was first proposed in 1986. There exist five versions of IMAP as follows:
- Original IMAP
- IMAP
- IMAP
- IMAP2bis
- IMAP
Key Points:
IMAP allows the client program to manipulate the e-mail message on the server without downloading them on the local computer.
The e-mail is hold and maintained by the remote server.
It enables us to take any action such as downloading, delete the mail without reading the mail.It enables us to create, manipulate and delete remote message folders called mail boxes.
IMAP enables the users to search the e-mails.
It allows concurrent access to multiple mailboxes on multiple mail servers.
POP commands are generally abbreviated into codes of three or four letters. Eg. STAT.
POP Commands
The following table describes some of the POP commands:
S.N. Command Description
1
LOGIN
This command opens the connection.
2
STAT
It is used to display number of messages currently in the mailbox.
3
LIST
It is used to get the summary of messages where each message summary is shown.
4
RETR
This command helps to select a mailbox to access the messages.
5
DELE
It is used to delete a message.
6
RSET
It is used to reset the session to its initial state.
7
QUIT
It is used to log off the session.
Comparison between POP and IMAP
S.N. POP IMAP
1 Generally used to support single client. Designed to handle multiple clients.
2 Messages are accessed offline. Messages are accessed online although it also supports offline mode. 3 POP does not allow search facility. It offers ability to search emails.
4 All the messages have to be downloaded. It allows selective transfer of messages to the client.
5
Only one mailbox can be created on the server.
Multiple mailboxes can be created on the server.
6 Not suitable for accessing non-mail data. Suitable for accessing non-mail data i.e. attachment.
7
POP commands are generally abbreviated into codes of three or four letters. Eg. STAT.
IMAP commands are not abbreviated, they are full. Eg. STATUS. 8 It requires minimum use of server resources. Clients are totally dependent on server.
9 Mails once downloaded cannot be accessed from some other location.
Allows mails to be accessed from multiple locations.
10
The e-mails are not downloaded automatically.
Users can view the headings and sender of e-mails and then decide to download. 10 POP requires less internet usage time. IMAP requires more internet usage time.
