Firefighter 2 Certification Exam Complete Solutions, Exams of Safety and Fire Engineering

Firefighter 2 Certification Exam Complete Solutions

Typology: Exams

2025/2026

Available from 11/06/2025

hesigrader002
hesigrader002 ๐Ÿ‡บ๐Ÿ‡ธ

4.1

(43)

7.7K documents

1 / 7

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
1
/
7
Firefighter 2 Certification Exam Complete Solutions
1.
Responsibilities
for
FF
2:
Prepare reports, communicate the need for assistance, coordinate an interior
attack
line
team,
extinguish
an
ignitable
liquid
fire,
control
a
flammable
gas
cylinder
fire,
protect
evidence
of
fire
cause and
origin,
access
and
disentangle
victims
from
motor
vehicle
accidents,
assist
special
rescue
team
operations,
perform a
fire
safety
survey,
present
fire
safety
information,
maintain
fire
equipment,
perform
annual
service
tests
on
fire
hoses
2.
Emergency
traffic:
An
urgent
message
that
takes
priority
over
all
other
communications
3.
Mayday:
Emergency traflc that is used for a firefighter that is downed, lost, missing or needs immediate
assistance.
4.
Evacuation
signal:
Warns all personnel to pull back to a safe location. Usually a sequence of 3 blasts on an
apparatus air horn.
5.
National Fire Incident Reporting System (NFIRS): Used to compile and analyze incident
reports at the local, state, and national levels.
6.
NIMS
Guide
0001:
National resource typing criteria. NIMS document that lists the proper terminology for
the
common resources used at large-scale emergencies.
7.
Strategy:
The "big picture" plan of what has to be done.
8.
Tactics:
The
steps
that
are
taken
to
achieve
the
strategic
objectives.
9.
Tasks:
The
specific
assignments
that
will
get
the
job
done.
pf3
pf4
pf5

Partial preview of the text

Download Firefighter 2 Certification Exam Complete Solutions and more Exams Safety and Fire Engineering in PDF only on Docsity!

1 / Firefighter 2 Certification Exam Complete Solutions

  1. Responsibilities for FF 2: Prepare reports, communicate the need for assistance, coordinate an interior attack line team, extinguish an ignitable liquid fire, control a flammable gas cylinder fire, protect evidence of fire cause and origin, access and disentangle victims from motor vehicle accidents, assist special rescue team operations, perform a fire safety survey, present fire safety information, maintain fire equipment, perform annual service tests on fire hoses
  2. Emergency traffic: An urgent message that takes priority over all other communications
  3. Mayday: Emergency traflc that is used for a firefighter that is downed, lost, missing or needs immediate assistance.
  4. Evacuation signal: Warns all personnel to pull back to a safe location. Usually a sequence of 3 blasts on an apparatus air horn.
  5. National Fire Incident Reporting System (NFIRS): Used to compile and analyze incident reports at the local, state, and national levels.
  6. NIMS Guide 0001: National resource typing criteria. NIMS document that lists the proper terminology for the common resources used at large-scale emergencies.
  7. Strategy: The "big picture" plan of what has to be done.
  8. Tactics: The steps that are taken to achieve the strategic objectives.
  9. Tasks: The specific assignments that will get the job done.

2 /

  1. Search and rescue tools: Pushing tool (short like pole), prying tool (halligan tool), striking tool (sledgehammer or flat-head axe), cutting tool (axe), portable hand light, thermal imaging devices, life lines.
  2. Tool staging: Placing a tarp or salvage cover on the ground at a designated location and laying out commonly used tools and equipment.
  3. Carabiner: Used to connect one rope to another rope or to other hardware such as an anchor plate, swivel, or pulley. NFPA 1983
  4. Harness: A piece of rescue or safety equipment made of webbing and worn by a person.
  5. Class 2 harness: Seat harness. Fastens around the rescuers waist and legs and has a design load of 600 lbs.
  6. Class 3 harness: Full body harness. Fastens around the rescuers waist and thighs as well as secures the rescuers waist and shoulders.
  7. Trench rescue: Rescue in collapsed trenches.
  8. Confined space rescue: Rescue in tanks, silos, underground electrical vaults storm drains and other similar structures.
  9. Water rescue: Throwing a rope to a person in the water and pulling them to shore, a rope stretched across a stream or river, a boat going to get a victim.
  10. Venting for life safety: Venting to clear smoke, heat, and toxic gasses from the structure to give occupants a better chance to survive.
  11. Venting for fire containment: Releasing smoke and superheated gases to the exterior to prevent the

4 /

  1. Compressed air foam (CAF): Produced by injecting compressed air into a stream of water that has been mixed with 0.1 percent to 1 percent foam.
  2. Protein foam: Made from animal by-products. They are ettective on Class B hydrocarbon fires and are applied in 3 percent or 6 percent delivery rates.
  3. Fluoroprotein foam: Made from the same base materials as protein foam but include additional fluoro- chemical surfactant additives.
  4. Film-forming fluoroprotein (FFFP): Composed of protein plus film-forming fluorinated surface-ac- tive agents, which make them capable of forming water solution films on the surface of most flammable hydrocarbons and of conferring a fuel-shedding property of the foam generated.
  5. Aqueous film-forming foam (AFFF): A synthetic based foam that is particularly suitable for spill related fires involving gasoline and light hydrocarbon fuels.
  6. Alcohol-resistant foam: Formulated so that alcohols and other polar solvents do not dissolve the foam.
  7. Foam proportioner: The device that mixes the foam concentrate into the fire stream in the proper percentage.
  8. Foam eductor: Draws foam concentrate from a container or storage tank into a moving stream of water.
  9. Foam injectors: Add the foam concentrate to the water stream under pressure.
  10. Batch mixing: When foam concentrate is poured directly into an apparatus booster tank to produce foam solution.

5 /

  1. Premixed foam: Foam fire extinguishers are filled with premixed foam solution and pressurized with compressed air or nitrogen.
  2. Aerating nozzle: Nozzle that is designed to introduce more air into the stream and produce a consistent bubble structure.
  3. Roll on method (Sweep): Firefighter sweeps the stream along the ground just in front of the target to produce a quantity of foam and then uses the energy of the stream to push the foam blanket across the surface.
  4. Bankshot method: The use of an object to deflect the foam stream and let it flow down onto the burning surface.
  5. Rain down method: Lofting the foam stream into the air above the fire and letting it fall down gently on the surface.
  6. Generator: Supply of electricity to a scene that needs it.
  7. Ventalation: Must be coordinated with fire suppression ettorts to ensure that both events occur simultane- ously and in a manner that supports the attack plan.
  8. Posts: Vertical support members of a vehicle that hold up the roof and form the upright columns of the passenger compartment.
  9. A post: Located closest to the front of the vehicle. They form sides of the windshield.
  10. B post: Located between the front and rear doors of a vehicle.
  11. C post: Located behind the rear doors.

7 /

  1. Circumstantial evidence: Is information that can be used to prove a theory; based on facts that were observed directly.
  2. Arsonist: A person that deliberately sets a fire with criminal intent.
  3. Pyromaniac: A pathological fire setter.
  4. Serial arsons: Involves an ottender who sets 3 or more fires, with a cooling ott period before fires.
  5. Spree arsons: Involves an arsonist who sets 3 or more fire at separate locations, with no emotional cooling ott between fires.
  6. Mass arsons: Involves an ottender who sets 3 or more fires at the same site or location during a limited period of time.
  7. Six motives for arson: Vandalism, excitement, revenge, crime concealment, profit, extremism.