Firefighter 2 Final Exam, Exams of Safety and Fire Engineering

A practice exam or study guide for firefighters preparing for the firefighter 2 certification exam. It covers a wide range of topics related to firefighting equipment, tactics, and procedures, including questions on pneumatic tools, foam proportioning, fire hose testing, sprinkler systems, fire alarm systems, and more. Detailed information and explanations for various firefighting concepts and techniques, making it a valuable resource for firefighters looking to expand their knowledge and skills. The comprehensive nature of the content, along with the inclusion of practice questions, suggests this document could be useful for firefighters studying for the firefighter 2 exam, as well as for those seeking to improve their overall understanding of firefighting principles and best practices.

Typology: Exams

2024/2025

Available from 10/12/2024

CarlyBlair
CarlyBlair 🇺🇸

4

(1)

4.6K documents

1 / 11

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Firefighter 2 Final Exam
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened
locks and steel? -
Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? -
Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? -
Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a
residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? -
are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? -
Flow pressure
Proportioning methods: When would batch mixing not be effective? -
On large incidents because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. -
Reduce flame spread
1 | P a g e
pf3
pf4
pf5
pf8
pf9
pfa

Partial preview of the text

Download Firefighter 2 Final Exam and more Exams Safety and Fire Engineering in PDF only on Docsity!

Firefighter 2 Final Exam

Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks and steel? - Whizzer saws Which proportioning method uses an external pump or head pressure to force foam concentrate into the fire stream at the correct ratio for the water flow? - Premixing method What is the term used to describe forward velocity pressure at a discharge opening while water is flowing? - Flow pressure Which of the following is NOT a question that would be asked concerning appliances during a residential fire safety survey? Are surge protectors being used? Are appliances name brand? Are electrical cords in good condition? Are the units operating properly? - are appliances name brand? Which type of pressure can be measured with a pitot tube and gauge? - Flow pressure Proportioning methods: When would batch mixing not be effective? - On large incidents because attack lines must be shut down when refilling an empty tank. Water applied to ordinary combustibles usually _______. - Reduce flame spread

Which type of valves are used to control the flow from the hydrant? - Gate valves The _____ the wood, the easier to ignite and the faster it loses structural integrity. - Smaller The threads on pump male discharge outlets are protected by fittings called _____ _____. - Hose caps Who should begin stabilization of a patient trapped inside a vehicle? - A rescuer with EMT training Name one element of patient removal: - Covering sharp edges Fixed-temperature heat detectors rated at _____(f)(c) are common for living spaces. - 165 | 76 Cribbing is most commonly used to _________. - stabilize objects Which type of test should be preformed by private contractors or fire department personnel? - Standard testing Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid- mounted twin-agent units, and vehicle mounted tank systems? - Premixing method One of the most important practices to address to building occupants about fire safety is _______. - making sure to maintain clear and unobstructed exit pathways

Which pneumatic tool can be used to vacuum loose soil from around victims buried in a trench collapse? - air vacuum Which method of moving water uses a primary water source located at a higher elevation than the distribution system and delivers water to the system without the use of pumps? - gravity system What is NOT a reason a hose clamp is used? - to allow advancement of a charged hose line down stairs Where should the hose be connected on a fire dept pumper when being used for service testing hose line? - to the discharges on the opposite side of the pump panel What is the time span when presenting to young children? - 15 minutes The distribution system that provides circulating feed from all directions is called the _______. - grid system Which sprinkler systems are designed to quickly supply a large volume of water to the protected area? - Deluge system 3 question to ask yourself during a vehicle incident size up. -

  1. are any utilities damaged?
  2. Is there a need for additional resources?
  3. Is there a fire / potential for a fire? *Ages of the victims do not apply Fog nozzles break down ____________ into tiny droplets. -

foam solutions What NFPA standard addresses fire inspection? - NFPA 1031 What is the first step in the basic four-step method of instruction? - preparation Fixed-temp heat detectors are installed on the ______ of a room. - ceiling When service testing fire hose, keep the hose testing area as _____ as possible when filling and discharging air from the hose. - dry The required air pressure in a dry-pipe system is usually about _____ psi (kPa) above the trip pressure - 20 (140) Which pattern has limited capability for cooling hot gases? - solid stream Which automatic alarm systems are used to protect large commercial and industrial buildings - proprietary systems What is a main type of liquified petroleum gas (LPG)? - propane Supervising fire alarm systems are designed to be supervised by: - The systems themselves Air-aspirating foam nozzles provide what? -

gate valves The threads on a pump male discharge outlets are protected by fittings called ________. - hose caps who should begin stabilization of a patient trapped inside a vehicle? - a rescuer with licensed EMS training Which of the following is an element of patient removal? - covering sharp edges Fixed-temp heat detectors rated at ________(*F) are common for living spaces - 165 Firefighters should remove charred materials to prevent the possibility of rekindle and: - to help reduce smoke damage Proportioning refers to: - the mixing of water with foam concentrate to form a solution Name one thing not included in a incident report: - length of rehab Which type of smoke detectors detect minute particles and aerosols produced during combustion? - ionization smoke detectors What information in fire incident records can help with fire prevention efforts? - information about the fire history of a community How many types of portable foam proportioners are there and what are they called? -

in-line and foam nozzle eductors _____________ are made by fire service personnel to ensure compliance with applicable fire and life-safety requirements. - inspections Most incendiary devices leave _____ of their existence. - evidence many fixed fire suppression systems depend on a signal from - a manual pull box The technique of approaching and controlling leaks or fires involving vehicles..... - are the same as for storage vessels The service test should include a specially designed hose test gate valve that has a _____in (mm) hole in the gate. - 1/4 (6) In most jurisdictions, single family residences: - are not subject to any codes. Water mains are made up of all of the following except: - copper Which of the following is a way that human footprints and tire marks can be protected? - cardboard boxes placed over the prints Protect completely or partially burned papers found in a furnace, stove, or fireplace by: - immediately closing dampers and other openings which agency outlines the necessary information needed to complete incident reports? -

On some foam proportioners, the pressure of the water stream flowing through a restriction will create a __________ that inducts foam concentrate into the water stream. - venturi action What is an example of a groundwater supply? - water wells Chains used for rescue work should be made from: - alloy steel Which type of valve devices are most often used in wild land firefighting operations? - water thief appliences How should vertical motion of a vehicle involved in an incident be prevented? - with jacks or cribbing Which sprinkler position extends down from the underside of the piping? - upright postion Test lengths of hose shouldn't exceed _______ft (m) in length. - 300 feet of 100 meters Which automatic alarm systems have a receiving station at an off-site, contracted service point? - central station systems When applying a hose clamp, apply it within _____ft from the coupling on the incoming water side. - 5 feet (1.5) When should a fire hose be service tested? - after being run over by a vehicle

True of False: Diluted foam concentrates are highly dangerous and pose extreme health risks to firefighters - false Which type of glass is designed so that small lines of fracture are spread throughout the entire plate, so that the glass separates into many small pieces? - Tempered Glass Which of the following is a guideline for conducting residential fire safety surveys? - survey all rooms including the garage What should firefighters never do regarding the cause of the fire? - express personal opinions to anyone Wood reacts to fire conditions based on its: - size and moisture content Which type of valve devices are used when large-diameter hose (LDH) is not available to overcome friction loss in exceptionally long hose lays? - Siamese appliances List an example of a factor in hose line selection: - fire load