DirectFlash Shelves - ANSWER Storage units starting numbering at 9,
decreasing.
//X Chassis - ANSWER 3 RU chassis supporting SAS or NVME connections.
//XL Chassis - ANSWER 5 RU chassis with enhanced capabilities.
Power Requirements - ANSWER X10, X20, X50 use 110 Volt; others require 200+
Volt.
NVRAM Configuration - ANSWER X10, X20, X50 have 2; X70, X90 have 4.
Ethernet Ports - ANSWER //M has 2; //X has 4 onboard ports.
Shelf Cable Lengths - ANSWER Available in 1, 3, or 5 meters.
FC Card Mobility - ANSWER FC cards move from XR2 to XR3 only.
Direct Memory Slots - ANSWER Slots 0-7 in //X; any slots in //XL.
Puresetup Command - ANSWER Sets the timezone for the system.
Puredrive List Command - ANSWER Displays drive status and health information.
Conversion Kits - ANSWER Four drive expansions referred to as Conversion Kits.
Hardwarecheck.py - ANSWER Script to check overall hardware health.
Torx Driver - ANSWER Locks drives and NVRAM securely in place.
Storageview.py Config - ANSWER Checks the cabling of storage shelves.
Installation Work Book - ANSWER Filled out by customer prior to installation.
Purearray Phonehome - ANSWER Sends logs for system diagnostics.
Baud Rate - ANSWER 115,200 used for serial connections.
Puredb Run Giveback - ANSWER Changes primary controller type safely.
Proxy Configuration - ANSWER Format: http(s)://hostname:port with credentials.
