








































































Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
A collection of questions and answers related to the extra class license for amateur radio operators. It covers various topics, including rf safety, emissions, and regulations. Useful for individuals preparing for the extra class exam.
Typology: Exams
1 / 80
This page cannot be seen from the preview
Don't miss anything!









































































E0A01 What, if any, are the differences between the radiation produced by radioactive materials and the electromagnetic energy radiated by an antenna? A. There is no significant difference between the two types of radiation B. Only radiation produced by radioactivity can injure human beings C. RF radiation does not have sufficient energy to break apart atoms and molecules; radiation from radioactive sources does D. Radiation from an antenna will damage unexposed photographic film, ordinary radioactive materials do not cause this problem - Answers- (C) E0A02 When evaluating exposure levels from your station at a neighbor's home, what must you do? A. Make sure signals from your station are less than the controlled MPE limits B. Make sure signals from your station are less than the uncontrolled MPE limits C. Nothing; you need only evaluate exposure levels on your own property D. Advise your neighbors of the results of your tests - Answers- (B) E0A03 Which of the following would be a practical way to estimate whether the RF fields produced by an amateur radio station are within permissible MPE limits? A. Use a calibrated antenna analyzer B. Use a hand calculator plus Smith-chart equations to calculate the fields C. Walk around under the antennas with a neon-lamp probe to find the strongest fields D. Use a computer-based antenna modeling program to calculate field strength at accessible locations - Answers- (D) E0A04 When evaluating a site with multiple transmitters operating at the same time, the operators and licensees of which transmitters are responsible for mitigating over- exposure situations? A. Only the most powerful transmitter B. Only commercial transmitters C. Each transmitter that produces 5% or more of its maximum permissible exposure limit at accessible locations D. Each transmitter operating with a duty-cycle greater than 50% - Answers- (C) E0A05 What is one of the potential hazards of using microwaves in the amateur radio bands? A. Microwaves are ionizing radiation B. The high gain antennas commonly used can result in high exposure levels C. Microwaves often travel long distances by ionospheric reflection D. The extremely high frequency energy can damage the joints of antenna structures - Answers- (B) E0A06 Why are there separate electric (E) and magnetic (H) field MPE limits? A. The body reacts to electromagnetic radiation from both the E and H fields B. Ground reflections and scattering make the field impedance vary with location C. E field and H field radiation intensity peaks can occur at different locations D. All of these answers are correct - Answers- (D) E0A07 What is the "far-field" zone of an antenna? A. The area of the ionosphere where radiated power is not refracted B. The area where radiated power dissipates over a specified time period C. The area where radiated field strengths are obstructed by
objects of reflection D. The area where the shape of the antenna pattern is independent of distance - Answers- (D) E0A08 What does SAR measure? A. Synthetic Aperture Ratio of the human body B. Signal Amplification Rating C. The rate at which RF energy is absorbed by the body D. The rate of RF energy reflected from stationary terrain - Answers- (C) E0A09 Which insulating material commonly used as a thermal conductor for some types of electronic devices is extremely toxic if broken or crushed and the particles are accidentally inhaled? A. Mica B. Zinc oxide C. Beryllium Oxide D. Uranium Hexaflouride
Its operator must have an FCC Marine or Aircraft endorsement on his or her amateur license - Answers- (A) E1A13 When a US-registered vessel is in international waters, what type of FCC-issued license or permit is required to transmit amateur communications from an on-board amateur transmitter? A. Any amateur license with an FCC Marine or Aircraft endorsement B. Any amateur license or reciprocal permit for alien amateur licensee C. Only General class or higher amateur licenses D. An unrestricted Radiotelephone Operator Permit - Answers- (B) E1B01 Which of the following constitutes a spurious emission? A. An amateur station transmission made at random without the proper call sign identification B. A signal transmitted in a way that prevents its detection by any station other than the intended recipient C. Any transmitted bogus signal that interferes with another licensed radio station D. An emission outside its necessary bandwidth that can be reduced or eliminated without affecting the information transmitted - Answers- (D) E1B02 Which of the following factors might cause the physical location of an amateur station apparatus or antenna structure to be restricted? A. The location is in or near an area of political conflict, military maneuvers or major construction B. The location's geographical or horticultural importance C. The location is in an ITU zone designated for coordination with one or more foreign governments D. The location is significant to our environment, American history, architecture, or culture. - Answers- (D) E1B03 Within what distance must an amateur station protect an FCC monitoring facility from harmful interference? A. 1 mile B. 3 miles C. 10 miles D. 30 miles - Answers- (A) E1B04 What must be done before placing an amateur station within an officially designated wilderness area or wildlife preserve, or an area listed in the National Register of Historical Places? A. A proposal must be submitted to the National Park Service B. A letter of intent must be filed with the National Audubon Society C. An Environmental Assessment must be submitted to the FCC D. A form FSD-15 must be submitted to the Department of the Interior - Answers- (C) E1B05 What height restrictions apply to an amateur station antenna structure not close to a public use airport unless the FAA is notified and it is registered with the FCC? A. It must not extend more than 300 feet above average height of terrain surrounding the site B. It must be no higher than 200 feet above ground level at its site C. There are no height restrictions because the structure obviously would not be a hazard to aircraft in flight D. It must not extend more than 100 feet above sea level or the rim of the nearest valley or canyon - Answers- (B) E1B06 Which of the following additional rules apply if you are installing an amateur station antenna at a site within 20,000 feet of a public use airport? A. You may have to notify the Federal Aviation Administration and register it with the FCC B. No special rules apply if your antenna structure will be less than 300 feet in height C. You must file
an Environmental Impact Statement with the EPA before construction begins D. You must obtain a construction permit from the airport zoning authority - Answers- (A) E1B07 Whose approval is required before erecting an amateur station antenna located at or near a public use airport if the antenna would exceed a certain height depending upon the antenna's distance from the nearest active runway? A. The FAA must be notified and it must be registered with the FCC B. Approval must be obtained from the airport manager C. Approval must be obtained from the local zoning authorities D. The FAA must approve any antenna structure that is higher than 20 feet - Answers- (A) E1B08 On what frequencies may the operation of an amateur station be restricted if its emissions cause interference to the reception of a domestic broadcast station on a receiver of good engineering design? A. On the frequency used by the domestic broadcast station B. On all frequencies below 30 MHz C. On all frequencies above 30 MHz D. On the interfering amateur service transmitting frequencies - Answers- (D) E1B09 What is the Radio Amateur Civil Emergency Service (RACES)? A. A radio service using amateur service frequencies on a regular basis for communications that can reasonably be furnished through other radio services B. A radio service of amateur stations for civil defense communications during periods of local, regional, or national civil emergencies C. A radio service using amateur service frequencies for broadcasting to the public during periods of local, regional or national civil emergencies D. A radio service using local government frequencies by Amateur Radio operators for civil emergency communications - Answers- (B) E1B10 Which amateur stations may be operated in RACES? A. Only those club stations licensed to Amateur Extra class operators B. Any FCC-licensed amateur station except a Technician class operator's station C. Any FCC-licensed amateur station certified by the responsible civil defense organization for the area served D. Any FCC-licensed amateur station participating in the Military Affiliate Radio System (MARS) - Answers- (C) E1B11 What frequencies are normally authorized to an amateur station participating in RACES? A. All amateur service frequencies otherwise authorized to the control operator B. Specific segments in the amateur service MF, HF, VHF and UHF bands C. Specific local government channels D. Military Affiliate Radio System (MARS) channels - Answers- (A) E1B12 What are the frequencies authorized to an amateur station participating in RACES during a period when the President's War Emergency Powers are in force? A. All frequencies in the amateur service authorized to the control operator B. Specific amateur service frequency segments authorized in FCC Part 214 C. Specific local government channels D. Military Affiliate Radio System (MARS) channels - Answers- (B)
E1C08 What is the maximum permissible duration of a remotely controlled station's transmissions if its control link malfunctions? A. 30 seconds B. 3 minutes C. 5 minutes D. 10 minutes - Answers- (B) E1C09 Which of these frequencies are available for automatically controlled ground- station repeater operation? A. 18.110 - 18.168 MHz B. 24.940 - 24.990 MHz C. 10.100 - 10.150 MHz D. 29.500 - 29.700 MHz - Answers- (D) E1C10 What types of amateur stations may automatically retransmit the radio signals of other amateur stations? A. Only beacon, repeater or space stations B. Only auxiliary, repeater or space stations C. Only earth stations, repeater stations or model crafts D. Only auxiliary, beacon or space stations - Answers- (B) E1D01 What is the definition of the term telemetry? A. One-way transmission of measurements at a distance from the measuring instrument B. A two-way interactive transmission C. A two-way single channel transmission of data D. One-way transmission that initiates, modifies, or terminates the functions of a device at a distance
E1D06 Which of the following special provisions must a space station incorporate in order to comply with space station requirements? A. The space station must be capable of effecting a cessation of transmissions by telecommand when so ordered by the FCC B. The space station must cease all transmissions after 5 years C. The space station must be capable of changing its orbit whenever such a change is ordered by NASA D. The station call sign must appear on all sides of the spacecraft - Answers- (A) E1D07 Which amateur service HF bands have frequencies authorized to space stations? A. Only 40m, 20m, 17m, 15m, 12m and 10m B. Only 40m, 20m, 17m, 15m and 10m bands C. 40m, 30m, 20m, 15m, 12m and 10m bands D. All HF bands - Answers- (A) E1D08 Which VHF amateur service bands have frequencies available for space stations? A. 6 meters and 2 meters B. 6 meters, 2 meters, and 1.25 meters C. 2 meters and 1.25 meters D. 2 meters - Answers- (D) E1D09 Which amateur service UHF bands have frequencies available for a space station? A. 70 cm B. 70 cm, 23 cm, 13 cm C. 70 cm and 33 cm D. 33 cm and 13 cm - Answers- (B) E1D10 Which amateur stations are eligible to be telecommand stations? A. Any amateur station designated by NASA B. Any amateur station so designated by the space station licensee C. Any amateur station so designated by the ITU D. All of these choices are correct - Answers- (B) E1D11 Which amateur stations are eligible to operate as Earth stations? A. Any amateur station whose licensee has filed a pre-space notification with the FCC's International Bureau B. Only those of General, Advanced or Amateur Extra Class operators C. Only those of Amateur Extra Class operators D. Any amateur station, subject to the privileges of the class of operator license held by the control operator - Answers- (D) E1D12 Who must be notified before launching an amateur space station? A. The National Aeronautics and Space Administration, Houston, TX B. The FCC's International Bureau, Washington, DC C. The Amateur Satellite Corp., Washington, DC D. All of these answers are correct - Answers- (B) E1E01 What is the minimum number of qualified VEs required to administer an Element 4 amateur operator license examination? A. 5 B. 2 C. 4 D. 3 - Answers- (D) E1E02 Where are the questions for all written US amateur license examinations listed? A. In FCC Part 97 B. In an FCC-maintained question pool C. In the VEC-maintained question pool D. In the appropriate FCC Report and Order - Answers- (C) E1E03 Who is responsible for maintaining the question pools from which all amateur license examination questions must be taken? A. All of the VECs B. The VE team C.
E1E10 Who is responsible for the proper conduct and necessary supervision during an amateur operator license examination session? A. The VEC coordinating the session B. The FCC C. Each administering VE D. The VE session manager - Answers- (C) E1E11 What should a VE do if a candidate fails to comply with the examiner's instructions during an amateur operator license examination? A. Warn the candidate that continued failure to comply will result in termination of the examination B. Immediately terminate the candidate's examination C. Allow the candidate to complete the examination, but invalidate the results D. Immediately terminate everyone's examination and close the session - Answers- (B) E1E12 To which of the following examinees may a VE not administer an examination? A. Employees of the VE B. Friends of the VE C. The VE's close relatives as listed in the FCC rules D. All these answers are correct - Answers- (C) E1E13 What may be the penalty for a VE who fraudulently administers or certifies an examination? A. Revocation of the VE's amateur station license grant and the suspension of the VE's amateur operator license grant B. A fine of up to $1000 per occurrence C. A sentence of up to one year in prison D. All of these choices are correct
E1E18 For which types of out-of-pocket expenses may VEs and VECs be reimbursed? A. Preparing, processing, administering and coordinating an examination for an amateur radio license B. Teaching an amateur operator license examination preparation course C. No expenses are authorized for reimbursement D. Providing amateur operator license examination preparation training materials - Answers- (A) E1E19 How much reimbursement may the VE team and VEC accept for preparing, processing, administering and coordinating an examination? A. Actual out-of-pocket expenses B. The national minimum hourly wage for time spent providing examination services C. Up to the maximum fee per examinee announced by the FCC annually D. As much as the examinee is willing to donate - Answers- (A) E1E20 What is the minimum age to be a volunteer examiner? A. 13 years old B. 16 years old C. 18 years old D. 21 years old - Answers- (C) E1F01 On what frequencies are spread spectrum transmissions permitted? A. Only on amateur frequencies above 50 MHz B. Only on amateur frequencies above 222 MHz C. Only on amateur frequencies above 420 MHz D. Only on amateur frequencies above 144 MHz - Answers- (B) E1F02 Which of the following operating arrangements allows an FCC-licensed US citizen to operate in many European countries, and alien amateurs from many European countries to operate in the US? A. CEPT agreement B. IARP agreement C. ITU reciprocal license D. All of these choices are correct - Answers- (A) E1F03 Which of the following operating arrangements allow an FCC-licensed US citizen and many Central and South American amateur operators to operate in each other's countries? A. CEPT agreement B. IARP agreement C. ITU agreement D. All of these choices are correct - Answers- (B) E1F04 What does it mean if an external RF amplifier is listed on the FCC database as certificated for use in the amateur service? A. The RF amplifier may be marketed for use in any radio service B. That particular RF amplifier may be marketed for use in the amateur service C. All similar RF amplifiers produced by other manufacturers may be marketed D. All RF amplifiers produced by that manufacturer may be marketed - Answers- (B) E1F05 Under what circumstances may a dealer sell an external RF power amplifier capable of operation below 144 MHz if it has not been granted FCC certification? A. It was purchased in used condition from an amateur operator and is sold to another amateur operator for use at that operator's station B. The equipment dealer assembled it from a kit C. It was imported from a manufacturer in a country that does not require certification of RF power amplifiers D. It was imported from a manufacturer in another country, and it was certificated by that country's government - Answers- (A)
networks C. It must exhibit a gain of 0 dB or less over its full output range D. It must satisfy the FCC's spurious emission standards when operated at its full output power - Answers- (D) E1F15 Who may be the control operator of an auxiliary station? A. Any licensed amateur operator B. Only Technician, General, Advanced or Amateur Extra Class operators C. Only General, Advanced or Amateur Extra Class operators D. Only Amateur Extra Class operators - Answers- (B) E1F16 What types of communications may be transmitted to amateur stations in foreign countries? A. Business-related messages B. Automatic retransmissions of any amateur communications C. Communications incidental to the purpose of the amateur service and remarks of a personal nature D. All of these choices are correct - Answers- (C) E1F17 Under what circumstances might the FCC issue a "Special Temporary Authority" (STA) to an amateur station? A. To provide for experimental amateur communications B. To allow regular operation on Land Mobile channels C. To provide additional spectrum for personal use D. To provide temporary operation while awaiting normal licensing - Answers- (A) E2A01 What is the direction of an ascending pass for an amateur satellite? A. From west to east B. From east to west C. From south to north D. From north to south - Answers- (C) E2A02 What is the direction of a descending pass for an amateur satellite? A. From north to south B. From west to east C. From east to west D. From south to north - Answers- (A) E2A03 What is the orbital period of a satellite? A. The point of maximum height of a satellite's orbit B. The point of minimum height of a satellite's orbit C. The time it takes for a satellite to complete one revolution around the Earth D. The time it takes for a satellite to travel from perigee to apogee - Answers- (C) E2A04 What is meant by the term "mode" as applied to an amateur radio satellite? A. The type of signals that can be relayed through the satellite B. The satellite's uplink and downlink frequency bands C. The satellite's orientation with respect to the Earth D. Whether the satellite is in a polar or equatorial orbit - Answers- (B) E2A05 What do the letters in a satellite's mode designator specify? A. Power limits for uplink and downlink transmissions B. The location of the ground control station C. The polarization of uplink and downlink signals D. The uplink and downlink frequencies - Answers- (D) E2A06 On what band would a satellite receive signals if it were operating in A. 432 MHz B. 144 MHz C. 50 MHz D. 28 MHz - Answers- (A)
E2A07 Which of the following types of signals can be relayed through a linear transponder? A. FM and CW B. SSB and SSTV C. PSK and Packet D. All these answers are correct - Answers- (D) E2A08 What is the primary reason for satellite users to limit their transmit ERP? A. For RF exposure safety B. Because the satellite transmitter output power is limited C. To avoid limiting the signal of the other users D. To avoid interfering with terrestrial QSOs - Answers- (B) E2A09 What do the terms L band and S band specify with regard to satellite communications? A. The 23 centimeter and 13 centimeter bands B. The 2 meter and 70 centimeter bands C. FM and Digital Store-and-Forward systems D. Which sideband to use - Answers- (A) E2A10 Why may the received signal from an amateur satellite exhibit a rapidly repeating fading effect? A. Because the satellite is rotating B. Because of ionospheric absorption C. Because of the satellite's low orbital altitude D. Because of the Doppler effect - Answers- (A) E2A11 What type of antenna can be used to minimize the effects of spin modulation and Faraday rotation? A. A linearly polarized antenna B. A circularly polarized antenna C. An isotropic antenna D. A log-periodic dipole array - Answers- (B) E2A12 What is one way to predict the location of a satellite at a given time? A. By means of the Doppler data for the specified satellite B. By subtracting the mean anomaly from the orbital inclination C. By adding the mean anomaly to the orbital inclination D. By calculations using the Keplerian elements for the specified satellite - Answers- (D) E2A13 What type of satellite appears to stay in one position in the sky? A. HEO B. Geosynchronous C. Geomagnetic D. LEO - Answers- (B) E2A14 What happens to a satellite's transmitted signal due to the Doppler Effect? A. The signal strength is reduced as the satellite passes overhead B. The signal frequency shifts lower as the satellite passes overhead C. The signal frequency shifts higher as the satellite passes overhead D. The polarization of the signal continually rotates - Answers- (B) E2B01 How many times per second is a new frame transmitted in a fast-scan (NTSC) television system? A. 30 B. 60 C. 90 D. 120 - Answers- (A) E2B02 How many horizontal lines make up a fast-scan (NTSC) television frame? A. 30 B. 60 C. 525 D. 1080 - Answers- (C) E2B03 How is an interlace scanning pattern generated in a fast-scan (NTSC) television system? A. By scanning two fields simultaneously B. By scanning each field from
E2B13 How many lines are commonly used in each frame on an amateur slow-scan color television picture? A. 30 to 60 B. 60 or 100 C. 128 or 256 D. 180 or 360 - Answers- (C) E2B14 What aspect of an amateur slow-scan television signal encodes the brightness of the picture? A. Tone frequency B. Tone amplitude C. Sync amplitude D. Sync frequency - Answers- (A) E2B15 What signals SSTV receiving equipment to begin a new picture line? A. Specific tone frequencies B. Elapsed time C. Specific tone amplitudes D. A two-tone signal - Answers- (A) E2B16 Which of the following is the video standard used by North American Fast Scan ATV stations? A. PAL B. DRM C. Scottie D. NTSC - Answers- (D) E2B17 Which of the following is NOT a characteristic of FMTV (Frequency-Modulated Amateur Television) as compared to vestigial sideband AM television? A. Immunity from fading due to limiting B. Poor weak signal performance C. Greater signal bandwidth D. Greater complexity of receiving equipment - Answers- (A) E2B18 What is the approximate bandwidth of a slow-scan TV signal? A. 600 Hz B. 3 kHz C. 2 MHz D. 6 MHz - Answers- (B) E2B19 On which of the following frequencies is one likely to find FMTV transmissions? A. 14.230 MHz B. 29.6 MHz C. 52.525 MHz D. 1255 MHz - Answers- (D) E2B20 What special operating frequency restrictions are imposed on slow scan TV transmissions? A. None; they are allowed on all amateur frequencies B. They are restricted to 7.245 MHz, 14.245 MHz, 21.345, MHz, and 28.945 MHz C. They are restricted to phone band segments and their bandwidth can be no greater than that of a voice signal of the same modulation type D. They are not permitted above 54 MHz - Answers- (C) E2B21 If 100 IRE units correspond to the most-white level in the NTSC standard video format, what is the level of the most-black signal? A. 140 IRE units B. 7.5 IRE units C. 0 IRE units D. - 40 IRE units - Answers- (B) E2C01 Which of the following is true about contest operating? A. Operators are permitted to make contacts even if they do not submit a log B. Interference to other amateurs is unavoidable and therefore acceptable C. It is mandatory to transmit the call sign of the station being worked as part of every transmission to that station D. Every contest requires a signal report in the exchange - Answers- (A) E2C02 Which of the following best describes "self spotting" in regards to contest operating? A. The generally prohibited practice of posting one's own call sign and frequency on a call sign spotting network B. The acceptable practice of manually
posting the call signs of stations on a call sign spotting network C. A manual technique for rapidly zero beating or tuning to a station's frequency before calling that station D. An automatic method for rapidly zero beating or tuning to a station's frequency before calling that station - Answers- (A) E2C03 From which of the following bands is amateur radio contesting generally excluded? A. 30 meters B. 6 meters C. 2 meters D. 33 cm - Answers- (A) E2C04 On which of the following frequencies is an amateur radio contest contact generally discouraged? A. 3.525 MHz B. 14.020 MHz C. 28.330 MHz D. 146.52 MHz - Answers- (D) E2C05 Which of the following frequencies would generally be acceptable for U.S. stations to work other U.S. stations in a phone contest? A. 5405 kHz B. 14.310 MHz C. 50.050 MHz D. 146.52 MHz - Answers- (B) E2C06 During a VHF/UHF contest, in which band segment would you expect to find the highest level of activity? A. At the top of each band, usually in a segment reserved for contests B. In the middle of each band, usually on the national calling frequency C. In the weak signal segment of the band, with most of the activity near the calling frequency D. In the middle of the band, usually 25 kHz above the national calling frequency - Answers- (C) E2C07 What is the Cabrillo format? A. A standard for organizing information in contest log files B. A method of exchanging information during a contest QSO C. The most common set of contest rules D. The rules of order for meetings between contest sponsors - Answers- (A) E2C08 Why are received spread-spectrum signals resistant to interference? A. Signals not using the spectrum-spreading algorithm are suppressed in the receiver B. The high power used by a spread-spectrum transmitter keeps its signal from being easily overpowered C. The receiver is always equipped with a digital blanker circuit D. If interference is detected by the receiver it will signal the transmitter to change frequencies - Answers- (A) E2C09 How does the spread-spectrum technique of frequency hopping (FH) work? A. If interference is detected by the receiver it will signal the transmitter to change frequencies B. If interference is detected by the receiver it will signal the transmitter to wait until the frequency is clear C. A pseudo-random binary bit stream is used to shift the phase of an RF carrier very rapidly in a particular sequence D. The frequency of the transmitted signal is changed very rapidly according to a particular sequence also used by the receiving station - Answers- (D) E2C10 Why might a phone DX station state that he is listening on another frequency? A. Because the DX station may be transmitting on a frequency that is prohibited to some responding stations B. To separate the calling stations from the DX station C. To
E2D06 Which of the following is a commonly used 2-meter APRS frequency? A. 144. MHz B. 144.39 MHz C. 145.02 MHz D. 146.52 MHz - Answers- (B) E2D07 Which of the following digital protocols is used by APRS? A. AX.25 B. 802.11 C. PACTOR D. AMTOR - Answers- (A) E2D08 Which of the following types of packet frames is used to transmit APRS beacon data? A. Connect frames B. Disconnect frames C. Acknowledgement frames D. Unnumbered Information frames - Answers- (D) E2D09 Under clear communications conditions, which of these digital communications modes has the fastest data throughput? A. AMTOR B. 170-Hz shift, 45 baud RTTY C. PSK31 D. 300-baud packet - Answers- (D) E2D10 How can an APRS station be used to help support a public service communications activity? A. An APRS station with an emergency medical technician can automatically transmit medical data to the nearest hospital B. APRS stations with General Personnel Scanners can automatically relay the participant numbers and time as they pass the check points C. An APRS station with a GPS unit can automatically transmit information to show a mobile station's position during the event D. All of these choices are correct - Answers- (C) E2D11 Which of the following data sources are needed to accurately transmit your geographical location over the APRS network? A. The NMEA-0183 formatted data from a Global Positioning System (GPS) satellite receiver B. The latitude and longitude of your location, preferably in degrees, minutes and seconds, entered into the APRS computer software C. The NMEA-0183 formatted data from a LORAN navigation system D. Any of these choices is correct - Answers- (D) E2E01 What is a common method of transmitting data emissions below 30 MHz? A. DTMF tones modulating an FM signal B. FSK/AFSK C. Pulse modulation D. Spread spectrum - Answers- (B) E2E02 What do the letters FEC mean as they relate to digital operation? A. Forward Error Correction B. First Error Correction C. Fatal Error Correction D. Final Error Correction - Answers- (A) E2E03 How is Forward Error Correction implemented? A. By the receiving station repeating each block of three data characters B. By transmitting a special algorithm to the receiving station along with the data characters C. By transmitting extra data that may be used to detect and correct transmission errors D. By varying the frequency shift of the transmitted signal according to a predefined algorithm - Answers- (C) E2E04 What is indicated when one of the ellipses in an FSK crossed-ellipse display suddenly disappears? A. Selective fading has occurred B. One of the signal filters has
saturated C. The receiver has drifted 5 kHz from the desired receive frequency D. The mark and space signal have been inverted - Answers- (A) E2E05 How does ARQ accomplish error correction? A. Special binary codes provide automatic correction B. Special polynomial codes provide automatic correction C. If errors are detected, redundant data is substituted D. If errors are detected, a retransmission is requested - Answers- (D) E2E06 What is the most common data rate used for HF packet communications? A. 48 baud B. 110 baud C. 300 baud D. 1200 baud - Answers- (C) E2E07 What is the typical bandwidth of a properly modulated MFSK16 signal? A. 31 Hz B. 316 Hz C. 550 Hz D. 2 kHz - Answers- (B) E2E08 Which of the following HF digital modes can be used to transfer binary files? A. Hellschreiber B. PACTOR C. RTTY D. AMTOR - Answers- (B) E2E09 Which of the following HF digital modes uses variable-length coding for bandwidth efficiency? A. RTTY B. PACTOR C. MT63 D. PSK31 - Answers- (D) E2E11 What is the Baudot code? A. A code used to transmit data only in modern computer-based data systems using seven data bits B. A binary code consisting of eight data bits C. An alternate name for Morse code D. The International Telegraph Alphabet Number 2 (ITA2) which uses five data bits - Answers- (D) E2E12 Which of these digital communications modes has the narrowest bandwidth? A. MFSK16 B. 170-Hz shift, 45 baud RTTY C. PSK31 D. 300-baud packet - Answers- (C) E3A01 What is the approximate maximum separation along the surface of the Earth between two stations communicating by moonbounce? A. 500 miles if the moon is at perigee B. 2000 miles, if the moon is at apogee C. 5000 miles, if the moon is at perigee D. 12,000 miles, as long as both can "see" the moon - Answers- (D) E3A02 What characterizes libration fading of an earth-moon-earth signal? A. A slow change in the pitch of the CW signal B. A fluttery irregular fading C. A gradual loss of signal as the sun rises D. The returning echo is several Hertz lower in frequency than the transmitted signal - Answers- (B) E3A03 When scheduling EME contacts, which of these conditions will generally result in the least path loss? A. When the moon is at perigee B. When the moon is full C. When the moon is at apogee D. When the MUF is above 30 MHz - Answers- (A) E3A04 What type of receiving system is desirable for EME communications? A. Equipment with very wide bandwidth B. Equipment with very low dynamic range C. Equipment with very low gain D. Equipment with very low noise figures - Answers- (D)