LIGHTING SAFETY & MAINTENANCE, Exercises of Music

NEVER run lights at 100%. If ran at 80% = extend life of lamp to 2000 hours!!!! NEVER touch the lamp!!! The oil from your fingers will cause the lamp to ...

Typology: Exercises

2022/2023

Uploaded on 03/14/2023

jamal33
jamal33 🇺🇸

4.3

(51)

340 documents

1 / 2

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
LIGHTING SAFETY & MAINTENANCE
1. ALWAYS KEEP EQUIPMENT IN GOOD WORKING CONDITION &
CLEAN.
2. MAINTAIN A CLEAN AND ORGANIZED WORKING ENVIRONMENT.
3. NEVER EAT OR DRINK NEAR LIGHT EQUIPMENT.
4. COVER THE SOUND BOARD AND EQUIPMENT WITH THE DUST
COVER.
5. ALWAYS UNPLUG A LIGHTING INSTRUMENT BEFORE SERVICING.
6. KEEP FINGERS OFF QUARTZ BULBS.
7. WEAR GLOVES WHEN HANGING AND FOCUSING LIGHT FIXTURES.
8. ALWAYS SECURE A SAFETY CABLE TO THE BATON AND YOKE.
9. SECURE ALL TOOLS TO YOURSELF WHEN IN THE CATWALK.
10. WEAR CLOSED-TOE, HARD-RUBBER SOLED, AT ALL TIMES.
11. NO ONE SHOULD EVER WIRE OR UNWIRE A PLUG.
12. REPORT ANY DAMP OR WET CONDITIONS IMMEDIATELY.
13. KNOW THE LOCATION OF THE CLOSEST FIRE EXTINGUISHER.
Continued………….
pf2

Partial preview of the text

Download LIGHTING SAFETY & MAINTENANCE and more Exercises Music in PDF only on Docsity!

LIGHTING SAFETY & MAINTENANCE

1. ALWAYS KEEP EQUIPMENT IN GOOD WORKING CONDITION &

CLEAN.

2. MAINTAIN A CLEAN AND ORGANIZED WORKING ENVIRONMENT.

3. NEVER EAT OR DRINK NEAR LIGHT EQUIPMENT.

4. COVER THE SOUND BOARD AND EQUIPMENT WITH THE DUST

COVER.

5. ALWAYS UNPLUG A LIGHTING INSTRUMENT BEFORE SERVICING.

6. KEEP FINGERS OFF QUARTZ BULBS.

7. WEAR GLOVES WHEN HANGING AND FOCUSING LIGHT FIXTURES.

8. ALWAYS SECURE A SAFETY CABLE TO THE BATON AND YOKE.

9. SECURE ALL TOOLS TO YOURSELF WHEN IN THE CATWALK.

10. WEAR CLOSED-TOE, HARD-RUBBER SOLED, AT ALL TIMES.

11. NO ONE SHOULD EVER WIRE OR UNWIRE A PLUG.

12. REPORT ANY DAMP OR WET CONDITIONS IMMEDIATELY.

13. KNOW THE LOCATION OF THE CLOSEST FIRE EXTINGUISHER.

Continued………….

LIGHT MAINTENANCE

NEVER run lights at 100%.

If ran at 80% = extend life of lamp to 2000 hours!!!!

NEVER touch the lamp!!!

The oil from your fingers will cause the lamp to blow when hot

CLEAN the lens and glass parts with rubbing alcohol.

CLEAN shutters with steel wool and graphite powder.

LIGHT FIXTURE CHECK LIST

As you begin hanging and focusing light fixtures,

double check and triple check the following:

light fixture is clean

lamp is there, and sitting in socket correctly

lenses are clean and not cracked

C-clamp is tightly secured to batten

Yoke bolt is tighten

both ends of cord are safe, not frayed or cut

barrel of fixture is tightly secured by screw

safety chain is around Yoke and batten