Mechanical aptitude testing Questions All Solved Correctly., Exams of Mechanics

Conductor - Answer any material that allows electricity to pass through it. Circuit - Answer Electricity traveling in a circular path. Three parts of circuit - Answer Source, path, load, and switch. (battery/wall plug). (wires). (lightbulb/buzzer). (control).

Typology: Exams

2025/2026

Available from 05/13/2026

Test-Solver
Test-Solver 🇺🇸

1

(1)

7.6K documents

1 / 7

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Mechanical aptitude testing Questions
All Solved Correctly.
Conductor - Answer any material that allows electricity to pass through it.
Circuit - Answer Electricity traveling in a circular path.
Three parts of circuit - Answer Source, path, load, and switch.
(battery/wall plug). (wires). (lightbulb/buzzer). (control).
Lightbulb in holder image - Answer circle with squigglie line inside
on off closed position image - Answer _-_ Electricity flowing.
1 1/2 VOLT BATTERY cylinder - Answer 1.5 -T t-
9 Volt two connect on top rectangle - Answer 9 v
6 volt two places connect aat top - Answer 6 v square
110 Volt regular wall extension - Answer AC power. Plug symbol or circle
with an S in the middle
Two wires crossing - Answer wires crossing + or with a dot in middle
Fuse - Answer Too much electricity flowing can heat up and burn or melt.
Big slanted S shape with lines.
Parallel circuit - Answer Has more than one electrical path
Short circuit - Answer Lets electricity flow w/o going to the load
If a car and a bowling ball fell off a 100 ft cliff at the same time, which would
hit the ground first?
A. Car
B Ball
pf3
pf4
pf5

Partial preview of the text

Download Mechanical aptitude testing Questions All Solved Correctly. and more Exams Mechanics in PDF only on Docsity!

Mechanical aptitude testing Questions

All Solved Correctly.

Conductor - Answer any material that allows electricity to pass through it. Circuit - Answer Electricity traveling in a circular path. Three parts of circuit - Answer Source, path, load, and switch. (battery/wall plug). (wires). (lightbulb/buzzer). (control). Lightbulb in holder image - Answer circle with squigglie line inside on off closed position image - Answer - Electricity flowing. 1 1/2 VOLT BATTERY cylinder - Answer 1.5 -T t- 9 Volt two connect on top rectangle - Answer 9 v 6 volt two places connect aat top - Answer 6 v square 110 Volt regular wall extension - Answer AC power. Plug symbol or circle with an S in the middle Two wires crossing - Answer wires crossing + or with a dot in middle Fuse - Answer Too much electricity flowing can heat up and burn or melt. Big slanted S shape with lines. Parallel circuit - Answer Has more than one electrical path Short circuit - Answer Lets electricity flow w/o going to the load If a car and a bowling ball fell off a 100 ft cliff at the same time, which would hit the ground first? A. Car B Ball

C. No diff - Answer C. No diff. Rate of the fall is the same, no matter the weight of the object. If a cannon fires a cannonball horizontally and you drop a cannonball at the same time, which will hit the ground first? A. Drop B. Fire C. No diff - Answer C. No diff Gravity pulls on both equally and both have the same distance before hitting ground. Magnets - Answer They all have a south pole an a north pole. N and P they will stick. P and P they will resist. Spur gear - Answer Has straight teeth on the outside edge. Driver - Answer The part of the gear that does the pushing. Gears are made of - Answer Plastic or metal Gear with fewer teeth - Answer Will move faster. To get the speed - Answer divide the # of teeth on one gear by the # of teeth on the other. Mitter gear - Answer Grooves cut at a slant. Turn horizontal or vertical. Pulley used for - Answer will it move, or how hard will it be to move a weight using the pulley Parts of a pulley - Answer Block (holds the wheel). Wheel (usually has a groove in it so the rope can go around the edge w/o falling off. 3 ways to lift a weight - Answer lift up by hand, pull across, and pull down. Thin wheel pulley - Answer Has a block with 2 hooks on both ends.

slotted head screw - Answer machine screw. electrical drill - Answer Trigger, handle, rechargable batt, bit, and a chuck. electrical saber saw - Answer Jigsaw. Cut wood. circular saw - Answer Wood working tool. Dangerous. To tighten a bolt? A. Slip joint pliers B. Channel lock pliers C. Combo Wrench D. Adjustable wrench - Answer C. Combo wrench North - Answer Canada South - Answer Mexico East - Answer Washington D.C. West - Answer Cali map Compass - Answer ect. compasses Legend symbols - Answer PS-Police station, FS- fire station, M-metro station, CH- city hall, P-playground, ect. 1 acre - Answer 43,560 square feet 1 barrel - Answer 42 gallons 1 fathom - Answer 6 feet 1 foot - Answer 12 inches

1 furlong - Answer 40 rods 1 gallon - Answer 3.785 liters 1 gallon - Answer 4 quarts 1 hand - Answer 10 centimeters 1 inch - Answer 2.54 centimeters 1 kilogram - Answer 1,000 grams 1 kilogram - Answer 2.2 pounds 1 kilometer - Answer 1,000 meters 1 mile to kilo - Answer 1.609 kilometers 1 mile to ft. - Answer 5,280 feet 3 mile/hour - Answer 4.4 feet/second 1 pint - Answer 4 gills 1 pound - Answer 16 ounces 1 quart - Answer 2 pints 1 slug - Answer 14.59 kilograms 1 square mile - Answer 640 acres 6 kilograms =? pounds a. 2. b. 6, c. 15.

D. 12.63 - Answer 10% of 23=2. 15% of 23=3. 2.3-3.45=5. 23.00-5.75=17. C. 17. How much force (in kg) do we need to use to lift the 120 kg weight? If we have 5 pulleys. - Answer 120 kg / 5= 24 kg