Mobile Crane NCCER study guide 2 2026, Exams of Nursing

Mobile Crane NCCER study guide 2 2026

Typology: Exams

2025/2026

Available from 04/23/2026

Talia00
Talia00 🇺🇸

5

(2)

5.2K documents

1 / 8

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Mobile Crane NCCER study guide
2 2026
In a two crane lift the center of gravity should be -
correct answers✅Closer to the crane with the greatest
capacity
For rubber-tired cranes working on rubber, the part of
the load chart governed by stability is based on what %
of the crane's capacity? - correct answers✅75%
As a general rue on tandem crane lifts neither crane
should be loaded greater than what % of net capacity -
correct answers✅75%
On long boom cranes, what is the major effect of
abruptly stopping a rapid swing? - correct
answers✅Action may overturn the crane or collapse
the boom
The most important thing to remember when
performing dual crane lifts is: - correct answers✅The
cranes should not be loaded beyond 75% of their rated
capacity
The total weight of a loaded personnel platform and
related rigging shall not exceed what % of the rated
capacity for the radius and configuration of a crane or
derrick - correct answers✅50%
pf3
pf4
pf5
pf8

Partial preview of the text

Download Mobile Crane NCCER study guide 2 2026 and more Exams Nursing in PDF only on Docsity!

In a two crane lift the center of gravity should be - correct answers ✅Closer to the crane with the greatest capacity For rubber-tired cranes working on rubber, the part of the load chart governed by stability is based on what % of the crane's capacity? - correct answers ✅75% As a general rue on tandem crane lifts neither crane should be loaded greater than what % of net capacity - correct answers ✅75% On long boom cranes, what is the major effect of abruptly stopping a rapid swing? - correct answers ✅Action may overturn the crane or collapse the boom The most important thing to remember when performing dual crane lifts is: - correct answers ✅The cranes should not be loaded beyond 75% of their rated capacity The total weight of a loaded personnel platform and related rigging shall not exceed what % of the rated capacity for the radius and configuration of a crane or derrick - correct answers ✅50%

Pre-operational inspections are necessary and required:

  • correct answers ✅Enhance cranes safety by discovering discrepancies prior to operating. If a crane has to be level to within 1% of grade, the maximum allowable variation in grade in a horizontal distance of 20' would be: - correct answers ✅2.4'' On a standard running rope, how many broken wires are cause for considering replacement? - correct answers ✅3 broken wires in one strand in one lay On a standing rope, how many wires need to be broken at an end connections before replacing? - correct answers ✅ 2 According to ASME B30.5, mobile crane standard, how many randomly distributed broken wires in rotation- resistant- rope is cause for considering replacement of the rope? - correct answers ✅2 broken wire in 6 rope diameters The lay length of a wire rope is defined as - correct answers ✅Distance of one strand as it makes one revolutions

IWRC stands for - correct answers ✅Independent wire rope core XIP - correct answers ✅Extra improved plow steel RRL - correct answers ✅Right Regular lay Preformed is defined as: - correct answers ✅Rope manufactured so that strands and wire stay together when it is cut tends to stay in the pre-formed shape at the cut ends Which type core provides the maximum flexibility to wire rope? - correct answers ✅Fiber core Which one of the following wire ropes should not be used in mulit-part reeving because it rapidly deteriorates usually internally with repeated bending? - correct answers ✅19x To determine how may cubic feet are in an object you must: - correct answers ✅Multiply by the length by the width by the height

For a truck crane to maintain a margin of safety against tipping backwards: - correct answers ✅Weight on lift carrier must not be less than 15% of total crane weight Which of the following is classified as a standing rope? - correct answers ✅Pendant line Working radius is defined as the distance from the: - correct answers ✅Center of rotation of the crane to the center of gravity of the load The dead-end of the wire rope above the wedge socket must extend minimum of 6 times the rope diameter of?

  • correct answers ✅6'' As you boom down the leverage of the load on the crane will - correct answers ✅Increase One of the most severe effects of being out of level is: - correct answers ✅Side load develops in the boom When Anti-two block device is activated what crane function will NOT work? - correct answers ✅Boom down

B. Extending the boom C. Working within the 12 inch minimum of boom tip Either end of a hoist rope that has to be cut must be cut by using a - correct answers ✅Cable cutter For supporting rated loads the design factor for live or running ropes that wind on drums or travel over sheaves shall not be less than: - correct answers ✅3. For supporting the boom and working attachments at recommended travel and transit positions and boom lengths the design factor for boom pendants or standing ropes shall not be less than: - correct answers ✅ 3 For supporting rated loads the design factor for rotation resistant rope shall be: - correct answers ✅5 or greater What crane movement does the far left control in the operator's cab create? - correct answers ✅Swing

All jibs on conventional type crane booms must have positive stops to prevent their movement of more than

  • correct answers ✅5 degrees above the straight line of the jib and boom Booms stop limit - correct answers ✅Angle of boom at highest postion If telescoping boom sections are not equally extended what could possibly happen: - correct answers ✅Possible failure of the longest section To verify that the boom angle indicator is reading properly you should: - correct answers ✅use a level When using wire rope clips to make wire rope slings you should remember to: - correct answers ✅never use wire rope clips to make a sling On wheel mounted cranes, braking shall be provided to bring the machine to a stop on level ground within a distance of 32' from a speed of: - correct answers ✅15mph