Module 6 Portage Learning Chemistry, Exams of Chemistry

Module 6 Portage Learning Chemistry Module 6 Portage Learning Chemistry

Typology: Exams

2022/2023

Available from 10/12/2023

Advancewrighter
Advancewrighter 🇺🇸

4.2

(13)

3.9K documents

1 / 4

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Module 6 Portage Learning Chemistry
1. Amorphous solids - answers>>particles are arranged in a random fashion
2. Colligative properties - answers>>physical properties of solvents that are dependent on
the concentration of the solute present and the identity of the solvent but not on the
identity of the solute. They include vapor pressure, freezing point and boiling point
3. Colloids - answers>>heterogeneous mixtures which appear to homogeneous one-phase
mixtures but are actually composed of particles too small to be seen with the naked eye
4. Condensation - answers>>process of gas being converted to liquid
5. Critical point - answers>>the temperature above which a substance cannot exist in the
liquid phase
6. Critical pressure - answers>>the lowest pressure required for the substance to exist as a
liquid at the critical point
7. Crystalline solids - answers>>particles are arranged in one of several different orderly,
repeating, geometric patterns
8. Electrolytes - answers>>ionic or very polar compounds which dissolve to form solutions
of ions which conduct an electric current
9. Fluids - answers>>substances like liquids and gases which have no fixed shape and so
they flow
10. Ionization - answers>>the splitting of molecules to form ions
11. Molality - answers>>the number of moles of solute present per kilogram of solvent
12. Molarity - answers>>the number of moles of solute present per liter of solution
13. Nonelectrolytes - answers>>compounds which dissolve to form solutions of molecules
which do not conduct an electric current
14. Phase - answers>>any state of matter such as solid, liquid or gas
15. Strong electrolytes - answers>>solutes that ionize completely
16. Sublimation - answers>>the conversion of a solid directly to the gas state
P a g e 1 | 4
pf3
pf4

Partial preview of the text

Download Module 6 Portage Learning Chemistry and more Exams Chemistry in PDF only on Docsity!

Module 6 Portage Learning Chemistry

  1. Amorphous solids - answers>>particles are arranged in a random fashion
  2. Colligative properties - answers>>physical properties of solvents that are dependent on the concentration of the solute present and the identity of the solvent but not on the identity of the solute. They include vapor pressure, freezing point and boiling point
  3. Colloids - answers>>heterogeneous mixtures which appear to homogeneous one-phase mixtures but are actually composed of particles too small to be seen with the naked eye
  4. Condensation - answers>>process of gas being converted to liquid
  5. Critical point - answers>>the temperature above which a substance cannot exist in the liquid phase
  6. Critical pressure - answers>>the lowest pressure required for the substance to exist as a liquid at the critical point
  7. Crystalline solids - answers>>particles are arranged in one of several different orderly, repeating, geometric patterns
  8. Electrolytes - answers>>ionic or very polar compounds which dissolve to form solutions of ions which conduct an electric current
  9. Fluids - answers>>substances like liquids and gases which have no fixed shape and so they flow
  10. Ionization - answers>>the splitting of molecules to form ions
  11. Molality - answers>>the number of moles of solute present per kilogram of solvent
  12. Molarity - answers>>the number of moles of solute present per liter of solution
  13. Nonelectrolytes - answers>>compounds which dissolve to form solutions of molecules which do not conduct an electric current
  14. Phase - answers>>any state of matter such as solid, liquid or gas
  15. Strong electrolytes - answers>>solutes that ionize completely
  16. Sublimation - answers>>the conversion of a solid directly to the gas state
  1. Surface tension - answers>>the force that causes a liquid which is in contact with a gas like air to assume a shape that has the least amount of surface area causing the surface to act like a thin elastic sheet
  2. Triple point - answers>>the temperature and pressure at which the solid, liquid and gas phases can coexist
  3. Vapor pressure - answers>>pressure exerted by vapor molecules above a liquid
  4. Weak electrolytes - answers>>solutes that only partially ionize
  5. Why are liquids the least common state of matter? - answers>>they can exist only within a relatively narrow range of temperatures and pressures
  6. Differentiate between evaporation and vaporization - answers>>Vaporization is the conversion of liquid particles to vapor at the boiling point temperature of the material. The process of liquid converting to vapor molecules can also take place in a very limited manner at temperatures lower than the boiling point and is called evaporation
  7. Differentiate between a crystal lattice and a unit cell - answers>>A crystal lattice is the orderly, repeating geometric pattern in which the particles of a crystalline solid are arranged. The unit cell is the smallest section of the crystal lattice having that arrangement of particles
  8. Why does a phase change occur at one temperature rather than over a temperature range? - answers>>During a phase change, the temperature of the material remains constant as all of the energy being added is being used to overcome forces of attraction between the particles and separate them so the temperature does not rise. Over any other portions of the temperature range, when a material is heated, the temperature of the material will rise as the energy added causes the molecules to move faster and demonstrate a higher temperature, which is really a measure of the kinetic energy of the molecules
  9. Why does diffusion take place quickly in a gas, more slowly in a liquid and not at all in a solid? - answers>>Diffusion is the non-energy-requiring movement of particles from regions of higher concentration to regions of lower concentration. Diffusion in a liquid occurs more slowly than in a gas since the gas particles are moving more rapidly. Solids do not show the property of diffusion since the particles in a solid can only vibrate around a fixed point rather than move throughout the sample.
  10. Explain water's concave meniscus in terms of cohesive and adhesive forces - answers>>Cohesive forces are the attractions between particles of the same type, such as the bonds between water molecules whereas adhesive forces are attractions between a particle of one type and particles of a different type, such as the bonds
  1. Why does a temperature increase usually increase the solubility of a solid? - answers>>Dissolving most solids is an endothermic process; doing so absorbs heat. Adding heat (by increasing the temperature of a solution) causes any dissolving process to change in the direction that consumes the added energy. For a solid or liquid, heat is absorbed as the solute dissolves in water (heat of solution is endothermic, requiring energy) so a solid or liquid is more soluble at a higher temperature
  2. Explain how and why the presence of a solute affects the vapor pressure of a solvent - answers>>The presence of a solute lowers the vapor pressure of a solvent because some of the solute particles occupy the space near the surface of the liquid replacing some of the solvent particles thereby decreasing the rate at which solvent particles can enter the vapor
  3. Explain how and why the presence of a solute affects the boiling point of a solvent - answers>>The presence of a solute raises the boiling point of a solvent by lowering the vapor pressure of the solvent. With this lower vapor pressure, more heat (a higher boiling point) is required to raise the vapor pressure to atmospheric pressure
  4. Explain how and why the presence of a solute affects the freezing point of a solvent - answers>>The presence of a solute lowers the freezing point of a solvent by forcing solvent molecules away from the growing solid crystal. In order for the solvent molecules to reach the crystal and add themselves to the freezing solid, they must be slowed down to a lower kinetic energy by lowering the temperature